To: | Baker Hughes, a GE Company (dallastrademarks@bakermckenzie.com) |
Subject: | U.S. Trademark Application Serial No. 88643061 - 50654608 |
Sent: | January 13, 2020 02:02:31 PM |
Sent As: | ecom104@uspto.gov |
Attachments: |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 88643061
|
|
Correspondence Address: 1900 N. PEARL STREET, SUITE 1500
|
|
Applicant: Baker Hughes, a GE Company
|
|
Reference/Docket No. 50654608
Correspondence Email Address: |
|
NONFINAL OFFICE ACTION
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: January 13, 2020
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
Search Results
The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).
Identification and Classification of Goods and Services
The wording “house mark for electronic and telemetry instruments for use in the oil and gas industry” in the identification of goods for International Class 07 must be clarified because it is too broad and could include goods in other international classes. See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03. Generally, electronic and telemetry instruments belong in Class 09.
The wording “house mark for metallic and non-metallic drill bits and drill bit cutters” in the identification of goods for International Class 07 must be clarified because it is too broad and could include goods in other international classes. See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03. While bits for power drills belong in Class 07, bits for hand drills belong in Class 08.
The wording “house mark for expandable tubular products for use in the oil and gas industry” in the identification of goods for International Class 07 must be clarified because it is too broad and could include goods in other international classes. See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03. While nonmetal tubular liners for the lining of oil and gas systems belong in Class 19, metal tubes for industrial use belong in Class 06.
The wording “house mark for measurement and control equipment for oil and gas, aerospace, automotive, power and energy industries” in the identification of goods for International Class 07 must be clarified because it is too broad and could include goods in other international classes. See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03. Generally, measurement and control equipment belong in Class 09 unless the goods are specified as a hydraulic control.
The wording “House mark for consulting services in the field of oil and gas” in the identification of services for International Class 37 must be clarified because it is too broad and could include services in other international classes. See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03. Specifically, consulting services are classified according to the subject matter of the consulting services. For example, technical consulting in the field of oil and gas production and processing belongs in Class 37 while consultation in the field of design for oil and gas machines belongs in Class 42.
The wording “house mark for consulting services related to the design, installation and optimization of turbines and compressors and related equipment in the oil, gas and industrial industries” in Class 37 must be clarified because it is too broad and could include services in other international classes. See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03. While installation consultation generally belongs in Class 37, design consultation belongs in Class 37.
The following is an amended version of applicant’s identification of goods and/or services that complies with the above-mentioned clarification requirements, with additions and
alterations in bold type. The italicized wording includes additional guidance and suggestions and the wording appearing with a strikethrough should be deleted.
Applicant may adopt the following identification of goods and/or services, if accurate:
CLASS 01 is definite
CLASS 06: House mark for subsea wellheads and related equipment, namely, {specify the common commercial name of the goods, e.g., metal casings used to stabilize the wellbore in oil and gas wells}
CLASS 07: House mark for machines, tools and equipment for use in the oil and gas field, namely, {specify the nature of the goods,
e.g., oil refining machines}; house mark for artificial lift systems comprising {specify Class 07 goods, e.g., power operated lifts} for use in oil
and gas wells and components therefor; house mark for electronic and telemetry instruments for use in the oil and gas industry; house mark for metallic and non-metallic
drill bits for power drills and drill bit cutters being metal working machines; house mark for expandable tubular products for use in
the oil and gas industry; house mark for measurement and control equipment for oil and gas, aerospace, automotive, power and energy industries, namely, {hydraulic controls for machines and engines}; house mark for turbines not being for land vehicles, machine compressors, valves being parts of machines, centrifugal pumps, and {specify the common commercial name of the “other equipment”} for the oil and gas, pipeline,
petrochemical and industrial fields
CLASS 09: House mark for measurement and control apparatus for use in the oil and gas field, namely, {specify the common commercial name of the goods, e.g., control valves for regulating the flow of gases and oils}; house mark for measuring, detecting and monitoring instruments for industrial applications, namely, {specify the common commercial name of the goods, e.g., control valves for regulating the flow of gases and oils}; house mark for nondestructive testing equipment used in industrial applications, namely, {specify the common commercial name of the goods, e.g., gas testing instruments}; downloadable computer software for use in data collection, transmission, integration, visualization, analysis and storage in the field of oil and gas; downloadable computer software for use in connection with a network of physical objects, devices, vehicles, and buildings which are embedded with electronics, software, sensors and network connectivity all of which enable these objects, devices, vehicles, and buildings to collect and exchange and report data in the field of oil and gas; downloadable software for use in measuring and analyzing data retrieved from oil and gas wells; house mark for electronic and telemetry instruments for use in the oil and gas industry, namely, {specify the common commercial name of the goods, e.g., gas flow meters}; house mark for measurement and control equipment for oil and gas, aerospace, automotive, power and energy industries, namely, {specify the common commercial name of the goods, e.g., gas sensors for measuring gas concentration, gasometers}
