To: | Xtreme Manufacturing, LLC (tmdocketing.colombo@hoveywilliams.com) |
Subject: | U.S. Trademark Application Serial No. 88690913 - XTREME - 53057 |
Sent: | February 25, 2020 10:28:58 AM |
Sent As: | ecom108@uspto.gov |
Attachments: | Attachment - 1 Attachment - 2 Attachment - 3 Attachment - 4 Attachment - 5 Attachment - 6 Attachment - 7 Attachment - 8 Attachment - 9 Attachment - 10 Attachment - 11 |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 88690913
Mark: XTREME
|
|
Correspondence Address: 10801 MASTIN BLVD., SUITE 1000
|
|
Applicant: Xtreme Manufacturing, LLC
|
|
Reference/Docket No. 53057
Correspondence Email Address: |
|
NONFINAL OFFICE ACTION
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: February 25, 2020
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issues below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
Trademark Act Section 2(d) - Likelihood of Confusion Refusal
Registration of the applied-for mark is refused because of a likelihood of confusion with the marks in U.S. Registration Nos. 4480414 and 5527619. Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq. See the attached registrations.
Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis: (1) the similarities between the compared marks and (2) the relatedness of the compared goods and/or services. See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.
The applicant’s mark is XTREME for “power-operated lifting and moving equipment, namely, fork lifts, telehandlers, and lifts” in Class 007 and “truck bed with powered foldable ramp for transporting and delivering commercial equipment; loading ramps” in Class 012.
The registered mark in U.S. Registration No. 4480414 is X-TREME GATE in stylized font for “cargo bed extender, namely, an extension for extending a cargo bed of a pickup truck for more storage space” in Class 012.
The registered mark in U.S. Registration No. 5527619 is EXTREME MAX for, among other goods, “power-operated motorcycle lifts; power-operated snowmobile lifts; power-operated boat lifts; driving devices for boat lifts; power-operated boat lifts; power-operated winches for boat lifts” in Class 007.
Similarity of Marks
Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression. Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v). “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.” In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)), aff’d per curiam, 777 F. App’x 516, 2019 BL 343921 (Fed. Cir. 2019); TMEP §1207.01(b).
In the instant case, the applicant’s mark XTREME is similar to the registered marks X-TREME and EXTREME because the marks feature a form of the similar term EXTREME.
Although the applicant’s mark XTREME and one of the registered marks X-TREME contain novel spellings for this term whereas the other registered mark contains the traditional spelling EXTREME, the marks are essentially phonetic equivalents and thus sound similar. Similarity in sound alone may be sufficient to support a finding that the marks are confusingly similar. In re White Swan Ltd., 8 USPQ2d 1534, 1535 (TTAB 1988); see In re 1st USA Realty Prof’ls, Inc., 84 USPQ2d 1581, 1586 (TTAB 2007); TMEP §1207.01(b)(iv).
Next, although one of the registered marks also contains the term GATE, this term is disclaimed and therefore less significant under a Section 2(d) analysis. Although marks are compared in their entireties, one feature of a mark may be more significant or dominant in creating a commercial impression. See In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Nat’l Data Corp., 753 F.2d 1056, 1058, 224 USPQ 749, 751 (Fed. Cir. 1985); TMEP §1207.01(b)(viii), (c)(ii). Disclaimed matter that is descriptive of or generic for a party’s goods and/or services is typically less significant or less dominant when comparing marks. In re Detroit Athletic Co., 903 F.3d 1297, 1305, 128 USPQ2d 1047, 1050 (Fed. Cir. 2018) (citing In re Dixie Rests., Inc., 105 F.3d 1405, 1407, 41 USPQ2d 1531, 1533-34 (Fed. Cir. 1997)); TMEP §1207.01(b)(viii), (c)(ii).
