Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88496125 KANGO(Standard Characters, see http://uspto.report/TM/88496125/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 006 for Tool boxes of metal; tools chests of metal sold empty; pipes and tubes of metal; junctions of metal for tubes being pipes; elbows of metal for tubes being pipes; metal clips for tubes being pipes; metal, wash down spray nozzles for commercial and industrial use; metal nozzle plugs; metal plugs for sealing; locking nut assemblies being metal nuts; structural joint connectors of metal; nails; metal nuts; metal hardware, namely, press rings; screw rings of metal; socket head cap screw of metal; cask stands of metal; wire rope fittings of metal, namely, studs; metal door locks; metal tiles; industrial metal hoses; parts, fittings and accessories for the aforementioned goods
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Tool boxes of metal; tools chests of metal sold empty; pipes and tubes of metal; junctions of metal for tubes being pipes; elbows of metal for tubes being pipes; metal clips for tubes being pipes; metal, wash down spray nozzles for commercial and industrial use; metal nozzle plugs; metal plugs for sealing; locking nut assemblies being metal nuts; structural joint connectors of metal; nails; metal nuts; metal hardware, namely, press rings; screw rings of metal; socket head cap screw of metal; cask stands of metal; wire rope fittings of metal, namely, studs; metal door locks; metal tiles; industrial metal hoses; parts, fittings and accessories for the aforementioned goods; structural parts, structural fittings and structural accessories for the aforementioned goodsClass 006 for Tool boxes of metal; tools chests of metal sold empty; pipes and tubes of metal; junctions of metal for tubes being pipes; elbows of metal for tubes being pipes; metal clips for tubes being pipes; metal, wash down spray nozzles for commercial and industrial use; metal nozzle plugs; metal plugs for sealing; locking nut assemblies being metal nuts; structural joint connectors of metal; nails; metal nuts; metal hardware, namely, press rings; screw rings of metal; socket head cap screw of metal; cask stands of metal; wire rope fittings of metal, namely, studs; metal door locks; metal tiles; industrial metal hoses; structural parts, structural fittings and structural accessories for the aforementioned goods
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 007 for Power drills; pile drivers; power tools, namely, impact drivers; impact wrenches; power operated saws; power saw blades; circular saws; reciprocating saws; power-operated jig saws; table saws; power tools, namely, tile saws; band saws; power tools, namely, abrasive saws; power tools, namely, chop saws; stands for machines in the nature of saws; grinders; power tools, namely, routers; electric rotary hammers; electric demolition hammers; power tools, namely, hammer drills; electrical percussion machine tools in the nature of power-operated percussion hammer drills; electric sanders; power tools, namely, oil pulse impact drivers; power-operated screwdrivers; power tools, namely, screw guns; cordless power-operated nailing guns; power operated mixers; power-operated tile cutter; power-operated planers; power tools, namely, drill presses; power-operated tools, namely, multi-tools for use with interchangeable heads for cutting, sanding, grinding, polishing, sawing, drilling, scraping, driving, fastening and/or hammering; power-operated hammers; power-operated nailing guns; pneumatic brad nailing guns; pneumatic staplers; pneumatic finish nailing guns for cutting or shaping or finishing metals or other materials; pneumatic framers being power-operated frame nailing guns; pneumatic palm nailing guns; pneumatic pinners being power-operated pin nailing guns; pneumatic impact wrenches; compressors for machines; inflators in the nature of power operated inflators; power operated pumps; rivet guns; hoists; electronic and magnetic stud finders; electric arc welders; power-operated sprayers; power-operated polishers; power-operated hand-held plumbing augers; plumbing tools, namely, power operated plumbing snakes and cables; power-operated bolt cutters; electric caulking and hot adhesive guns; rotary tools, namely, rotary pumps, rotary blowers, rotary compressors; industrial robots; cutting bits for power drills; suction cups for maneuvering tiles, marble, granite, and glass; mechanically operated rotary and percussion tools, namely, rotary pumps, rotary blowers, rotary compressors; air blowers in the nature of power operated blowers; vacuum cleaners; pressure washing machines and apparatus; machine parts, namely, surge tanks; electric door openers; hoses for vacuum cleaners; power drill bits; driver bits for power tools; carrying suitcases specially adapted for holding or carrying power tools; specialty holsters adapted for carrying electric drilling and fastening tools; power tools parts, namely, collets; gas welding gun parts, namely, collet bodies; machine parts, namely, couplers of synthetic material; punches being punching machines; stands for machines; diamond cutting bits being bits for diamond-pointed metal-cutting tools; straps for power tools and machinery parts, fittings and accessories for the aforementioned goods
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Power drills; pile drivers; power tools, namely, impact drivers; impact wrenches; power operated saws; power saw blades; circular saws; reciprocating saws; power-operated jig saws; table saws; power tools, namely, tile saws; band saws; power tools, namely, abrasive saws; power tools, namely, chop saws; stands for machines in the nature of saws; grinders; power tools, namely, routers; electric rotary hammers; electric demolition hammers; power tools, namely, hammer drills; electrical percussion machine tools in the nature of power-operated percussion hammer drills; electric sanders; power tools, namely, oil pulse impact drivers; power-operated screwdrivers; power tools, namely, screw guns; cordless power-operated nailing guns; power operated mixers; power-operated tile cutter; power-operated planers; power tools, namely, drill presses; power-operated tools, namely, multi-tools for use