Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88500413 CLAD THE WORLD(Standard Characters, see http://uspto.report/TM/88500413/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES
Applicant proposes to amend the following:
Current: Class 006 for Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal slide fasteners, snap fasteners, stud fasteners, and threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems comprising panels,metal panels, composite panels, extruded products, aluminum extrusions, extruded nylon, and pulltruded fiberglass
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal slide fasteners, snap fasteners, stud fasteners, and threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems comprising panels,metal panels, composite panels, extruded products, aluminum extrusions, extruded nylon, and pulltruded fiberglass; Metal suction cupsClass 006 for Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal slide fasteners, snap fasteners, stud fasteners, and threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems comprising panels,metal panels, composite panels, extruded products, aluminum extrusions, extruded nylon, and pulltruded fiberglass; Metal suction cups
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate, before the application may proceed to registration. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following:
Current: Class 007 for Metalworking machine tools; power tools, namely, drills, impact wrench, saws, circular saws, jigsaws, hole saws, handheld saws, table saws, miter saws, router tables, router, and router blades
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Metalworking machine tools; Metalworking machines; power tools, namely, drills, impact wrench, saws, circular saws, jigsaws, hole saws, handheld saws, table saws, miter saws, router tables, router, and router blades; power tools, namely, drills, impact wrenches, circular saws, jigsaws, hole saws, table saws, router tables, and routers; machine parts, namely, router bladesClass 007 for Metalworking machines; power tools, namely, drills, impact wrenches, circular saws, jigsaws, hole saws, table saws, router tables, and routers; machine parts, namely, router blades
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate, before the application may proceed to registration. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following:
Current: Class 008 for Hand tools, namely, drills, impact wrench, saws, circular saws, jigsaws, hole saws, handheld saws, table saws, miter saws, router tables, router, router blades, saw blades, fasteners, SLED's (snap lock engagement device - tools designed specifically for the installation of proprietary cladding systems, install aids (temporary clips), suction cups, adhesive tape, hammers, mallets, rubber mallets
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Hand tools, namely, drills, impact wrench, saws, circular saws, jigsaws, hole saws, handheld saws, table saws, miter saws, router tables, router, router blades, saw blades, fasteners, SLED's (snap lock engagement device - tools designed specifically for the installation of proprietary cladding systems, install aids (temporary clips), suction cups, adhesive tape, hammers, mallets, rubber mallets; Hand tools, namely, hammers, mallets, hand operated drills, hand saws, hand operated jigsaws, handheld saws, miter saws, blades for hand saws; hand tools, namely, hand tools designed specifically for the installation of proprietary cladding systemsClass 008 for Hand tools, namely, hammers, mallets, hand operated drills, hand saws, hand operated jigsaws, handheld saws, miter saws, blades for hand saws; hand tools, namely, hand tools designed specifically for the installation of proprietary cladding systems
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate, before the application may proceed to registration. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following:
Current: Class 016 for Architectural blueprints; architectural models; printed installation manuals and brochures about building products, cladding systems, jobsite signage, specifications, LEED, warranty, CAD details, drawing details, building plans, estimates, sales orders; printed paper signs
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Architectural blueprints; architectural models; printed installation manuals and brochures about building products, cladding systems, jobsite signage, specifications, LEED, warranty, CAD details, drawing details, building plans, estimates, sales orders; printed paper signs; Adhesive tapes for stationery or household purposesClass 016 for Architectural blueprints; architectural models; printed installation manuals and brochures about building products, cladding systems, jobsite signage, specifications, LEED, warranty, CAD details, drawing details, building plans, estimates, sales orders; printed paper signs;Adhesive tapes for stationery or household purposes
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate, before the application may proceed to registration. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following:
Current: Class 017 for Plastic sheeting used in the construction industry as a vapor barrier
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Plastic sheeting used in the construction industry as a vapor barrier; Adhesive tapes, other than stationery and not for medical or household purposesClass 017 for Plastic sheeting used in the construction industry as a vapor barrier; Adhesive tapes, other than stationery and not for medical or household purposes
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947,479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate, before the application may proceed to registration. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant hereby adds the following class of goods/services to the application:
New: Class 020 for Plastic suction cups
Filing Basis: Section 44(e),Based on Foreign Registration: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods and /or services, and submits a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. 15 U.S.C. Section 1126(e), as amended.
Original PDF file:
FRN0-881731249-112706573_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