CLASS 19: House mark for expandable tubular products for use in the oil and gas industry, namely, expandable nonmetal tubular liners for the lining of oil and gas systems [ADDITIONAL CLASS REQUIRED]
CLASS 37: House mark for consulting services in the field of oil and gas, namely, consultation in the field of offshore oil and gas facility
construction; house mark for consulting services in the field of carbon capture and sequestration; house mark for technical consulting services relating to the
installation of equipment, control systems, machinery, and facility construction, all in the oil and gas field; house mark for consulting services related to the design,
installation and maintenance of turbines and compressors and related equipment in the oil, gas and industrial industries; house mark for measurement and
inspection services in the oil and gas, aerospace, automotive, chemical, power and energy industries; house mark for consulting, design and commissioning and integration services for industrial
control systems; House mark for oil and gas drilling and construction completion;
CLASS 40: House mark for well measurement, monitoring and treatment services in the oil and gas field; house mark for equipment treatment
services in the oil and gas field; house mark for measurement, monitoring and treatment services of chemicals and petrochemicals; house mark for compressor, turbine, and
centrifugal pump treatment services; House mark for consulting services in the field of oil and gas, namely, technical consulting in the field of oil and gas production and
processing; house mark for the production of oil and gas
CLASS 41: House mark for educational services, namely, conducting classes, seminars, conferences, and workshops in the fields of oil and gas exploration; house mark for educational services, namely, training in the use and operation of turbines, compressor sand centrifugal pumps; house mark for educational services, namely, training in the use and operation of monitoring, inspection, testing and control equipment
CLASS 42: House mark for oil and gas drilling, completion, production and testing services, namely, testing the
functionality of apparatus and instruments in the nature of oil and gas equipment; house mark for the exploration and searching of oil and gas; house mark for providing industrial measurement and
control services; house mark for technical assessment, evaluation and optimization for turbine, compressor, centrifugal pump use in oil and gas and industrial applications; house mark for software as
a service (saas) services featuring software that combines autonomic computing and cognitive artificial intelligence engineering technology for use in the oil and gas industry; software as a service
(saas) services featuring software for use in collecting, analyzing, and delivering data and information to optimize performance in the industrial process, equipment and production systems across the
upstream, midstream and downstream segments of the oil and gas industry; house mark for consulting services in the field of oil and gas, namely, consultation in the field of design
for oil and gas machines; house mark for engineering consultation services in the field of carbon capture and sequestration; house mark for consulting
services related to the design of turbines and compressors and related equipment in the oil, gas and industrial industries; house mark for measurement and inspection services for quality control
purposes in the oil and gas, aerospace, automotive, chemical, power and energy industries; house mark for design and it integration services for industrial control systems; house mark for well
measurement and monitoring services for quality control in the oil and gas field; house mark for measurement and monitoring services
for quality control of chemicals and petrochemicals
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
ADVISORY: MULTIPLE-CLASS APPLICATION
(1) List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class.
(2) Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule). The application identifies goods and/or services that are classified in at least 9 classes; however, applicant submitted a fee(s) sufficient for only 8 class(es). Applicant must either submit the filing fees for the classes not covered by the submitted fees or restrict the application to the number of classes covered by the fees already paid.
See 15 U.S.C. §§1051(b), 1112, 1126(e); 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(2)-(3), 2.86(a); TMEP §§1403.01, 1403.02(c).
See an overview of the requirements for a Section 1(b) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.
To clarify how black, white and/or gray are being used in the mark, applicant may satisfy one of the following:
(1) If black, white and/or gray are a feature of the mark, applicant must amend the color claim to include them and amend the description to identify where black, white and/or gray appear in the literal and/or design elements of the mark. The following color claim and description are suggested, if accurate:
Color claim: “The colors green and white are claimed as a feature of the mark.”
Description: “The mark consists of a stylized design of a Mobius twist in green with a white interior.”
(2) If black, white and/or gray are not a feature of the mark, applicant must amend the description to state that black, white, and/or gray represent background, outlining, shading and/or transparent areas and are not part of the mark. The following description is suggested, if accurate:
“The mark consists of a stylized design of a Mobius twist in green. The color white in the mark appears for background purposes only and is not claimed as a feature of the mark.”
TMEP §807.07(d).
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
CONTACT INFORMATION
How to respond. Click to file a response to this nonfinal Office action.
/Christine Martin/
Examining Attorney
Law Office 104
571-272-1630
christine.martin@uspto.gov
RESPONSE GUIDANCE