with interchangeable heads for cutting, sanding, grinding, polishing, sawing, drilling, scraping, driving, fastening and/or hammering; power-operated hammers; power-operated nailing guns; pneumatic brad nailing guns; pneumatic staplers; pneumatic finish nailing guns for cutting or shaping or finishing metals or other materials; pneumatic framers being power-operated frame nailing guns; pneumatic palm nailing guns; pneumatic pinners being power-operated pin nailing guns; pneumatic impact wrenches; compressors for machines; inflators in the nature of power operated inflators; power operated pumps; rivet guns; hoists; electronic and magnetic stud finders; electric arc welders; power-operated sprayers; power-operated polishers; power-operated hand-held plumbing augers; plumbing tools, namely, power operated plumbing snakes and cables; power-operated bolt cutters; electric caulking and hot adhesive guns; rotary tools, namely, rotary pumps, rotary blowers, rotary compressors; industrial robots; cutting bits for power drills; suction cups for maneuvering tiles, marble, granite, and glass; mechanically operated rotary and percussion tools, namely, rotary pumps, rotary blowers, rotary compressors; air blowers in the nature of power operated blowers; vacuum cleaners; pressure washing machines and apparatus; machine parts, namely, surge tanks; electric door openers; hoses for vacuum cleaners; power drill bits; driver bits for power tools; carrying suitcases specially adapted for holding or carrying power tools; specialty holsters adapted for carrying electric drilling and fastening tools; power tools parts, namely, collets; gas welding gun parts, namely, collet bodies; machine parts, namely, couplers of synthetic material; punches being punching machines; stands for machines; diamond cutting bits being bits for diamond-pointed metal-cutting tools; straps for power tools and machinery parts, fittings and accessories for the aforementioned goods; straps specially adapted for power tools and machinery parts; structural parts, structural fittings and structural accessories for the aforementioned goodsClass 007 for Power drills; pile drivers; power tools, namely, impact drivers; impact wrenches; power operated saws; power saw blades; circular saws; reciprocating saws; power-operated jig saws; table saws; power tools, namely, tile saws; band saws; power tools, namely, abrasive saws; power tools, namely, chop saws; stands for machines in the nature of saws; grinders; power tools, namely, routers; electric rotary hammers; electric demolition hammers; power tools, namely, hammer drills; electrical percussion machine tools in the nature of power-operated percussion hammer drills; electric sanders; power tools, namely, oil pulse impact drivers; power-operated screwdrivers; power tools, namely, screw guns; cordless power-operated nailing guns; power operated mixers; power-operated tile cutter; power-operated planers; power tools, namely, drill presses; power-operated tools, namely, multi-tools for use with interchangeable heads for cutting, sanding, grinding, polishing, sawing, drilling, scraping, driving, fastening and/or hammering; power-operated hammers; power-operated nailing guns; pneumatic brad nailing guns; pneumatic staplers; pneumatic finish nailing guns for cutting or shaping or finishing metals or other materials; pneumatic framers being power-operated frame nailing guns; pneumatic palm nailing guns; pneumatic pinners being power-operated pin nailing guns; pneumatic impact wrenches; compressors for machines; inflators in the nature of power operated inflators; power operated pumps; rivet guns; hoists; electronic and magnetic stud finders; electric arc welders; power-operated sprayers; power-operated polishers; power-operated hand-held plumbing augers; plumbing tools, namely, power operated plumbing snakes and cables; power-operated bolt cutters; electric caulking and hot adhesive guns; rotary tools, namely, rotary pumps, rotary blowers, rotary compressors; industrial robots; cutting bits for power drills; suction cups for maneuvering tiles, marble, granite, and glass; mechanically operated rotary and percussion tools, namely, rotary pumps, rotary blowers, rotary compressors; air blowers in the nature of power operated blowers; vacuum cleaners; pressure washing machines and apparatus; machine parts, namely, surge tanks; electric door openers; hoses for vacuum cleaners; power drill bits; driver bits for power tools; carrying suitcases specially adapted for holding or carrying power tools; specialty holsters adapted for carrying electric drilling and fastening tools; power tools parts, namely, collets; gas welding gun parts, namely, collet bodies; machine parts, namely, couplers of synthetic material; punches being punching machines; stands for machines; diamond cutting bits being bits for diamond-pointed metal-cutting tools; straps specially adapted for power tools and machinery parts; structural parts, structural fittings and structural accessories for the aforementioned goods
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 008 for Hand-operated tools, namely, hammers, drills, cutting tools, abrading tools, pliers, spanners, nut drivers, shears, trowels, floats for grout, mortar or cement, tile nippers, trim cutters, cutter bars, grout brushes, tile brushes, tile files, tile sharpening stones, tile spacers, removal tools, tile leveling spacers, tubing cutters, snips, wire strippers, clamps, chisels, sanders, mauls, punches, plumbing augers, saws, saw blades, edgers, screwdrivers, scissors, scrapers, mixing paddles for mixing grout, masonry trowels, concrete edgers, concrete groovers, pole sanders, taping knives, scoring knives, bolt cutters, wrenches, saws; blades for hand saws; hand-operated pumps; hand-powered nailing and staple guns, hand-operated planer; hand-operated circle cutters; hand-operated drywall finishing tools, namely, mud pans, drywall hawks; hand-operated plastering tools, namely, scrapers, trowels, mixing paddles; hand tools for use in the garden, namely, shovels, rakes, forks, post hole diggers; utility knives; blades for utility knives; tool bags; tool belts; tool bags for attachments to tool belts; tool pouches for attachment to tool belts; parts, fittings and accessories for the aforementioned goods
