To: | International Carbide Technology Co., Lt ETC. (RKL@RKLPATLAW.COM) |
Subject: | U.S. Trademark Application Serial No. 88641331 - CINCA - MR3939-36 |
Sent: | January 15, 2020 10:50:28 AM |
Sent As: | ecom112@uspto.gov |
Attachments: | Attachment - 1 Attachment - 2 Attachment - 3 Attachment - 4 Attachment - 5 Attachment - 6 Attachment - 7 Attachment - 8 Attachment - 9 Attachment - 10 Attachment - 11 Attachment - 12 Attachment - 13 Attachment - 14 Attachment - 15 Attachment - 16 Attachment - 17 Attachment - 18 Attachment - 19 Attachment - 20 Attachment - 21 Attachment - 22 Attachment - 23 |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 88641331
Mark: CINCA
|
|
Correspondence Address: 3458 ELLICOTT CENTER DRIVE-SUITE 101
|
|
Applicant: International Carbide Technology Co., Lt ETC.
|
|
Reference/Docket No. MR3939-36
Correspondence Email Address: |
|
NONFINAL OFFICE ACTION
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: January 15, 2020
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION
Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods and/or services of the parties. See 15 U.S.C. §1052(d). Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”). In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017). Only those factors that are “relevant and of record” need be considered. M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018).
Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis: (1) the similarities between the compared marks and (2) the relatedness of the compared goods and/or services. See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.
Here, applicant’s applied-for mark is “CINCA” in stylized characters with a design element for “Fireproof paints; fireproof coatings; fireproofing preparations” currently in Class 2. Registrant’s mark is “INCA” in stylized characters with a design element for “Thermal surface insulating coatings in the nature of paints, for use in new construction” in Class 2.
SIMILARITY OF THE MARKS
Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression. Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v). “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.” In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)); TMEP §1207.01(b).
Here, applicant’s mark is “CINCA” in stylized characters with the “C” being larger and placed in two concentric hexagons, while registrant’s mark is “INCA” stylized characters to the right of a stylized sun design. When evaluating a composite mark consisting of words and a design, the word portion is normally accorded greater weight because it is likely to make a greater impression upon purchasers, be remembered by them, and be used by them to refer to or request the goods and/or services. In re Aquitaine Wine USA, LLC, 126 USPQ2d 1181, 1184 (TTAB 2018) (citing In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012)); TMEP §1207.01(c)(ii). Thus, although marks must be compared in their entireties, the word portion is often considered the dominant feature and is accorded greater weight in determining whether marks are confusingly similar, even where the word portion has been disclaimed. In re Viterra Inc., 671 F.3d at 1366-67, 101 USPQ2d at 1911 (citing Giant Food, Inc. v. Nation’s Foodservice, Inc., 710 F.2d 1565, 1570-71, 218 USPQ2d 390, 395 (Fed. Cir. 1983)).
In this case, the wording “CINCA” sounds similar to registrant’s mark “INCA” – the only difference being the addition of the letter “C” to the front of the word in applicant’s mark. Further, since the “C” in applicant’s mark is set apart by larger font and the hexagonal design element, the remainder of the wording, “-INCA”, has a similar appearance as “INCA” in registrant’s mark, thereby creating a similar overall commercial impression. Marks may be confusingly similar in appearance where similar terms or phrases or similar parts of terms or phrases appear in the compared marks and create a similar overall commercial impression. See Crocker Nat’l Bank v. Canadian Imperial Bank of Commerce, 228 USPQ 689, 690-91 (TTAB 1986), aff’d sub nom. Canadian Imperial Bank of Commerce v. Wells Fargo Bank, Nat’l Ass’n, 811 F.2d 1490, 1495, 1 USPQ2d 1813, 1817 (Fed. Cir. 1987) (finding COMMCASH and COMMUNICASH confusingly similar); In re Corning Glass Works, 229 USPQ 65, 66 (TTAB 1985) (finding CONFIRM and CONFIRMCELLS confusingly similar); In re Pellerin Milnor Corp., 221 USPQ 558, 560 (TTAB 1983) (finding MILTRON and MILLTRONICS confusingly similar); TMEP §1207.01(b)(ii)-(iii). Therefore, applicant’s and registrant’s marks are similar because they have a similar sound, appearance, and overall commercial impression.
