Offc Action Outgoing

United States Patent and Trademark Office (USPTO)

Office Action (Official Letter) About Applicant’s Trademark Application

 

 

 

NONFINAL OFFICE ACTION

 

The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned.  Respond using the Trademark Electronic Application System (TEAS).  A link to the appropriate TEAS response form appears at the end of this Office action. 

 

 

Issue date:  September 23, 2019

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SUMMARY OF ISSUES:

 

• Refusal under Trademark Act Section 2(d) – Likelihood of Confusion
• Notice of Prior Pending Application – Potential Refusal under Trademark Act Section 2(d) – Likelihood of Confusion
• Requirement to Amend the Description of the Mark
• Requirement to Amend the Identification of Goods

 

SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION

Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 4230426 (“DB”).  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the attached registration.

 

The applicant has applied to register the mark “DB (& DESIGN)” for “carbon steel, stainless steel, self drilling, self tapping fasteners,” in International Class 6.

 

The cited registration is “DB” (U.S. Registration No. 4230426) for “Commercial roofing fastener load and stress distribution plates that are primarily made of metal and coated for induction welding to a barrier membrane,” also in International Class 6.

 

Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods and/or services of the parties.  See 15 U.S.C. §1052(d).  Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”).  In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017).  Only those factors that are “relevant and of record” need be considered.  M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018). 

 

Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis:  (1) the similarities between the compared marks and (2) the relatedness of the compared goods and/or services.  See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.

 

Comparing the Marks.

 

Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression.  Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v).  “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.”  In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)); TMEP §1207.01(b).

 

When comparing marks, “[t]he proper test is not a side-by-side comparison of the marks, but instead whether the marks are sufficiently similar in terms of their commercial impression such that [consumers] who encounter the marks would be likely to assume a connection between the parties.”  Cai v. Diamond Hong, Inc., __ F.3d __, 127 USPQ2d 1797, 1801 (Fed. Cir. 2018) (quoting Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1368, 101 USPQ2d 1713, 1721 (Fed. Cir. 2012)); TMEP §1207.01(b).  The proper focus is on the recollection of the average purchaser, who retains a general rather than specific impression of trademarks.  In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re St. Helena Hosp., 774 F.3d 747, 750-51, 113 USPQ2d 1082, 1085 (Fed. Cir. 2014); Geigy Chem. Corp. v. Atlas Chem. Indus., Inc., 438 F.2d 1005, 1007, 169 USPQ 39, 40 (CCPA 1971)); TMEP §1207.01(b).

 

 

 

The word portions of the marks are identical in appearance, sound, connotation, and commercial impression (the literal element of the applied-for mark is identical to the entirety of the cited registered mark); therefore, the addition of a design element does not obviate the similarity of the marks in this case.  See In re Shell Oil Co., 992 F.2d 1204, 1206, 26 USPQ2d 1687, 1688 (Fed. Cir. 1993); TMEP §1207.01(c)(ii).

 

Therefore, the marks are confusingly similar.

Comparing the Goods

The goods are compared to determine whether they are similar, commercially related, or travel in the same trade channels.  See Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369-71, 101 USPQ2d 1713, 1722-23 (Fed. Cir. 2012); Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1165, 64 USPQ2d 1375, 1381 (Fed. Cir. 2002); TMEP §§1207.01, 1207.01(a)(vi).

 

The compared goods need not be identical or even competitive to find a likelihood of confusion.  See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000); TMEP §1207.01(a)(i).  They need only be “related in some manner and/or if the circumstances surrounding their marketing are such that they could give rise to the mistaken belief that [the goods] emanate from the same source.”  Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).

 

The presumption under Trademark Act Section 7(b) is that the registrant is the owner of the mark and that their use of the mark extends to all goods and/or services identified in the registration.  15 U.S.C. §1057(b).  In the absence of limitations as to channels of trade or classes of purchasers in the goods and/or services in the registration, the presumption is that the goods and/or services move in all trade channels normal for such goods and/or services and are available to all potential classes of ordinary consumers of such goods and/or services.  See In re I-Coat Co., 126 USPQ2d 1730, 1737 (TTAB 2018); In re Melville Corp., 18 USPQ2d 1386, 1388 (TTAB 1991); TMEP §1207.01(a)(iii).