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Hand-operated tools, namely, hammers, drills, cutting tools, abrading tools, pliers, spanners, nut drivers, shears, trowels, floats for grout, mortar or cement, tile nippers, trim cutters, cutter bars, grout brushes, tile brushes, tile files, tile sharpening stones, tile spacers, removal tools, tile leveling spacers, tubing cutters, snips, wire strippers, clamps, chisels, sanders, mauls, punches, plumbing augers, saws, saw blades, edgers, screwdrivers, scissors, scrapers, mixing paddles for mixing grout, masonry trowels, concrete edgers, concrete groovers, pole sanders, taping knives, scoring knives, bolt cutters, wrenches, saws; blades for hand saws; hand-operated pumps; hand-powered nailing and staple guns, hand-operated planer; hand-operated circle cutters; hand-operated drywall finishing tools, namely, mud pans, drywall hawks; hand-operated plastering tools, namely, scrapers, trowels, mixing paddles; hand tools for use in the garden, namely, shovels, rakes, forks, post hole diggers; utility knives; blades for utility knives; tool bags; tool belts; tool bags for attachments to tool belts; tool bags sold filled with tools for attachments to tool belts; tool pouches for attachment to tool belts; parts, fittings and accessories for the aforementioned goods; structural parts, structural fittings and structural accessories for the aforementioned goodsClass 008 for Hand-operated tools, namely, hammers, drills, cutting tools, abrading tools, pliers, spanners, nut drivers, shears, trowels, floats for grout, mortar or cement, tile nippers, trim cutters, cutter bars, grout brushes, tile brushes, tile files, tile sharpening stones, tile spacers, removal tools, tile leveling spacers, tubing cutters, snips, wire strippers, clamps, chisels, sanders, mauls, punches, plumbing augers, saws, saw blades, edgers, screwdrivers, scissors, scrapers, mixing paddles for mixing grout, masonry trowels, concrete edgers, concrete groovers, pole sanders, taping knives, scoring knives, bolt cutters, wrenches, saws; blades for hand saws; hand-operated pumps; hand-powered nailing and staple guns, hand-operated planer; hand-operated circle cutters; hand-operated drywall finishing tools, namely, mud pans, drywall hawks; hand-operated plastering tools, namely, scrapers, trowels, mixing paddles; hand tools for use in the garden, namely, shovels, rakes, forks, post hole diggers; utility knives; blades for utility knives; tool bags; tool belts; tool bags sold filled with tools for attachments to tool belts; tool pouches for attachment to tool belts; structural parts, structural fittings and structural accessories for the aforementioned goods
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 009 for Battery chargers; batteries; portable power source being portable battery chargers; radios; protective clothing, namely, knee pads, gloves; measuring apparatus and instruments in the nature of tape measures and levels; inspection devices connected to cameras, namely, video camera heads, push rod cables, and couplings for connecting the video camera heads to the push rod cables for internal inspection of pipes; digital multimeters; parts, fittings and accessories for the aforementioned goods; battery charge devices
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Battery chargers; batteries; portable power source being portable battery chargers; radios; protective clothing, namely, knee pads, gloves; measuring apparatus and instruments in the nature of tape measures and levels; inspection devices connected to cameras, namely, video camera heads, push rod cables, and couplings for connecting the video camera heads to the push rod cables for internal inspection of pipes; digital multimeters; parts, fittings and accessories for the aforementioned goods; structural parts, structural fittings and structural accessories for the aforementioned goods; battery charge devicesClass 009 for Battery chargers; batteries; portable power source being portable battery chargers; radios; protective clothing, namely, knee pads, gloves; measuring apparatus and instruments in the nature of tape measures and levels; inspection devices connected to cameras, namely, video camera heads, push rod cables, and couplings for connecting the video camera heads to the push rod cables for internal inspection of pipes; digital multimeters; structural parts, structural fittings and structural accessories for the aforementioned goods; battery charge devices
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 011 for Portable propane heaters; lighting apparatus, namely, flood lights, flashlights, LED worklights and area lights; electric fans; heat guns; electric hot air guns being heat guns; hot air blowers; portable coolers; parts, fittings and accessories for the aforementioned goods
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Portable propane heaters; lighting apparatus, namely, flood lights, flashlights, LED worklights and area lights; electric fans; heat guns; electric hot air guns being heat guns; hot air blowers; portable coolers; portable evaporative air coolers; parts, fittings and accessories for the aforementioned goods; structural parts, structural fittings and structural accessories for the aforementioned goodsClass 011 for Portable propane heaters; lighting apparatus, namely, flood lights, flashlights, LED worklights and area lights; electric fans; heat guns; electric hot air guns being heat guns; hot air blowers; portable evaporative air coolers; structural parts, structural fittings and structural accessories for the aforementioned goods
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 012 for Robotic cars; drones; camera drones; parts, fittings and accessories for the aforementioned goods
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Robotic cars; drones; camera drones; parts, fittings and accessories for the aforementioned goods; structural parts, structural fittings and structural accessories for the aforementioned goodsClass 012 for Robotic cars; drones; camera drones; structural parts, structural fittings and structural accessories for the aforementioned goods
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

