Offc Action Outgoing

United States Patent and Trademark Office (USPTO)

Office Action (Official Letter) About Applicant’s Trademark Application

 

 

 

NONFINAL OFFICE ACTION

 

The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned.  Respond using the Trademark Electronic Application System (TEAS).  A link to the appropriate TEAS response form appears at the end of this Office action. 

 

 

Issue date:  September 18, 2019

 

 

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

 

Refusal – Likelihood of Confusion – Metal Washers Only

 

Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 3500588.  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the enclosed registration.

 

Applicant seeks to register the mark EAGLE for goods including metal washers.  The registered mark is EAGLE PNEUMATICS with a disclaimer of PNEUMATICS for metal fasteners, namely, nails and screws.

 

Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods and/or services of the parties.  See 15 U.S.C. §1052(d).  Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”).  In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017).  Only those factors that are “relevant and of record” need be considered.  M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018). 

 

Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis:  (1) the similarities between the compared marks and (2) the relatedness of the compared goods and/or services.  See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.

 

 

 

 

Similarity Of The Marks

 

The registered mark is EAGLE PNEUMATICS with a disclaimer of PNEUMATICS.  Applicant’s mark is EAGLE.  Applicant has appropriated the registered mark, deleting the descriptive term PNEUMATICS to create its own mark.  Although applicant’s mark does not contain the entirety of the registered mark, applicant’s mark is likely to appear to prospective purchasers as a shortened form of registrant’s mark.  See In re Mighty Leaf Tea, 601 F.3d 1342, 1348, 94 USPQ2d 1257, 1260 (Fed. Cir. 2010) (quoting United States Shoe Corp., 229 USPQ 707, 709 (TTAB 1985)).  Thus, merely omitting some of the wording from a registered mark may not overcome a likelihood of confusion.  See In re Mighty Leaf Tea, 601 F.3d 1342, 94 USPQ2d 1257; In re Optica Int’l, 196 USPQ 775, 778 (TTAB 1977); TMEP §1207.01(b)(ii)-(iii).  In this case, applicant’s mark does not create a distinct commercial impression from the registered mark because it contains some of the wording in the registered mark and does not add any wording that would distinguish it from that mark.  The mere deletion of the descriptive term PNEUMATICS is insufficient to distinguish the mark to obviate confusion.

 

Where the goods and/or services of an applicant and registrant are “similar in kind and/or closely related,” the degree of similarity between the marks required to support a finding of likelihood of confusion is not as great as in the case of diverse goods and/or services.  In re J.M. Originals Inc., 6 USPQ2d 1393, 1394 (TTAB 1987); see Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1242, 73 USPQ2d 1350, 1354 (Fed. Cir. 2004); TMEP §1207.01(b).  In this case, the goods are closely related.

 

Similarity Of Goods/Services And Channels Of Trade

 

The goods and/or services of the parties need not be identical or even competitive to find a likelihood of confusion.  See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000) (“[E]ven if the goods in question are different from, and thus not related to, one another in kind, the same goods can be related in the mind of the consuming public as to the origin of the goods.”); TMEP §1207.01(a)(i). 

 

The respective goods and/or services need only be “related in some manner and/or if the circumstances surrounding their marketing [be] such that they could give rise to the mistaken belief that [the goods and/or services] emanate from the same source.”  Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); Gen. Mills Inc. v. Fage Dairy Processing Indus. SA, 100 USPQ2d 1584, 1597 (TTAB 2011); TMEP §1207.01(a)(i).

 

Applicant goods include metal washers.  The registered mark is for metal fasteners, namely, nails and screws.  The attached evidence from the following sources shows that the goods are commonly produced by the same hardware manufacturers:

 

G-Fast

“Cold-headed screws assembled with captive washer”

Metal Washers & Screws: http://g-fast.com/products/screws/

Metal Washers: http://g-fast.com/products/washers/

 

Hillman

Metal Washers & Screws: http://www.hillmangroup.com/us/en/Fastening-Solutions/Fasteners/c/240

Screws & Nails: http://www.hillmangroup.com/us/en/Fastening-Solutions/Construction-Fastener-Products/c/241

 

Suncor Stainless

Metal Washers & Screws: http://www.suncorstainless.com/fasteners

Nails: http://www.suncorstainless.com/stainless-spike

 

Wurth USA

Metal Washers: http://www.wurthusa.com/search/?text=washer

Screws: http://www.wurthusa.com/Hardware/US-Hardware/Screws/c/180114

 

 

