Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88500413 CLAD THE WORLD(Standard Characters, see http://uspto.report/TM/88500413/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 006 for Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal slide fasteners, snap fasteners, stud fasteners, and threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal slide fasteners, snap fasteners, stud fasteners, and threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems; metal rainscreen cladding and construction facade rainscreen systems Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems comprising panels,metal panels, composite panels, extruded products, aluminum extrusions, extruded nylon, and pulltruded fiberglassClass 006 for Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal slide fasteners, snap fasteners, stud fasteners, and threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems Metal cladding for construction and building; metal building construction hardware, namely, nuts and bolts, screws, nails, springs, hinges, latches, flanges, eave struts, base angles, corner angles, rake channels, subgirts, and sag rods; metal threaded fasteners; building flashing, namely, metal building flashing; metal girts and sheeting rails; metal rainscreen cladding and construction facade rainscreen systems comprising panels,metal panels, composite panels, extruded products, aluminum extrusions, extruded nylon, and pulltruded fiberglass
The applicant, or the applicant's related company or licensee, is using the mark in commerce on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended, but has not provided the dates of use by the applicant, or the applicant's related company, licensee, or predecessor in interest, of the mark on or in connection with the identified goods and/or services.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU0-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 007 for Machine tools for the metalworking industry; power tools
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Machine tools for the metalworking industry; Metalworking machine tools; power tools; power tools, namely, drills, impact wrench, saws, circular saws, jigsaws, hole saws, handheld saws, table saws, miter saws, router tables, router, and router bladesClass 007 for Metalworking machine tools; power tools, namely, drills, impact wrench, saws, circular saws, jigsaws, hole saws, handheld saws, table saws, miter saws, router tables, router, and router blades
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU1-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 008 for Hand tools
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Hand tools; Hand tools, namely, drills, impact wrench, saws, circular saws, jigsaws, hole saws, handheld saws, table saws, miter saws, router tables, router, router blades, saw blades, fasteners, SLED's (snap lock engagement device - tools designed specifically for the installation of proprietary cladding systems, install aids (temporary clips), suction cups, adhesive tape, hammers, mallets, rubber malletsClass 008 for Hand tools, namely, drills, impact wrench, saws, circular saws, jigsaws, hole saws, handheld saws, table saws, miter saws, router tables, router, router blades, saw blades, fasteners, SLED's (snap lock engagement device - tools designed specifically for the installation of proprietary cladding systems, install aids (temporary clips), suction cups, adhesive tape, hammers, mallets, rubber mallets
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU2-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 009 for Electronic publications, namely, installation manuals and brochures; software applications for allowing users to download information on architectural moulding and panelling, and to design architectural moulding and panelling projects
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Electronic publications, namely, installation manuals and brochures; Electronic publications, namely, installation manuals and brochures featuring specifications, data sheets, install guidelines, CAD details, drawing details, estimates, sales orders, install videos, illustrative brochures, install galleries/images, environmental information, LEED sheets, order standard guidelines, parts lists, color guides, color samples, testing standards, and warranty; software applications for allowing users to download information on architectural moulding and panelling, and to design architectural moulding and panelling projects; downloadable computer software applications for allowing users to download information on architectural moulding and panelling, and to design architectural moulding and panelling projectsClass 009 for Electronic publications, namely, installation manuals and brochures featuring specifications, data sheets, install guidelines, CAD details, drawing details, estimates, sales orders, install videos, illustrative brochures, install galleries/images, environmental information, LEED sheets, order standard guidelines, parts lists, color guides, color samples, testing standards, and warranty; downloadable computer software applications for allowing users to download information on architectural moulding and panelling, and to design architectural moulding and panelling projects
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU3-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 016 for Architectural blueprints; architectural models; installation manuals and brochures; signs
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Architectural blueprints; architectural models; installation manuals and brochures; printed installation manuals and brochures about building products, cladding systems, jobsite signage, specifications, LEED, warranty, CAD details, drawing details, building plans, estimates, sales orders; signs; printed paper signsClass 016 for Architectural blueprints; architectural models; printed installation manuals and brochures about building products, cladding systems, jobsite signage, specifications, LEED, warranty, CAD details, drawing details, building plans, estimates, sales orders; printed paper signs
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU4-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 019 for Wood cladding for construction and building; non-metal architectural moulding and architectural panels, namely, structural insulated panels, column covers, fascias, soffits, parapet caps, spandrels, canopies, interior wall panelling, exterior wall panelling, ceiling panels, glass panels, roofing panels, wood panels, wall tiles; non-metal wallboard; pre-fabricated interior and exterior wall assembly kits; building flashing, namely, plastic sheet vapor barriers
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Wood cladding for construction and building; non-metal architectural moulding and architectural panels, namely, structural insulated panels, column covers, fascias, soffits, parapet caps, spandrels, canopies, interior wall panelling, exterior wall panelling, ceiling panels, glass panels, roofing panels, wood panels, wall tiles; non-metal wallboard; pre-fabricated interior and exterior wall assembly kits; pre-fabricated interior and exterior wall assembly kits comprised of panels, frame components, extruded products, extruded aluminum, plastic profiles, composite profiles; building flashing, namely, plastic sheet vapor barriersClass 019 for Wood cladding for construction and building; non-metal architectural moulding and architectural panels, namely, structural insulated panels, column covers, fascias, soffits, parapet caps, spandrels, canopies, interior wall panelling, exterior wall panelling, ceiling panels, glass panels, roofing panels, wood panels, wall tiles; non-metal wallboard; pre-fabricated interior and exterior wall assembly kits comprised of panels, frame components, extruded products, extruded aluminum, plastic profiles, composite profiles
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU5-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 037 for Building construction
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed: Class 037 for Building construction
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU6-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 040 for Custom design and manufacture of metal and wood cladding and rainscreen cladding; interior and exterior wall fabrication and finishing services
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed: Class 040 for Custom design and manufacture of metal and wood cladding and rainscreen cladding; interior and exterior wall fabrication and finishing services
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU7-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 042 for Architectural services; product design consulting services
Original Filing Basis:
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.