OWNER AND/OR ENTITY INFORMATION
Applicant proposes to amend the following:
Current: Anenda Systems Inc., a corporation of Canada, having an address of
      1278 Cliveden Ave.
      Delta, V3M6G4
      Canada
      +1-
Proposed: Anenda Systems Inc., a corporation of Canada, having an address of
      1278 Cliveden Ave.
      Delta, V3M6G4
      Canada
      Email Address: daniel.meier@al13.com
      
Correspondence Information (current):
      Michael G. Atkins
      PRIMARY EMAIL FOR CORRESPONDENCE: mike@atkinsip.com
      SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED
Correspondence Information (proposed):
      Michael G. Atkins
      PRIMARY EMAIL FOR CORRESPONDENCE: mike@atkinsip.com
      SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED

Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the owner/holder and the owner's/holder's attorney, if appointed, and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).

FEE(S)
Fee(s) in the amount of $275 is being submitted.

SIGNATURE(S)
Declaration Signature

DECLARATION: The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that, if the applicant submitted the application or allegation of use (AOU) unsigned, all statements in the application or AOU and this submission based on the signatory's own knowledge are true, and all statements in the application or AOU and this submission made on information and belief are believed to be true.

STATEMENTS FOR UNSIGNED SECTION 1(a) APPLICATION/AOU: If the applicant filed an unsigned application under 15 U.S.C. §1051(a) or AOU under 15 U.S.C. §1051(c), the signatory additionally believes that: the applicant is the owner of the mark sought to be registered; the mark is in use in commerce and was in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; the original specimen(s), if applicable, shows the mark in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; for a collective trademark, collective service mark, collective membership mark application, or certification mark application, the applicant is exercising legitimate control over the use of the mark in commerce and was exercising legitimate control over the use of the mark in commerce as of the filing date of the application or AOU; for a certification mark application, the applicant is not engaged in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

STATEMENTS FOR UNSIGNED SECTION 1(b)/SECTION 44 APPLICATION AND FOR SECTION 66(a) COLLECTIVE/CERTIFICATION MARK APPLICATION: If the applicant filed an unsigned application under 15 U.S.C. §§ 1051(b), 1126(d), and/or 1126(e), or filed a collective/certification mark application under 15 U.S.C. §1141f(a), the signatory additionally believes that: for a trademark or service mark application, the applicant is entitled to use the mark in commerce on or in connection with the goods/services specified in the application; the applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date; for a collective trademark, collective service mark, collective membership mark, or certification mark application, the applicant has a bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce and had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce as of the application filing date; the signatory is properly authorized to execute the declaration on behalf of the applicant; for a certification mark application, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

Signature: /Michael G. Atkins/      Date: 02/28/2020
Signatory's Name: Michael G. Atkins
Signatory's Position: Attorney of record, Washington bar member
Signatory's Phone Number: 206-628-0983


Response Signature
Signature: /Michael G. Atkins/     Date: 02/28/2020
Signatory's Name: Michael G. Atkins
Signatory's Position: Attorney of record, Washington bar member

Signatory's Phone Number: 206-628-0983

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

Mailing Address:    Michael G. Atkins
   Atkins Intellectual Property, PLLC
   
   113 Cherry Street #18483
   Seattle, Washington 98104-2205
Mailing Address:    Michael G. Atkins
   Atkins Intellectual Property, PLLC
   113 Cherry Street #18483
   Seattle, Washington 98104-2205
        
RAM Sale Number: 88500413
RAM Accounting Date: 02/28/2020
        
Serial Number: 88500413
Internet Transmission Date: Fri Feb 28 11:40:56 ET 2020
TEAS Stamp: USPTO/ROA-XX.XX.XX.XXX-20200228114056494
577-88500413-710d7d1cb3cb212ac62cf99fc26
1fcf41a36dfac9efcbf44bb3eb5819e2fe18d777
-CC-40540601-20200228112706573446