Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1957 (Rev 10/2011) |
OMB No. 0651-0050 (Exp 09/20/2020) |
Response to Office Action
The table below presents the data as entered.
Input Field
|
Entered
|
SERIAL NUMBER |
88575944 |
LAW OFFICE ASSIGNED |
LAW OFFICE 127 |
MARK SECTION |
MARK FILE NAME |
http://uspto.report/TM/88575944/mark.png |
LITERAL ELEMENT |
CPI |
STANDARD CHARACTERS |
NO |
USPTO-GENERATED IMAGE |
NO |
GOODS AND/OR SERVICES SECTION (009)(current) |
INTERNATIONAL CLASS |
009 |
DESCRIPTION |
Electronic components for the generation, amplification, transmission direction, measurement, control and reception of signals;
microwave and power grid vacuum electron devices (VEDs), klystrons, gyrotrons, traveling wave tubes, magnetrons, crossed-field amplifiers, power grid tubes, inductive output tubes and millimeter-wave
tubes; microwave tubes; solid-state power devices power amplifiers, upconverters, pulse compression assemblies, voltage controlled oscillators, high power solid-state switches, phase shifters, PIN
diode attenuators, limiters and low noise amplifiers; microwave transmitters and amplifiers; modulators; satellite communications amplifiers; receiver protectors, duplexers and control components;
medical and industrial x-ray generators; antenna systems, namely, antennas, controllers and motion control systems; composite radomes and antenna components, namely, reflectors and
sub-reflectors |
FILING BASIS |
Section 1(b) |
GOODS AND/OR SERVICES SECTION (009)(proposed) |
INTERNATIONAL CLASS |
009 |
TRACKED TEXT DESCRIPTION |
Electronic components for the generation, amplification, transmission direction, measurement, control and reception
of signals; microwave and power grid vacuum electron devices (VEDs), klystrons, gyrotrons, traveling wave tubes, magnetrons, crossed-field amplifiers, power grid tubes,
inductive output tubes and millimeter-wave tubes; microwave tubes; solid-state power devices power amplifiers, upconverters, pulse
compression assemblies, voltage controlled oscillators, high power solid-state switches, phase shifters, PIN diode attenuators, limiters and low noise amplifiers; solid-state power devices in the nature of power amplifiers, upconverters, pulse compression assemblies, voltage controlled oscillators, high power solid-state switches, phase shifters, PIN
diode attenuators, limiters and low noise amplifiers; microwave transmitters and amplifiers; modulators; pulse modulators; satellite communications amplifiers; receiver protectors, duplexers and control components;
radar receiver protectors, duplexers and control components namely high-power switches, attenuators, phase shifters and integrated microwave assemblies;
medical and industrial x-ray generators; industrial x-ray generators; antenna systems,
namely, antennas, controllers and motion control systems; antenna systems, comprised of antennas, controllers to manage the operation of the antenna and motion
control systems to ensure that the antenna remains accurately pointed; composite radomes and antenna components, namely, reflectors and sub-reflectors;
composite radomes for use as enclosures for protecting antennas, and antenna components, namely, reflectors and sub-reflectors |
FINAL DESCRIPTION |
Electronic components for the generation, amplification, transmission direction, measurement, control and reception of signals;
microwave and power grid vacuum electron devices (VEDs), klystrons, gyrotrons, traveling wave tubes, magnetrons, crossed-field amplifiers, power grid tubes, inductive output tubes and millimeter-wave
tubes; microwave tubes; solid-state power devices in the nature of power amplifiers, upconverters, pulse compression assemblies, voltage controlled oscillators, high power solid-state switches, phase
shifters, PIN diode attenuators, limiters and low noise amplifiers; microwave transmitters and amplifiers; pulse modulators; satellite communications amplifiers; radar receiver protectors, duplexers
and control components namely high-power switches, attenuators, phase shifters and integrated microwave assemblies; industrial x-ray generators; antenna systems, comprised of antennas, controllers to
manage the operation of the antenna and motion control systems to ensure that the antenna remains accurately pointed; composite radomes for use as enclosures for protecting antennas, and antenna
components, namely, reflectors and sub-reflectors |
FILING BASIS |
Section 1(b) |
GOODS AND/OR SERVICES SECTION (010)(class added) |
INTERNATIONAL CLASS |
010 |
DESCRIPTION |
Medical x-ray generators for diagnostic imaging |
FILING BASIS |
Section 1(b) |
PAYMENT SECTION |
NUMBER OF CLASSES |
1 |
APPLICATION FOR REGISTRATION PER CLASS |
275 |
TOTAL FEES DUE |
275 |
SIGNATURE SECTION |
ORIGINAL PDF FILE |
HS_63147345-213921928_._CPI_-_944_.pdf |
CONVERTED PDF FILE(S)
(2 pages) |
\\TICRS\EXPORT17\IMAGEOUT17\885\759\88575944\xml4\ROA0002.JPG |
|
\\TICRS\EXPORT17\IMAGEOUT17\885\759\88575944\xml4\ROA0003.JPG |
SIGNATORY'S NAME |
Bob Fickett |
SIGNATORY'S POSITION |
President and CEO |
RESPONSE SIGNATURE |
/Jane Shay Wald/ |
SIGNATORY'S NAME |
Jane Shay Wald |
SIGNATORY'S POSITION |
Attorney of record |
SIGNATORY'S PHONE NUMBER |
(310) 277-1010 |
DATE SIGNED |
01/28/2020 |
AUTHORIZED SIGNATORY |
YES |
FILING INFORMATION SECTION |
SUBMIT DATE |
Tue Jan 28 21:46:26 EST 2020 |
TEAS STAMP |
USPTO/ROA-XX.XXX.XX.X-202
00128214626139079-8857594
4-700eb7c1d158214a0cab330
332c9f7ca4e52396642969ab4
555a70e8926f1cfa-DA-46258
610-20200128213921928509 |
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1957 (Rev 10/2011) |
OMB No. 0651-0050 (Exp 09/20/2020) |
Response to Office Action
To the Commissioner for Trademarks:
Application serial no.