 

In this case, the application uses broad wording to describe “carbon steel, stainless steel, self drilling, self tapping fasteners,” which presumably encompasses all goods of the type described, including registrant’s more narrow “Commercial roofing fastener load and stress distribution plates that are primarily made of metal and coated for induction welding to a barrier membrane.”  See, e.g., In re Solid State Design Inc., 125 USPQ2d 1409, 1412-15 (TTAB 2018); Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015).  Thus, applicant’s and registrant’s goods are legally identical.  See, e.g., In re i.am.symbolic, llc, 127 USPQ2d 1627, 1629 (TTAB 2018) (citing Tuxedo Monopoly, Inc. v.Gen. Mills Fun Grp., Inc., 648 F.2d 1335, 1336, 209 USPQ 986, 988 (C.C.P.A. 1981); Inter IKEA Sys. B.V. v. Akea, LLC, 110 USPQ2d 1734, 1745 (TTAB 2014); Baseball Am. Inc. v. Powerplay Sports Ltd., 71 USPQ2d 1844, 1847 n.9 (TTAB 2004)).

 

Additionally, the goods of the parties have no restrictions as to nature, type, channels of trade, or classes of purchasers and are “presumed to travel in the same channels of trade to the same class of purchasers.”  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)).  Thus, applicant’s and registrant’s goods are related.

 

Accordingly, the applicant’s proposed mark, “DB (& DESIGN)”, is refused for likelihood of confusion under Trademark Act Section 2(d).

 

NOTICE OF PRIOR PENDING APPLICATION

 

The filing date of pending U.S. Application Serial Nos. 88432150 and 88421056 precedes applicant’s filing date.  See attached referenced applications.  If the mark in one or both of the referenced applications registers, applicant’s mark may be refused registration under Trademark Act Section 2(d) because of a likelihood of confusion between the marks.  See 15 U.S.C. §1052(d); 37 C.F.R. §2.83; TMEP §§1208 et seq.  Therefore, upon receipt of applicant’s response to this Office action, action on this application may be suspended pending final disposition of the earlier-filed referenced applications.

 

In response to this Office action, applicant may present arguments in support of registration by addressing the issue of the potential conflict between applicant’s mark and the mark in the referenced applications.  Applicant’s election not to submit arguments at this time in no way limits applicant’s right to address this issue later if a refusal under Section 2(d) issues.

 

Although applicant’s mark has been refused registration, applicant may respond to the refusal(s) by submitting evidence and arguments in support of registration.

 

If applicant responds to the refusal(s), applicant must also respond to the requirement(s) set forth below.

 

DESCRIPTION OF MARK REQUIRED

 

Applicant must submit an amended description of the mark because the current one uses broad, vague language that does not accurately describe the mark.  37 C.F.R. §2.37; see TMEP §§808.01, 808.02.  Descriptions must be accurate and identify all the literal and design elements in the mark.  See 37 C.F.R. §2.37; TMEP §808.02.  In this case, the description is vague because it does not adequately describe the design elements depicted in the drawing. 

 

Additionally, although applicant submitted a drawing showing the mark in color with a color claim, applicant did not provide the required description that specifies where each color appears in the literal and design elements in the mark.  See 37 C.F.R. §§2.37, 2.52(b)(1); TMEP §807.07(a)-(a)(ii).  Therefore, applicant must provide this description.  See TMEP §807.07(a)(ii). 

 

Generic color names must be used to describe the colors in the mark, e.g., red, yellow, blue.  TMEP §807.07(a)(i)-(ii).  If black, white, and/or gray represent background, outlining, shading, and/or transparent areas and are not part of the mark, applicant must so specify in the description.  See TMEP §807.07(d).

 

The following description is suggested, if accurate:  The mark consists of a highly stylized dark blue metal roof with a dark blue highly stylized modern “d” and a light blue highly stylized “b” above and to the left and right, respectively.

 

 

 

IDENTIFICATION OF GOODS

 

Applicant must correct the punctuation in the identification to clarify the individual items in the list of goods and/or services.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01(a).  Proper punctuation in identifications is necessary to delineate explicitly each product or service within a list and to avoid ambiguity.  Commas, semicolons, and apostrophes are the only punctuation that should be used in an identification of goods and/or services.  TMEP §1402.01(a).  An applicant should not use colons, periods, exclamation points, and question marks in an identification.  Id.  In addition, applicants should not use symbols in the identification such as asterisks (*), at symbols (@), or carets.  Id.

 

In general, commas should be used in an identification (1) to separate a series of related items identified within a particular category of goods or services, (2) before and after “namely,” and (3) between each item in a list of goods or services following “namely” (e.g., personal care products, namely, body lotion, bar soap, shampoo).  Id.  Semicolons generally should be used to separate a series of distinct categories of goods or services within an international class (e.g., personal care products, namely, body lotion; deodorizers for pets; glass cleaners).  Id. 

