Offc Action Outgoing

United States Patent and Trademark Office (USPTO)

Office Action (Official Letter) About Applicant’s Trademark Application

 

 

 

NONFINAL OFFICE ACTION

 

The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned.  Respond using the Trademark Electronic Application System (TEAS).  A link to the appropriate TEAS response form appears at the end of this Office action. 

 

 

Issue date:  October 29, 2019

 

The assigned examining attorney has reviewed the referenced application and determined the following.

 

Search Statement

 

The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d).  TMEP §704.02; see 15 U.S.C. §1052(d).

 

Configuration Refusal

 

Registration is refused because the applied-for mark, which consists of a three-dimensional configuration of the goods, appears to be a functional design for such goods.  Trademark Act Section 2(e)(5), 15 U.S.C. §1052(e)(5); see TMEP §1202.02(a)-(a)(ii).  A feature is functional if it is “‘essential to the use or purpose of the [product]’” or “‘it affects the cost or quality of the [product].’”  TrafFix Devices, Inc. v. Mktg. Displays, Inc., 532 U.S. 23, 33, 58 USPQ2d 1001, 1006 (2001) (quoting Qualitex Co. v. Jacobson Prods. Co., 514 U.S. 159, 165, 34 USPQ2d 1161, 1163-64 (1995)); Inwood Labs., Inc., v. Ives Labs., Inc., 456 U.S. 844, 850 n.10, 214 USPQ 1, 4 n.10 (1982); TMEP §1202.02(a)(iii)(A).

 

A mark that consists of a three-dimensional configuration of a product or its packaging is functional, and thus unregistrable, when the evidence shows that the design provides identifiable utilitarian advantages to the user; i.e., the product or container “has a particular shape because it works better in [that] shape.”  Valu Eng’g, Inc. v. Rexnord Corp., 278 F.3d 1268, 1274, 61 USPQ2d 1422, 1425 (Fed. Cir. 2002) (internal punctuation and citation omitted); see TMEP §1202.02(a)(iii)(A).

 

The evidence need not establish that the configuration at issue is the very best design for the particular product or product packaging.  A configuration can be held functional when the evidence shows that it provides a specific utilitarian advantage that makes it one of a few superior designs available.  See In re Bose Corp., 772 F.2d 866, 227 USPQ 1 (Fed. Cir. 1985) (holding shape of a loudspeaker system enclosure functional because it conforms to the shape of the sound matrix and is thereby an efficient and superior design); In re Dietrich, 91 USPQ2d 1622 (TTAB 2009) (holding particular spoke arrangement of a bicycle wheel functional because it is more stable and provides better performance than wheels with other spoke arrangements featuring the same or greater number of spokes); In re Am. Nat’l Can Co., 41 USPQ2d 1841 (TTAB 1997) (holding metal beverage containers with vertical fluting functional because vertical fluting is one of a limited number of ways to strengthen can sidewalls and it allows for an easier way to grip and hold the can); TMEP §1202.02(a)(v), (a)(v)(C).

 

On the other hand, where the evidence shows that the specific product or container configuration at issue provides no real utilitarian advantages to the user, but is one of many equally feasible, efficient and competitive designs, then it may be registrable.  See In re Morton-Norwich Prods., Inc., 671 F.2d 1332, 213 USPQ 9 (C.C.P.A. 1982).  However, a product configuration cannot be registered on the Principal Register without a showing of acquired distinctiveness.  See Wal-Mart Stores, Inc. v. Samara Bros., Inc., 529 U.S. 205, 54 USPQ2d 1065 (2000); TMEP §1202.02(b)-(b)(i).

 

Applicant must provide the following information and documentation regarding the applied-for three-dimensional configuration mark:

 

(1)        A written statement as to whether the applied-for mark, or any feature(s) thereof, is or has been the subject of a design or utility patent or patent application, including expired patents and abandoned patent applications.  Applicant must also provide copies of the patent and/or patent application documentation.

 

(2)        Advertising, promotional, and/or explanatory materials concerning the applied-for configuration mark, particularly materials specifically related to the design feature(s) embodied in the applied-for mark.

 

(3)        A written explanation and any evidence as to whether there are alternative designs available for the feature(s) embodied in the applied-for mark, and whether such alternative designs are equally efficient and/or competitive.  Applicant must also provide a written explanation and any documentation concerning similar designs used by competitors.

 

(4)        A written statement as to whether the product design or packaging design at issue results from a comparatively simple or inexpensive method of manufacture in relation to alternative designs for the product/container.  Applicant must also provide information regarding the method and/or cost of manufacture relating to applicant’s goods.

 

(5)        Any other evidence that applicant considers relevant to the registrability of the applied-for configuration mark.