Additionally, although one of the registered marks appears in stylized lettering, a mark in typed or standard characters may be displayed in any lettering style; the rights reside in the wording or other literal element and not in any particular display or rendition. See In re Viterra Inc., 671 F.3d 1358, 1363, 101 USPQ2d 1905, 1909 (Fed. Cir. 2012); In re Mighty Leaf Tea, 601 F.3d 1342, 1348, 94 USPQ2d 1257, 1260 (Fed. Cir. 2010); 37 C.F.R. §2.52(a); TMEP §1207.01(c)(iii). Thus, a mark presented in stylized characters and/or with a design element generally will not avoid likelihood of confusion with a mark in typed or standard characters because the word portion could be presented in the same manner of display. See, e.g., In re Viterra Inc., 671 F.3d at 1363, 101 USPQ2d at 1909; Squirtco v. Tomy Corp., 697 F.2d 1038, 1041, 216 USPQ 937, 939 (Fed. Cir. 1983) (stating that “the argument concerning a difference in type style is not viable where one party asserts rights in no particular display”).
Here, both the applicant’s mark and the registered marks feature a form of the similar term EXTREME, thereby creating the same overall commercial impression. Therefore, the marks are confusingly similar.
Relatedness of Goods/Services
Here, as evidenced by the identification of goods/services in the instant application and cited registration, the applicant’s goods are closely related to the registrants’ goods, because the goods listed include lifts and truck parts for loading, storing, transporting equipment. Thus, the goods are similar in function and purpose and may be used together.
In this case, the application use(s) broad wording to describe lifts and loading ramps which presumably encompasses all goods of the type described, including registrants’ more narrow cargo bed extension, power-operated motorcycle, snowmobile and boat lifts. See, e.g., In re Solid State Design Inc., 125 USPQ2d 1409, 1412-15 (TTAB 2018); Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015). Thus, applicant’s and registrants’ goods are legally identical. See, e.g., In re i.am.symbolic, llc, 127 USPQ2d 1627, 1629 (TTAB 2018) (citing Tuxedo Monopoly, Inc. v. Gen. Mills Fun Grp., Inc., 648 F.2d 1335, 1336, 209 USPQ 986, 988 (C.C.P.A. 1981); Inter IKEA Sys. B.V. v. Akea, LLC, 110 USPQ2d 1734, 1745 (TTAB 2014); Baseball Am. Inc. v. Powerplay Sports Ltd., 71 USPQ2d 1844, 1847 n.9 (TTAB 2004)).
Additionally, the goods and/or services of the parties have no restrictions as to nature, type, channels of trade, or classes of purchasers and are “presumed to travel in the same channels of trade to the same class of purchasers.” In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)). Thus, applicant’s and registrants’ goods are related.
Accordingly, because confusion to source is likely, registration is refused under Trademark Act Section 2(d) based on a likelihood of confusion.
Applicant should note the following potential additional ground for refusal.
The filing date of pending U.S. Application Serial No. 88372226 precedes applicant’s filing date. See attached referenced application. If the mark in the referenced application registers, applicant’s mark may be refused registration under Trademark Act Section 2(d) because of a likelihood of confusion between the two marks. See 15 U.S.C. §1052(d); 37 C.F.R. §2.83; TMEP §§1208 et seq. Therefore, upon receipt of applicant’s response to this Office action, action on this application may be suspended pending final disposition of the earlier-filed referenced application.
In response to this Office action, applicant may present arguments in support of registration by addressing the issue of the potential conflict between applicant’s mark and the mark in the referenced application. Applicant’s election not to submit arguments at this time in no way limits applicant’s right to address this issue later if a refusal under Section 2(d) issues.
Identification and Classification of Goods – Class 012 only
Applicant may substitute the following wording, if accurate:
Class 012: “Truck bed with powered foldable ramp for transporting and delivering commercial equipment; {specify further nature/type because wording may encompass goods in multiple classes, e.g. loading ramps being truck parts}”
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
How to respond. Click to file a response to this nonfinal Office action.
/Natalie M. Polzer/
Natalie M. Polzer
Trademark Examining Attorney
Law Office 108
(571) 272-4103
natalie.polzer@uspto.gov
RESPONSE GUIDANCE