Trademark/Service Mark Application, Principal Register
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1478 (Rev 09/2006)
OMB No. 0651-0009 (Exp 02/28/2021)
Trademark/Service Mark Application, Principal Register
*DESCRIPTION OF THE MARK
(and Color Location, if applicable)
The mark consists of the term HARDBANDING and the term SOLUTIONS in capital letters. The term HARBANDING is positioned above the term SOLUTIONS and
both are left justified, the letter "S" of the term SOLUTIONS being directly below the letter "H" of the term HARDBANDING. A pattern of three uniformly spaced arcuate segments is positioned to the
left of the terms HARDBANDING and SOLUTIONS, the pattern being centered vertically with respect to the terms. The three uniformly spaced arcuate segments representing portions of three uniformly
spaced annular rings.
PIXEL COUNT ACCEPTABLE
NO
PIXEL COUNT
2550 x 3300
REGISTER
Principal
APPLICANT INFORMATION
*OWNER OF MARK
Postle Industries, Inc.
*STREET
3800 East 91st Street
*CITY
Cleveland
*STATE
(Required for U.S. applicants)
Ohio
*COUNTRY
United States
*ZIP/POSTAL CODE
(Required for U.S. and certain international addresses)
44105
LEGAL ENTITY INFORMATION
TYPE
corporation
STATE/COUNTRY OF INCORPORATION
Delaware
GOODS AND/OR SERVICES AND BASIS INFORMATION
INTERNATIONAL CLASS
006
*IDENTIFICATION
WELDING WIRES FOR HARDFACING AND HARDBANDING, NAMELY, WELDING WIRES USED FOR THE APPLICATION OF WELD MATERIAL ON THE INNER OR OUTER SURFACE OF
DRILLING TOOLS, NAMELY, TOOL JOINTS, DRILL COLLARS, DOWN HOLE TOOLS AND DRILL BITS, USED FOR DRILLING AND BORING OPERATIONS SUCH AS DRILLING OIL AND GAS WELLS, WATER WELLS, EPA TEST WELLS, SOIL
TESTING, CORE SAMPLING, DIRECTIONAL DRILLING, TUNNELING AND HORIZONTAL DIRECTIONAL DRILLING, TO REDUCE WEAR OF SAID DRILLING TOOLS
image of the mark imprinted on or attached to a product, a product's container, a product's label, a product's hangtag, a product's
packaging, or printed in or on a manual or document shipped with the product of at least one of the goods listed in the goods description of the subject registration, the specimen showing the mark in
use and in use in U.S. commerce
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1478 (Rev 09/2006)
OMB No. 0651-0009 (Exp 02/28/2021)
Trademark/Service Mark Application, Principal Register
Serial Number:88650011
Filing Date:10/10/2019
To the Commissioner for Trademarks:
MARK: HARDBANDING SOLUTIONS (stylized and/or with design, see mark)
The literal element of the mark consists of HARDBANDING SOLUTIONS. The mark consists of the term HARDBANDING and the term SOLUTIONS in capital letters. The term HARBANDING is positioned above the
term SOLUTIONS and both are left justified, the letter "S" of the term SOLUTIONS being directly below the letter "H" of the term HARDBANDING. A pattern of three uniformly spaced arcuate segments is
positioned to the left of the terms HARDBANDING and SOLUTIONS, the pattern being centered vertically with respect to the terms. The three uniformly spaced arcuate segments representing portions of
three uniformly spaced annular rings.
The applicant, Postle Industries, Inc., a corporation of Delaware, having an address of
3800 East 91st Street
Cleveland, Ohio 44105
United States
requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C.
Section 1051 et seq.), as amended, for the following:
International Class 006: WELDING WIRES FOR HARDFACING AND HARDBANDING, NAMELY, WELDING WIRES USED FOR THE APPLICATION OF WELD MATERIAL ON THE INNER OR OUTER SURFACE OF DRILLING TOOLS, NAMELY,
TOOL JOINTS, DRILL COLLARS, DOWN HOLE TOOLS AND DRILL BITS, USED FOR DRILLING AND BORING OPERATIONS SUCH AS DRILLING OIL AND GAS WELLS, WATER WELLS, EPA TEST WELLS, SOIL TESTING, CORE SAMPLING,
DIRECTIONAL DRILLING, TUNNELING AND HORIZONTAL DIRECTIONAL DRILLING, TO REDUCE WEAR OF SAID DRILLING TOOLS
In International Class 006, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 03/00/2016, and first used in
commerce at least as early as 03/00/2016, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any
item in the class of listed goods/services, consisting of a(n) image of the mark imprinted on or attached to a product, a product's container, a product's label, a product's hangtag, a product's
packaging, or printed in or on a manual or document shipped with the product of at least one of the goods listed in the goods description of the subject registration, the specimen showing the mark in
use and in use in U.S. commerce.
The applicant hereby appoints George L. Pinchak. George L. Pinchak of Tarolli, Sundheim, Covell & Tummino LLP, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX,
is located at
Suite 1700
1300 East Ninth Street
Cleveland, Ohio 44114
United States
216-621-2234 x145(phone)
216-621-4072(fax)
gpinchak@tarolli.com (authorized).
The attorney docket/reference number is POS-193503US.
George L. Pinchak submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S.
Commonwealth or territory.
The applicant's current Correspondence Information:
Email Authorization: I authorize the USPTO to send email correspondence concerning the application to the applicant, the applicant's attorney, or the applicant's domestic representative at the
email address provided in this application. I understand that a valid email address must be maintained and that the applicant or the applicant's attorney must file the relevant subsequent
application-related submissions via the Trademark Electronic Application System (TEAS). Failure to do so will result in the loss of TEAS Reduced Fee status and a requirement to submit an additional
processing fee of $125 per international class of goods/services.
A fee payment in the amount of $275 has been submitted with the application, representing payment for 1 class(es).
Declaration
Declaration Signature
Signature: /george l. pinchak/ Date: 10/10/2019
Signatory's Name: George L. Pinchak
Signatory's Position: Attorney of record, Ohio bar member
Payment Sale Number: 88650011
Payment Accounting Date: 10/10/2019
Serial Number: 88650011
Internet Transmission Date: Thu Oct 10 16:43:24 EDT 2019
TEAS Stamp: USPTO/BAS-XX.XX.XXX.XXX-2019101016432416
2445-88650011-610d99aee4a7c2af680b45ea8c
2ba56ca82f0dba3164813f854336d72f9483ebe-
CC-43226588-20191010160532752795