ADDITIONAL STATEMENTS
Miscellaneous Statement
Applicant owns Application Serial Nos. 88975527 and 88079086.


SIGNATURE(S)
Declaration Signature

DECLARATION: The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that, if the applicant submitted the application or allegation of use (AOU) unsigned, all statements in the application or AOU and this submission based on the signatory's own knowledge are true, and all statements in the application or AOU and this submission made on information and belief are believed to be true.

STATEMENTS FOR UNSIGNED SECTION 1(a) APPLICATION/AOU: If the applicant filed an unsigned application under 15 U.S.C. §1051(a) or AOU under 15 U.S.C. §1051(c), the signatory additionally believes that: the applicant is the owner of the mark sought to be registered; the mark is in use in commerce and was in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; the original specimen(s), if applicable, shows the mark in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; for a collective trademark, collective service mark, collective membership mark application, or certification mark application, the applicant is exercising legitimate control over the use of the mark in commerce and was exercising legitimate control over the use of the mark in commerce as of the filing date of the application or AOU; for a certification mark application, the applicant is not engaged in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

STATEMENTS FOR UNSIGNED SECTION 1(b)/SECTION 44 APPLICATION AND FOR SECTION 66(a) COLLECTIVE/CERTIFICATION MARK APPLICATION: If the applicant filed an unsigned application under 15 U.S.C. §§ 1051(b), 1126(d), and/or 1126(e), or filed a collective/certification mark application under 15 U.S.C. §1141f(a), the signatory additionally believes that: for a trademark or service mark application, the applicant is entitled to use the mark in commerce on or in connection with the goods/services specified in the application; the applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date; for a collective trademark, collective service mark, collective membership mark, or certification mark application, the applicant has a bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce and had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce as of the application filing date; the signatory is properly authorized to execute the declaration on behalf of the applicant; for a certification mark application, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

Signature: /Louise Arnott/      Date: 11/22/2019
Signatory's Name: Louise Arnott
Signatory's Position: Associate of Attorney of Record, Illinois Bar Member
Signatory's Phone Number: 312.596.5894


Response Signature
Signature: /Louise Arnott/     Date: 11/22/2019
Signatory's Name: Louise Arnott
Signatory's Position: Associate of Attorney of Record, Illinois Bar Member

Signatory's Phone Number: 312.596.5894

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

        
Serial Number: 88496125
Internet Transmission Date: Fri Nov 22 12:00:37 EST 2019
TEAS Stamp: USPTO/ROA-XX.XX.XXX.XXX-2019112212003743
3504-88496125-70043ec8453ab9998123b301c3
6c8b987415845be5450f146bf24b13749c9369f9
-N/A-N/A-20191122115015785270