Although links to the evidence have been provided within the body of this Office action for applicant’s convenience, complete copies are attached hereto.  The evidence also shows that the goods are complementary in that they are used together.  Where evidence shows that the goods at issue have complementary uses, and thus are often used together or otherwise purchased by the same purchasers for the same or related purposes, such goods have generally been found to be sufficiently related such that confusion would be likely if they are marketed under the same or similar marks.  See In re Martin’s Famous Pastry Shoppe, Inc., 748 F.2d 1565, 1567, 223 USPQ 1289, 1290 (Fed. Cir. 1984) (holding bread and cheese to be related because they are often used in combination and noting that “[s]uch complementary use has long been recognized as a relevant consideration in determining a likelihood of confusion”); In re Toshiba Med. Sys. Corp., 91 USPQ2d 1266, 1272 (TTAB 2009) (holding medical MRI diagnostic apparatus and medical ultrasound devices to be related, based in part on the fact that such goods have complementary purposes because they may be used by the same medical personnel on the same patients to treat the same disease). 

 

For the foregoing reasons, registration is refused under Trademark Act Section 2(d).

 

 

Although applicant’s mark has been refused registration, applicant may respond to the refusal by submitting evidence and arguments in support of registration.

 

If applicant responds to the refusal, applicant must also respond to the requirements set forth below.

 

 

Identification

 

The identification of goods “Grommeting machines, metal grommets and metal washers” is unacceptable and must be clarified because it refers to goods in different classes.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  The bold italicized wording below indicates the nature of the detail required.  The underlined italicized wording in brackets indicates the need for information that applicant must provide.  Applicant may adopt the following identification, if accurate: 

 

Metal grommets and metal washers in International Class 6; and/or

 

Grommeting machines in International Class 7.

 

In an identification, an applicant must use the common commercial or generic name for the goods, be specific and all-inclusive, and avoid using indefinite words or phrases.  TMEP§§1402.01, 1402.03(a).  Further, applicant may amend the identification to list only those items that are within the scope of the goods set forth in the initial application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §§1402.06 et seq., 1402.07.  Scope is generally determined by the ordinary meaning of the wording in the identification.  TMEP §1402.07(a).

 

For assistance in crafting acceptable identification wording, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.  For guidance regarding wording that is not listed in the manual, applicant should consider wording from registrations and approved applications that have been accepted/approved within the last year.

 

 

Multiple Class Applications  

 

The application identifies goods and/or services in more than one international class; therefore, applicant must satisfy all the requirements below for each international class based on Trademark Act Sections 1(b) and 44:

 

(1)       List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class.

 

(2)       Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule).  The application identifies goods and/or services that are classified in at least 2 classes; however, applicant submitted a fee(s) sufficient for only 1 class(es).  Applicant must either submit the filing fees for the classes not covered by the submitted fees or restrict the application to the number of classes covered by the fees already paid.

 

See 15 U.S.C. §§1051(b), 1112, 1126(e); 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(2)-(3), 2.86(a); TMEP §§1403.01, 1403.02(c).

 

See an overview of the requirements for a Sections 1(b) and 44 multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.

 

 

Foreign Registration Required

 

The application specifies both an intent to use basis under Trademark Act Section 1(b) and a claim of priority under Section 44(d) based on a foreign application.  See 15 U.S.C. §§1051(b), 1126(d); 37 C.F.R. §2.34(a)(2), (a)(4).  However, no copy of a foreign registration has been provided even though the application indicates applicant’s intent to rely on Section 44(e) as an additional basis for registration.  See 15 U.S.C. §1126(e).

 

An application with a Section 44(e) basis must include a true copy, photocopy, certification, or certified copy of a foreign registration from an applicant’s country of origin.  15 U.S.C. §1126(e); 37 C.F.R. §2.34(a)(3)(ii); TMEP §§1004, 1004.01, 1016.  In addition, an applicant’s country of origin must be a party to a convention or treaty relating to trademarks to which the United States is also a party, or must extend reciprocal registration rights to nationals of the United States by law.  15 U.S.C. §1126(b); TMEP §§1002.01, 1004.

 

Therefore, applicant must provide a copy of the foreign registration from applicant’s country of origin when it becomes available.  TMEP §1003.04(a).  A copy of a foreign registration must consist of a document issued to an applicant by, or certified by, the intellectual property office in applicant’s country of origin.  TMEP §1004.01.  If applicant’s country of origin does not issue registrations or Madrid Protocol certificates of extension of protection, applicant may submit a copy of the Madrid Protocol international registration that shows that protection of the international registration has been extended to applicant’s country of origin.  TMEP §1016.  In addition, applicant must also provide an English translation if the foreign registration is not written in English.  37 C.F.R. §2.34(a)(3)(ii); TMEP §1004.01(a)-(b).  The translation should be signed by the translator.  TMEP §1004.01(b).