Thus, the marks are similar for likelihood of confusion purposes.
RELATEDNESS OF THE GOODS
As noted above, applicant’s mark is for “fireproof paints; fireproof coatings; fireproofing preparations” in Class 2, and registrant’s mark is for “Thermal surface insulating coatings in the nature of paints, for use in new construction” in Class 1.
The attached Internet evidence, consisting of third party websites and articles, establishes that the same entity commonly manufactures the relevant goods and markets the goods under the same mark. See attached evidence from Morgan Advanced Materials and SPI Coatings, available at http://morganfireprotection.com/en-gb/products/firemaster-firebarrier/, http://www.morganthermalceramics.com/en-gb/products/high-temperature-insulating-fibre-products/pumpables-moldables-coatings-and-cement-high-temperature-insulation-fibres/, http://spicoatings.com/omega-fire/, and http://spicoatings.com/super-therm/, respectively, which demonstrates that fire proof paints and coatings and heat insulating paints and coatings are those which may emanate from a single source; see also, attached evidence from Bob Vila and Superior Coating Solutions, available at http://www.bobvila.com/articles/395-ceramic-coatings-for-increased-insulation/ and http://superiorcoatingsolutions.com/super-therm/, respectively, which demonstrates that in some instances fire proof paints and coatings and heat insulating paints and coatings are one in the same, being distinct features of the same goods. Thus, applicant’s and registrant’s goods are considered related for likelihood of confusion purposes. See, e.g., In re Davey Prods. Pty Ltd., 92 USPQ2d 1198, 1202-04 (TTAB 2009); In re Toshiba Med. Sys. Corp., 91 USPQ2d 1266, 1268-69, 1271-72 (TTAB 2009).
Thus, the goods are related for likelihood of confusion purposes.
Therefore, applicant’s mark is refused under Section 2(d) for likelihood of confusion purposes because the marks are similar and the goods are related.
CLASSIFICATION & IDENTIFICATION OF GOODS AMENDMENT REQUIRED
Applicant may substitute the following wording, if accurate:
Class 1 (new): Fireproofing preparations
Class 2: Fireproof paints; fireproof coatings,
namely, ___________ {specify nature of goods in Class 2, e.g., “fireproof paints,” “fireproof coatings comprised of stucco,” etc. }; fireproofing preparations
Class 19 (new): Fireproof coatings, namely, ___________ {specify nature of goods in Class 19, e.g., “fireproof cement coatings,” etc. }
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
MULTIPLE-CLASS APPLICATION REQUIREMENTS
(1) List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class (for example, International Class 3: perfume; International Class 18: cosmetic bags sold empty).
(2) Submit a filing fee for each international class not covered by the fee already paid (view the USPTO’s current fee schedule). Specifically, the application identifies goods and/or services based on use in commerce that are classified in at least 3 classes; however, applicant submitted a fee sufficient for only 1 class. Applicant must either (a) submit the filing fees for the classes not covered by the submitted fees or (b) restrict the application to the number of classes covered by the fees already paid.
(3) Submit verified dates of first use of the mark anywhere and in commerce for each international class. See more information about verified dates of use.
(4) Submit a specimen for each international class. The current specimen is not acceptable for any international class. See more information about specimens.
Examples of specimens for goods include tags, labels, instruction manuals, containers, and photographs that show the mark on the actual goods or packaging, or displays associated with the actual goods at their point of sale. Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods.
Examples of specimens for services include advertising and marketing materials, brochures, photographs of business signage and billboards, and website printouts that show the mark used in the actual sale, rendering, or advertising of the services.
(5) Submit a verified statement that “The specimen was in use in commerce on or in connection with the goods and/or services listed in the application at least as early as the filing date of the application.” See more information about verification.