Proposed: Class 042 for Architectural services; product design consulting services
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU8-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant hereby adds the following class of goods/services to the application:
New: Class 026 for Metal slide fasteners, snap fasteners, stud fasteners
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(e),Based on Foreign Registration: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods and /or services, and submits a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. 15 U.S.C. Section 1126(e), as amended.
Original PDF file:
FRN0-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

Applicant hereby adds the following class of goods/services to the application:
New: Class 017 for Plastic sheeting used in the construction industry as a vapor barrier
Filing Basis: Section 44(e),Based on Foreign Registration: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods and /or services, and submits a copy of [ Canada registration number TMA947479 registered 08/25/2016 with a renewal date of __________ and an expiration date of 08/25/2031 ], and translation thereof, if appropriate. 15 U.S.C. Section 1126(e), as amended.
Original PDF file:
FRN1-88259383-080718688_._TMA947479_CLAD_THE_WORLD.PDF
Converted PDF file(s) ( 3 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3

The foreign registration that is the basis of the U.S. application under §44(e) of the Trademark Act (15 U.S.C. §1126(e)) includes a claim of standard characters or the country of origin's standard character equivalent.

The applicant's current attorney information: Michael G. Atkins. Michael G. Atkins of Atkins Intellectual Property, PLLC, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, is located at

      113 Cherry Street #18483
      Seattle, Washington 98104-2205
      US

The phone number is 206-628-0983.

The email address is mike@atkinsip.com

The applicants proposed attorney information: Michael G. Atkins. Michael G. Atkins of Atkins Intellectual Property, PLLC, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, is located at

      113 Cherry Street #18483
      Seattle, Washington 98104-2205
      United States

The phone number is 206-628-0983.

The email address is mike@atkinsip.com

Michael G. Atkins submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.
The applicant's current correspondence information: Michael G. Atkins. Michael G. Atkins of Atkins Intellectual Property, PLLC, is located at

      113 Cherry Street #18483
      Seattle, Washington 98104-2205
      US

The phone number is 206-628-0983.

The email address is mike@atkinsip.com

The applicants proposed correspondence information: Michael G. Atkins. Michael G. Atkins of Atkins Intellectual Property, PLLC, is located at

      113 Cherry Street #18483
      Seattle, Washington 98104-2205
      United States

The phone number is 206-628-0983.

The email address is mike@atkinsip.com

FEE(S)
Fee(s) in the amount of $550 is being submitted.

SIGNATURE(S)
Declaration Signature

DECLARATION: The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that, if the applicant submitted the application or allegation of use (AOU) unsigned, all statements in the application or AOU and this submission based on the signatory's own knowledge are true, and all statements in the application or AOU and this submission made on information and belief are believed to be true.

STATEMENTS FOR UNSIGNED SECTION 1(a) APPLICATION/AOU: If the applicant filed an unsigned application under 15 U.S.C. §1051(a) or AOU under 15 U.S.C. §1051(c), the signatory additionally believes that: the applicant is the owner of the mark sought to be registered; the mark is in use in commerce and was in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; the original specimen(s), if applicable, shows the mark in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; for a collective trademark, collective service mark, collective membership mark application, or certification mark application, the applicant is exercising legitimate control over the use of the mark in commerce and was exercising legitimate control over the use of the mark in commerce as of the filing date of the application or AOU; for a certification mark application, the applicant is not engaged in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

STATEMENTS FOR UNSIGNED SECTION 1(b)/SECTION 44 APPLICATION AND FOR SECTION 66(a) COLLECTIVE/CERTIFICATION MARK APPLICATION: If the applicant filed an unsigned application under 15 U.S.C. §§ 1051(b), 1126(d), and/or 1126(e), or filed a collective/certification mark application under 15 U.S.C. §1141f(a), the signatory additionally believes that: for a trademark or service mark application, the applicant is entitled to use the mark in commerce on or in connection with the goods/services specified in the application; the applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date; for a collective trademark, collective service mark, collective membership mark, or certification mark application, the applicant has a bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce and had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce as of the application filing date; the signatory is properly authorized to execute the declaration on behalf of the applicant; for a certification mark application, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

Signature: /Michael G. Atkins/      Date: 01/21/2020
Signatory's Name: Michael G. Atkins
Signatory's Position: Attorney of record, Washington bar member
Signatory's Phone Number: 206-628-0983


Response Signature
Signature: /Michael G. Atkins/     Date: 01/21/2020
Signatory's Name: Michael G. Atkins
Signatory's Position: Attorney of record, Washington bar member

Signatory's Phone Number: 206-628-0983

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

Mailing Address:    Michael G. Atkins
   Atkins Intellectual Property, PLLC
   
   113 Cherry Street #18483
   Seattle, Washington 98104-2205
Mailing Address:    Michael G. Atkins
   Atkins Intellectual Property, PLLC
   113 Cherry Street #18483
   Seattle, Washington 98104-2205
        
RAM Sale Number: 88500413
RAM Accounting Date: 01/21/2020
        
Serial Number: 88500413
Internet Transmission Date: Tue Jan 21 05:57:03 EST 2020
TEAS Stamp: USPTO/ROA-XX.XX.XX.XX-202001210557031242
46-88500413-7002a8b36321e7f5216d569d8107
b75735d5270d364b2377def292396f85755cf4-C
C-57013748-20200121055420589046