 

See 37 C.F.R. §2.61(b); In re Morton-Norwich Prods., Inc., 671 F.2d 1332, 1340-41, 213 USPQ 9, 15-16 (C.C.P.A. 1982); TMEP §§1202.02(a)(v) et seq.

 

Any document filed with the USPTO becomes part of the official public application record and will not be returned or removed.  TMEP §§404, 814.  If any of the information requested above is confidential or applicant does not want such information to become part of the public record for a valid reason, applicant should submit an explanation of those circumstances or redact confidential portions prior to submission.  See TMEP §814.  Applicants are not required to submit confidential information into the record; a written explanation or summary of that information may suffice.  Id.

 

Regarding the requirement for this information, the Trademark Trial and Appeal Board and its appeals court have recognized that the necessary technical information for ex parte determinations as to functionality is usually more readily available to an applicant, and thus an applicant is normally the source of most of the evidence in these cases.  In re Teledyne Indus. Inc., 696 F.2d 968, 971, 217 USPQ 9, 11 (Fed. Cir. 1982); see In re Babies Beat Inc., 13 USPQ2d 1729, 1731 (TTAB 1990) (holding registration was properly refused where applicant failed to comply with trademark examining attorney’s request for copies of patent applications and other patent information); TMEP §1202.02(a)(v).

 

Failure to comply with a request for information can be grounds for refusing registration.  In re AOP LLC, 107 USPQ2d 1644, 1651 (TTAB 2013); In re DTI P’ship LLP, 67 USPQ2d 1699, 1701-02 (TTAB 2003); TMEP §814.

 

Nondistinctive Product Design Refusal

 

Registration is refused because the applied-for mark consists of a nondistinctive product design or nondistinctive features of a product design that is not registrable on the Principal Register without sufficient proof of acquired distinctiveness.  Trademark Act Sections 1, 2, and 45, 15 U.S.C. §§1051-1052, 1127; Wal-Mart Stores, Inc. v. Samara Bros., Inc., 529 U.S. 205, 210, 213-14, 54 USPQ2d 1065, 1068-69 (2000); In re Slokevage, 441 F.3d 957, 961, 78 USPQ2d 1395, 1398 (Fed. Cir. 2006); see TMEP §1202.02(b)(i).

 

A product design can never be inherently distinctive as a matter of law; consumers are aware that such designs are intended to render the goods more useful or appealing rather than identify their source.  See Wal-Mart Stores, Inc. v. Samara Bros., 529 U.S. at 212-13, 54 USPQ2d at 1068-69; In re Slokevage, 441 F.3d at 962, 78 USPQ2d at 1399.  Thus, consumer predisposition to equate a product design with its source does not exist.  Wal-Mart Stores, Inc. v. Samara Bros., 529 U.S. at 213, 54 USPQ2d at 1069.

 

In response to this refusal, applicant may assert a claim that the applied-for mark has acquired distinctiveness under Trademark Act Section 2(f).  To support this claim of acquired distinctiveness, applicant may submit evidence of “advertising expenditures, sales success, length and exclusivity of use, unsolicited media coverage, and consumer studies (linking the name to a source).”  In re Change Wind Corp., 123 USPQ2d 1453, 1467 (TTAB 2017) (quoting In re Steelbuilding.com, 415 F.3d 1293, 1300, 75 USPQ2d 1420, 1424 (Fed. Cir. 2005)).  A showing of acquired distinctiveness need not consider all of these types of evidence; no single factor is determinative.  In re Steelbuilding.com, 415 F.3d at 1300, 75 USPQ2d at 1424; see TMEP §§1212.06 et seq.  However, “[t]he evidence must relate to the promotion and recognition of the specific configuration embodied in the applied-for mark and not to the goods in general.”  In re Change Wind Corp., 123 USPQ2d at 1467 (citing Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 851 n.11, 214 USPQ 1, 4 n.11 (1982)). 

 

To establish acquired distinctiveness, an applicant may rely only on use in commerce that may be regulated by the U.S. Congress.  See 15 U.S.C. §§1052(f), 1127.  Use solely in a foreign country or between two foreign countries is not evidence of acquired distinctiveness in the United States.  TMEP §§1010, 1212.08; see In re Rogers, 53 USPQ2d 1741, 1746-47 (TTAB 1999).

 

As an alternative to submitting evidence of acquired distinctiveness, applicant may amend the application to the Supplemental Register.  Trademark Act Section 23, 15 U.S.C. §1091; see 37 C.F.R. §§2.47, 2.75(a); TMEP §§816, 1202.02(b)(i).