 

Additionally, the identification of goods is indefinite and must be clarified because the nature of the goods is not adequately described.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Applicant must amend the identification to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  If the goods have no common commercial or generic name, applicant must describe the product, its main purpose, and its intended uses.  See id.

 

Applicant may adopt the following wording (suggestions appear in bold text), if accurate: 

 

INT. CLASS 6.

 

carbon steels; stainless steels; metal self drilling and self tapping fasteners, namely, {indicate specific items, e.g., bolts, nails, rivets, screws}.

 

Applicant’s goods may be clarified or limited, but may not be expanded beyond those originally itemized in the application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Applicant may clarify or limit the identification by inserting qualifying language or deleting items to result in a more specific identification; however, applicant may not substitute different goods and/or services or add goods not found or encompassed by those in the original application or as acceptably amended.  See TMEP §1402.06(a)-(b).  The scope of the goods sets the outer limit for any changes to the identification and is generally determined by the ordinary meaning of the wording in the identification.  TMEP §§1402.06(b), 1402.07(a)-(b).  Any acceptable changes to the goods will further limit scope, and once goods are deleted, they are not permitted to be reinserted.  TMEP §1402.07(e).

 

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

RESPONSE GUIDELINES 

 

For this application to proceed, applicant must explicitly address each refusal and/or requirement in this Office action.  For a refusal, applicant may provide written arguments and evidence against the refusal, and may have other response options if specified above.  For a requirement, applicant should set forth the changes or statements.  Please see “Responding to Office Actions” and the informational video “Response to Office Action” for more information and tips on responding.

 

Because of the legal technicalities and strict deadlines of the trademark application process, applicant may wish to hire a private attorney who specializes in trademark matters to assist in the process.  The assigned trademark examining attorney can provide only limited assistance explaining the content of an Office action and the application process.  USPTO staff cannot provide legal advice or statements about an applicant’s legal rights.  TMEP §§705.02, 709.06.  See Hiring a U.S.-licensed trademark attorney for more information.

 

Please call or email the assigned trademark examining attorney with questions about this Office action.  Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the refusal(s) and/or requirement(s) in this Office action.  See TMEP §§705.02, 709.06.  Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

How to respond.  Click to file a response to this nonfinal Office action  

 

 

/Michael Ebaugh/

Examining Attorney

Law Office 108

(571) 270-3341

michael.ebaugh@uspto.gov

 

 

 

 

RESPONSE GUIDANCE

• Missing the response deadline to this letter will cause the application to abandon.  A response or notice of appeal must be received by the USPTO before midnight Eastern Time of the last day of the response period.  TEAS and ESTTA maintenance or unforeseen circumstances could affect an applicant’s ability to timely respond.  

 

• Responses signed by an unauthorized party are not accepted and can cause the application to abandon.  If applicant does not have an attorney, the response must be signed by the individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant.  If applicant has an attorney, the response must be signed by the attorney.

 

• If needed, find contact information for the supervisor of the office or unit listed in the signature block.

 

United States Patent and Trademark Office (USPTO)

 

USPTO OFFICIAL NOTICE

 

Office Action (Official Letter) has issued

on September 23, 2019 for

U.S. Trademark Application Serial No. 88498643

 

Your trademark application has been reviewed by a trademark examining attorney.  As part of that review, the assigned attorney has issued an official letter that you must respond to by the specified deadline or your application will be abandoned.  Please follow the steps below.

 

(1)  Read the official letter.

 

(2)  Direct questions about the contents of the Office action to the assigned attorney below. 

 

 

/Michael Ebaugh/

Examining Attorney

Law Office 108

(571) 270-3341

michael.ebaugh@uspto.gov

 

 

 

Direct questions about navigating USPTO electronic forms, the USPTO website, the application process, the status of your application, and/or whether there are outstanding deadlines or documents related to your file to the Trademark Assistance Center (TAC).

 

(3)  Respond within 6 months (or earlier, if required in the Office action) from September 23, 2019, using the Trademark Electronic Application System (TEAS).  The response must be received by the USPTO before midnight Eastern Time of the last day of the response period.  See the Office action for more information about how to respond.

 

 

 

GENERAL GUIDANCE

·         Check the status of your application periodically in the Trademark Status & Document Retrieval (TSDR) database to avoid missing critical deadlines.

 

·         Update your correspondence email address, if needed, to ensure you receive important USPTO notices about your application.

 

·         Beware of misleading notices sent by private companies about your application.  Private companies not associated with the USPTO use public information available in trademark registrations to mail and email trademark-related offers and notices – most of which require fees.  All official USPTO correspondence will only be emailed from the domain “@uspto.gov.”