88575944 CPI (Stylized and/or with Design, see http://uspto.report/TM/88575944/mark.png) has been amended as follows:
CLASSIFICATION AND LISTING OF GOODS/SERVICES
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 009 for Electronic components for the generation, amplification, transmission direction, measurement, control and reception of signals; microwave and power grid vacuum electron
devices (VEDs), klystrons, gyrotrons, traveling wave tubes, magnetrons, crossed-field amplifiers, power grid tubes, inductive output tubes and millimeter-wave tubes; microwave tubes; solid-state
power devices power amplifiers, upconverters, pulse compression assemblies, voltage controlled oscillators, high power solid-state switches, phase shifters, PIN diode attenuators, limiters and low
noise amplifiers; microwave transmitters and amplifiers; modulators; satellite communications amplifiers; receiver protectors, duplexers and control components; medical and industrial x-ray
generators; antenna systems, namely, antennas, controllers and motion control systems; composite radomes and antenna components, namely, reflectors and sub-reflectors
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Proposed:
Tracked Text Description: Electronic components for the generation, amplification, transmission direction, measurement, control and reception of signals;
microwave and power grid vacuum electron devices (VEDs), klystrons, gyrotrons, traveling wave tubes, magnetrons, crossed-field amplifiers, power grid tubes, inductive output tubes and
millimeter-wave tubes;
microwave tubes;
solid-state power devices power amplifiers, upconverters, pulse compression assemblies,
voltage controlled oscillators, high power solid-state switches, phase shifters, PIN diode attenuators, limiters and low noise amplifiers;
solid-state power
devices in the nature of power amplifiers, upconverters, pulse compression assemblies, voltage controlled oscillators, high power solid-state switches, phase shifters, PIN diode attenuators, limiters
and low noise amplifiers;
microwave transmitters and amplifiers;
modulators;
pulse
modulators;
satellite communications amplifiers;
receiver protectors, duplexers and control components;
radar receiver protectors, duplexers and control components namely high-power switches, attenuators, phase shifters and integrated microwave assemblies;
medical and industrial x-ray generators;
industrial x-ray generators;
antenna systems, namely, antennas,
controllers and motion control systems;
antenna systems, comprised of antennas, controllers to manage the operation of the antenna and motion control systems to
ensure that the antenna remains accurately pointed;
composite radomes and antenna components, namely, reflectors and sub-reflectors;
composite radomes for use as enclosures for protecting antennas, and antenna components, namely, reflectors and sub-reflectorsClass 009 for Electronic components for the
generation, amplification, transmission direction, measurement, control and reception of signals; microwave and power grid vacuum electron devices (VEDs), klystrons, gyrotrons, traveling wave tubes,
magnetrons, crossed-field amplifiers, power grid tubes, inductive output tubes and millimeter-wave tubes; microwave tubes; solid-state power devices in the nature of power amplifiers, upconverters,
pulse compression assemblies, voltage controlled oscillators, high power solid-state switches, phase shifters, PIN diode attenuators, limiters and low noise amplifiers; microwave transmitters and
amplifiers; pulse modulators; satellite communications amplifiers; radar receiver protectors, duplexers and control components namely high-power switches, attenuators, phase shifters and integrated
microwave assemblies; industrial x-ray generators; antenna systems, comprised of antennas, controllers to manage the operation of the antenna and motion control systems to ensure that the antenna
remains accurately pointed; composite radomes for use as enclosures for protecting antennas, and antenna components, namely, reflectors and sub-reflectors
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Applicant hereby adds the following class of goods/services to the application:
New: Class 010 for Medical x-ray generators for diagnostic imaging
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
FEE(S)
Fee(s) in the amount of $275 is being submitted.
SIGNATURE(S)
Declaration Signature
Original PDF file:
HS_63147345-213921928_._CPI_-_944_.pdf
Converted PDF file(s) (2 pages)
Signature File1
Signature File2
Signatory's Name: Bob Fickett
Signatory's Position: President and CEO
Response Signature
Signature: /Jane Shay Wald/ Date: 01/28/2020
Signatory's Name: Jane Shay Wald
Signatory's Position: Attorney of record
Signatory's Phone Number: (310) 277-1010
The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and
any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another
U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed
revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter;
or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.
RAM Sale Number: 88575944
RAM Accounting Date: 01/28/2020
Serial Number: 88575944
Internet Transmission Date: Tue Jan 28 21:46:26 EST 2020
TEAS Stamp: USPTO/ROA-XX.XXX.XX.X-202001282146261390
79-88575944-700eb7c1d158214a0cab330332c9
f7ca4e52396642969ab4555a70e8926f1cfa-DA-
46258610-20200128213921928509