 

Drawing/Description of the Mark

 

For marks consisting of a configuration of the goods or their packaging or a specific design feature of the goods or packaging, the drawing must depict a single three-dimensional view of the goods or packaging, showing in solid lines those features that applicant claims as its mark.  See 37 C.F.R. §2.52(b)(2); TMEP §§807.10, 1202.02(c)(iv); In re Minn. Mining & Mfg. Co., 335 F.2d 836, 839, 142 USPQ 366, 368-69 (C.C.P.A. 1964).  If the mark cannot be adequately depicted in a single rendition, applicant must file a petition to the Director requesting that the requirement to provide a single rendition of the mark be waived.  TMEP §807.10.

 

If the drawing of the mark includes additional matter not claimed as part of the mark (e.g., matter that shows the position or placement of the mark), applicant must depict such matter using broken or dotted lines.  37 C.F.R. §2.52(b)(4); Kohler Co. v. Honda Giken Kogyo K.K., 125 USPQ2d 1468, 1488 (TTAB 2017) (quoting In re Heatcon, Inc., 116 USPQ2d 1366, 1379 (TTAB 2015)); TMEP §§807.08, 1202.02(c)(i); see In re Water Gremlin Co., 605 F.2d 841, 844, 208 USPQ 89, 91 (C.C.P.A. 1980).

 

In addition to these drawing requirements, applicant must also submit a clear and concise description of the mark that does the following:

 

(1)        Indicates the mark is a three-dimensional configuration of the goods or their packaging or of a specific design feature of the goods or packaging.

 

(2)        Specifies all the elements in the drawing that constitute the mark and are claimed as part of the mark.

 

(3)        Specifies any elements that are not part of the mark and indicates that the matter shown in broken or dotted lines is not part of the mark and serves only to show the position or placement of the mark.  Please note that the hanger portion at the top of the proposed mark is clearly functional and must be dotted and omitted from the proposed mark.

 

See 37 C.F.R. §§2.37, 2.52(b)(2), (b)(4); In re Famous Foods, Inc., 217 USPQ 177, 177 (TTAB 1983); TMEP §§807.08, 807.10, 1202.02(c)(ii). 

 

 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

How to respond.  Click to file a response to this nonfinal Office action  

 

If the applicant has any questions, please contact the undersigned.

 

 

/Janice L. McMorrow/

Janice L. McMorrow

Trademark Examining Attorney

Law Office 115

571-272-9194

janice.mcmorrow@uspto.gov (informal)

 

 

RESPONSE GUIDANCE

• Missing the response deadline to this letter will cause the application to abandon.  A response or notice of appeal must be received by the USPTO before midnight Eastern Time of the last day of the response period.  TEAS and ESTTA maintenance or unforeseen circumstances could affect an applicant’s ability to timely respond.  

 

• Responses signed by an unauthorized party are not accepted and can cause the application to abandon.  If applicant does not have an attorney, the response must be signed by the individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant.  If applicant has an attorney, the response must be signed by the attorney.

 

• If needed, find contact information for the supervisor of the office or unit listed in the signature block.

 

United States Patent and Trademark Office (USPTO)

 

USPTO OFFICIAL NOTICE

 

Office Action (Official Letter) has issued

on October 29, 2019 for

U.S. Trademark Application Serial No. 88560346

 

Your trademark application has been reviewed by a trademark examining attorney.  As part of that review, the assigned attorney has issued an official letter that you must respond to by the specified deadline or your application will be abandoned.  Please follow the steps below.

 

(1)  Read the official letter.

 

(2)  Direct questions about the contents of the Office action to the assigned attorney below. 

 

 

/Janice L. McMorrow/

Janice L. McMorrow

Trademark Examining Attorney

Law Office 115

571-272-9194

janice.mcmorrow@uspto.gov (informal)

 

Direct questions about navigating USPTO electronic forms, the USPTO website, the application process, the status of your application, and/or whether there are outstanding deadlines or documents related to your file to the Trademark Assistance Center (TAC).

 

(3)  Respond within 6 months (or earlier, if required in the Office action) from October 29, 2019, using the Trademark Electronic Application System (TEAS).  The response must be received by the USPTO before midnight Eastern Time of the last day of the response period.  See the Office action for more information about how to respond.

 

 

 

GENERAL GUIDANCE

·         Check the status of your application periodically in the Trademark Status & Document Retrieval (TSDR) database to avoid missing critical deadlines.

 

·         Update your correspondence email address, if needed, to ensure you receive important USPTO notices about your application.

 

·         Beware of misleading notices sent by private companies about your application.  Private companies not associated with the USPTO use public information available in trademark registrations to mail and email trademark-related offers and notices – most of which require fees.  All official USPTO correspondence will only be emailed from the domain “@uspto.gov.”