TEAS Request Reconsideration after FOA

PTO- 1960

Approved for use through 11/30/2023. OMB 0651-0050

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

---

PTO- 1960

Approved for use through 11/30/2023. OMB 0651-0050

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

Request for Reconsideration after Final Action

To the Commissioner for Trademarks:

Application serial no. 88680755 DOMINION(Standard Characters, see http://uspto.report/TM/88680755/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES

Applicant proposes to amend the following:

Current:
Class 007 for Machine parts, namely, ball bearings, double row ball bearings, cylindrical roller bearings, spherical thrust bearings, roller bearings, ball bearing inserts, spherical bearings, plain spherical bearings, ball bearing adapters, self-aligning ball bearings, thrust ball bearings, angular contact ball bearings, needle bearings, thrust needle bearings, thrust roller bearings, tapered roller bearings, journal bearings, linear bearings, linear shafting for ball bearings, magneto ball bearings, mounted ball bearings, mounted roller bearings, and all other types of anti-friction bearings, namely, stud type cam follower bearings, yoke type cam follower bearings, single row ball bearings, cartridge ball bearings, deep groove ball bearings, insert ball bearings, mast guide ball bearings, unground ball bearings, ball and needle combination bearings, ball and roller combination bearings, needle and roller combination bearings, flange ball bearings, plain flange bearings, roller flange bearings, hanger ball bearings, plain hanger bearings, roller hanger bearings, linear ball bearings, plain linear bearings, rail linear bearings, roller linear bearings, shafting linear bearings, rod end plain bearings, insert roller bearings, needle roller bearings, spherical roller bearings, slewing ring ball bearings, slewing ring roller bearings, take-up ball bearings, take-up frame bearings, plain take-up bearings, take-up roller bearings, pillow blocks ball bearings, plain pillow blocks bearings, pillow blocks roller bearings; machine parts, namely, bearing rod ends for use in industrial machines and machinery; machine parts, namely, pillow blocks and flange blocks; machine parts, namely, bearing adapter mounting sleeves, bearing removal sleeves; machine parts, namely, plummer blocks for bearings, bearing stabilizing rings, seal rings for bearings; seals for bearings; mechanical seals, namely, lip seals; keyless bushings, QD bushings, taper lock bushings for use as parts of machines; roller chain being parts of machines; chain couplings, coupling elements, geared couplings, coupling hubs, jaw couplings, rigid couplings, all for machines; lip seals as machine components; machine parts, namely, plain bore sheaves, QD sheaves, taper lock sheaves, variable pitch sheaves; machinery timing components, namely, plain bore sprockets, QD sprockets, taper lock sprockets
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.


Proposed:

Tracked Text Description: Machine parts, namely, ball bearings, double row ball bearings, cylindrical roller bearings, spherical thrust bearings, roller bearings, ball bearing inserts, spherical bearings, plain spherical bearings, ball bearing adapters, self-aligning ball bearings, thrust ball bearings, angular contact ball bearings, needle bearings, thrust needle bearings, thrust roller bearings, tapered roller bearings, journal bearings, linear bearings, linear shafting for ball bearings, magneto ball bearings, mounted ball bearings, mounted roller bearings, and all other types of anti-friction bearings, namely, stud type cam follower bearings, yoke type cam follower bearings, single row ball bearings, cartridge ball bearings, deep groove ball bearings, insert ball bearings, mast guide ball bearings, unground ball bearings, ball and needle combination bearings, ball and roller combination bearings, needle and roller combination bearings, flange ball bearings, plain flange bearings, roller flange bearings, hanger ball bearings, plain hanger bearings, roller hanger bearings, linear ball bearings, plain linear bearings, rail linear bearings, roller linear bearings, shafting linear bearings, rod end plain bearings, insert roller bearings, needle roller bearings, spherical roller bearings, slewing ring ball bearings, slewing ring roller bearings, take-up ball bearings, take-up frame bearings, plain take-up bearings, take-up roller bearings, pillow blocks ball bearings, plain pillow blocks bearings, pillow blocks roller bearings; machine parts, namely, bearing rod ends for use in industrial machines and machinery; machine parts, namely, bearing rod ends for use in industrial machines, namely, mining, sawmills, and pulp and paper machinery; machine parts, namely, pillow blocks and flange blocks; machine parts, namely, bearing adapter mounting sleeves, bearing removal sleeves; machine parts, namely, plummer blocks for bearings, bearing stabilizing rings, seal rings for bearings; machine parts, namely, plummer blocks for bearings, bearing stabilizing rings; seals for bearings; machine parts, namely, seals for bearings; mechanical seals, namely, lip seals; keyless bushings, QD bushings, taper lock bushings for use as parts of machines; roller chain being parts of machines; chain couplings, coupling elements, geared couplings, coupling hubs, jaw couplings, rigid couplings, all for machines; lip seals as machine components; machine parts, namely, plain bore sheaves, QD sheaves, taper lock sheaves, variable pitch sheaves; machinery timing components, namely, plain bore sprockets, QD sprockets, taper lock sprockets; machinery timing components, namely, plain bore sprockets, QD sprockets, taper lock sprockets.Class 007 for Machine parts, namely, ball bearings, double row ball bearings, cylindrical roller bearings, spherical thrust bearings, roller bearings, ball bearing inserts, spherical bearings, plain spherical bearings, ball bearing adapters, self-aligning ball bearings, thrust ball bearings, angular contact ball bearings, needle bearings, thrust needle bearings, thrust roller bearings, tapered roller bearings, journal bearings, linear bearings, linear shafting for ball bearings, magneto ball bearings, mounted ball bearings, mounted roller bearings, and all other types of anti-friction bearings, namely, stud type cam follower bearings, yoke type cam follower bearings, single row ball bearings, cartridge ball bearings, deep groove ball bearings, insert ball bearings, mast guide ball bearings, unground ball bearings, ball and needle combination bearings, ball and roller combination bearings, needle and roller combination bearings, flange ball bearings, plain flange bearings, roller flange bearings, hanger ball bearings, plain hanger bearings, roller hanger bearings, linear ball bearings, plain linear bearings, rail linear bearings, roller linear bearings, shafting linear bearings, rod end plain bearings, insert roller bearings, needle roller bearings, spherical roller bearings, slewing ring ball bearings, slewing ring roller bearings, take-up ball bearings, take-up frame bearings, plain take-up bearings, take-up roller bearings, pillow blocks ball bearings, plain pillow blocks bearings, pillow blocks roller bearings; machine parts, namely, bearing rod ends for use in industrial machines, namely, mining, sawmills, and pulp and paper machinery; machine parts, namely, pillow blocks and flange blocks; machine parts, namely, bearing adapter mounting sleeves, bearing removal sleeves; machine parts, namely, plummer blocks for bearings, bearing stabilizing rings; machine parts, namely, seals for bearings; mechanical seals, namely, lip seals; keyless bushings, QD bushings, taper lock bushings for use as parts of machines; roller chain being parts of machines; chain couplings, coupling elements, geared couplings, coupling hubs, jaw couplings, rigid couplings, all for machines; lip seals as machine components; machine parts, namely, plain bore sheaves, QD sheaves, taper lock sheaves, variable pitch sheaves; machinery timing components, namely, plain bore sprockets, QD sprockets, taper lock sprockets.
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Webpage URL: None Provided
Webpage Date of Access: None Provided

Correspondence Information (current):
      Matthew R. Wilmot
      PRIMARY EMAIL FOR CORRESPONDENCE: TM-PDX@STOEL.COM
      SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): patrick.hartigan@stoel.com

The docket/reference number is 39167-9.
Correspondence Information (proposed):
      Matthew R. Wilmot
      PRIMARY EMAIL FOR CORRESPONDENCE: TM-PDX@STOEL.COM
      SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): patrick.hartigan@stoel.com

The docket/reference number is 39167-9.

Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the owner/holder and the owner's/holder's attorney, if appointed, and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).

SIGNATURE(S)
Request for Reconsideration Signature
Signature: /Matthew R. Wilmot/     Date: 04/08/2021
Signatory's Name: Matthew R. Wilmot
Signatory's Position: Attorney of record, Oregon Bar member

Signatory's Phone Number: (503) 294-9851 Signature method: Sent to third party for signature

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

The applicant is not filing a Notice of Appeal in conjunction with this Request for Reconsideration.

Mailing Address:    Matthew R. Wilmot
   STOEL RIVES LLP
   
   760 SW NINTH AVENUE, SUITE 3000
   PORTLAND, Oregon 97205
Mailing Address:    Matthew R. Wilmot
   STOEL RIVES LLP
   760 SW NINTH AVENUE, SUITE 3000
   PORTLAND, Oregon 97205
        
Serial Number: 88680755
Internet Transmission Date: Thu Apr 08 19:02:13 ET 2021
TEAS Stamp: USPTO/RFR-XXX.XX.XXX.XX-2021040819021368
2348-88680755-770d9282e494dc88f23258a262
fc79e3af865487f161c8b457371d481d1c9ef719
1-N/A-N/A-20210408144328683388