See 15 U.S.C. §§1051(a), 1112; 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(1), 2.86(a); TMEP §§904, 1403.01, 1403.02(c).
See an overview of the requirements for a Section 1(a) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.
SPECIMEN REFUSAL
Registration is refused because the specimen does not show the applied-for mark in use in commerce in International Class 2. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a).
Specifically, the specimen on page 8 of the initial application includes a display with a sign for “Cable Coating” and what appears to be a burned cable wrap. See initial application at 8. The display does not rise to the level of a display associated with goods because it is not clear that the signage is associated directly with the goods offered for sale. See generally, TMEP §904.03(g). Further, it is unclear whether the cable coating is in fact fireproof coating as described in the identification of goods and whether the goods are in fact for sale. Additionally, the packaging for the goods, namely, the buckets on pages 9-10 and 15 and the boxes on pages 11-13 and 16-17, is unacceptable because it is unclear what is contained in the packaging. See initial application at 9-17. Specifically, the buckets cannot be accepted because the writing is not in English and thus it is unclear what is in the containers. See requirement below for translation of foreign wording on specimen. With regard to the boxes, it is unclear what goods from the identification are in the packaging.
An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark in use in commerce for each international class of goods identified in the application or amendment to allege use. 15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a).
Examples of specimens for goods include tags, labels, instruction manuals, containers, photographs that show the mark on the actual goods or packaging, and displays associated with the actual goods at their point of sale. See TMEP §§904.03 et seq. Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods. TMEP §904.03(i). However, leaflets, handbills, advertising circulars, and other advertising materials generally are not acceptable specimens for goods. See TMEP §§904.03 et seq.
Applicant may respond to this refusal by satisfying one of the following for each applicable international class:
(1) Submit a different specimen (a verified “substitute” specimen) that (a) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use and (b) shows the mark in actual use in commerce for the goods identified in the application or amendment to allege use. A “verified substitute specimen” is a specimen that is accompanied by the following statement made in a signed affidavit or supported by a declaration under 37 C.F.R. §2.20: “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce at least as early as the filing date of the application or prior to the filing of the amendment to allege use.” The substitute specimen cannot be accepted without this statement.
(2) Amend the filing basis to intent to use under Section 1(b), for which no specimen is required. This option will later necessitate additional fee(s) and filing requirements such as providing a specimen.
For an overview of both response options referenced above and instructions on how to satisfy either option online using the Trademark Electronic Application System (TEAS) form, please go to http://www.gov.uspto.report/trademarks/law/specimen.jsp.
SPECIMEN TRANSLATION
To permit proper examination, applicant must provide an English translation of all the non-English wording on the specimen. TMEP §904.06; see 37 C.F.R. §2.61(b).
ADVISORY: IMPROPER USE OF REGISTRATION NOTICE
This information is advisory only. Applicant need not respond to this issue.
ENTITY CLARIFICATION REQUIRED
Alternatively, if applicant maintains that the legal entity in the application properly identifies applicant’s entity type, applicant must provide an explanation as to why the identified entity type is more similar to a “Corporation” in this instance than to the legal entities listed in TMEP Appendix D. See id.
If, in response to the above request, applicant provides information indicating that it is not the owner of the mark, registration will be refused because the application was void as filed. See 37 C.F.R. §2.71(d); TMEP §§803.06, 1201.02(b). An application must be filed by the party who owns or is entitled to use the mark as of the application filing date. See 37 C.F.R. §2.71(d); TMEP §1201.02(b).
Response guidelines. For this application to proceed, applicant must explicitly address each refusal and/or requirement in this Office action. For a refusal, applicant may provide written arguments and evidence against the refusal, and may have other response options if specified above. For a requirement, applicant should set forth the changes or statements. Please see “Responding to Office Actions” and the informational video “Response to Office Action” for more information and tips on responding.
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
How to respond. Click to file a response to this nonfinal Office action.
/Tyler M. Seling/
Tyler M. Seling, Esq.
Examining Attorney
Law Office 112
(571) 272-0272
Tyler.Seling@uspto.gov
RESPONSE GUIDANCE