 

If the foreign registration has not yet issued, or applicant requires additional time to procure a copy of the foreign registration (and English translation, as appropriate), applicant should so inform the trademark examining attorney and request that the U.S. application be suspended until a copy of the foreign registration is available.  TMEP §§716.02(b), 1003.04(b).

 

If applicant cannot satisfy the requirements of a Section 44(e) basis, applicant may request that the mark be approved for publication based solely on the Section 1(b) basis.  See 15 U.S.C. §§1051(b), 1126(e); 37 C.F.R. §2.35(b)(1); TMEP §§806.02(f), 806.04(b), 1003.04(b).  Although the mark may be approved for publication on the Section 1(b) basis, it will not register until an acceptable allegation of use has been filed.  See 15 U.S.C. §1051(c)-(d); 37 C.F.R. §§2.76, 2.88; TMEP §1103.  Please note that, if the U.S. application satisfied the requirements of Section 44(d) as of the U.S. application filing date, applicant may retain the priority filing date under Section 44(d) without perfecting the Section 44(e) basis, provided there is a continuing valid basis for registration.  See 37 C.F.R. §2.35(b)(3)-(4); TMEP §§806.02(f), 806.04(b). 

 

Alternatively, applicant has the option to amend the application to rely solely on the Section 44(e) basis and request deletion of the Section 1(b) basis.  See 37 C.F.R. §2.35(b)(1); TMEP §806.04.  The foreign registration alone may serve as the basis for obtaining a U.S. registration.  See 37 C.F.R. §2.34(a)(3); TMEP §806.01(d).

 

 

 

Response Guidelines

 

For this application to proceed, applicant must explicitly address each refusal and/or requirement in this Office action.  For a refusal, applicant may provide written arguments and evidence against the refusal, and may have other response options if specified above.  For a requirement, applicant should set forth the changes or statements.  Please see “Responding to Office Actions” and the informational video “Response to Office Action” for more information and tips on responding.

 

Applicant should include the following information on all correspondence with the Office:  (1) the name and law office number of the trademark examining attorney, (2) the serial number and filing date of the application, (3) the date of issuance of this Office action, (4) applicant’s name, address, telephone number and e-mail address (if applicable), and (5) the mark.  37 C.F.R. §2.194(b)(1); TMEP §302.03(a).

 

If applicant has questions regarding this Office action, please telephone the assigned trademark examining attorney.  All relevant e-mail communications will be placed in the official application record; however, an e-mail communication will not be accepted as a response to this Office action and will not extend the deadline for filing a proper response.  See 37 C.F.R. §2.191; TMEP §§304.01-.02, 709.04-.05.  Further, although the trademark examining attorney may provide additional explanation pertaining to the refusal(s) and/or requirement(s) in this Office action, the trademark examining attorney may not provide legal advice or statements about applicant’s rights.  See TMEP §§705.02, 709.06.  Any arguments regarding the content of this Office action should be made in writing, as those discussions should be of record.

 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

How to respond.  Click to file a response to this nonfinal Office action  

 

 

/Tracy Whittaker-Brown, Esq./

Examining Attorney, Law Office 111

U.S. Patent & Trademark Office

Tracy.Whittaker-Brown@uspto

571-272-9397

 

 

RESPONSE GUIDANCE

• Missing the response deadline to this letter will cause the application to abandon.  A response or notice of appeal must be received by the USPTO before midnight Eastern Time of the last day of the response period.  TEAS and ESTTA maintenance or unforeseen circumstances could affect an applicant’s ability to timely respond.  

 

• Responses signed by an unauthorized party are not accepted and can cause the application to abandon.  If applicant does not have an attorney, the response must be signed by the individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant.  If applicant has an attorney, the response must be signed by the attorney.

 

• If needed, find contact information for the supervisor of the office or unit listed in the signature block.

 

United States Patent and Trademark Office (USPTO)

 

USPTO OFFICIAL NOTICE

 

Office Action (Official Letter) has issued

on September 18, 2019 for

U.S. Trademark Application Serial No. 88486681

 

Your trademark application has been reviewed by a trademark examining attorney.  As part of that review, the assigned attorney has issued an official letter that you must respond to by the specified deadline or your application will be abandoned.  Please follow the steps below.

 

(1)  Read the official letter.

 

(2)  Direct questions about the contents of the Office action to the assigned attorney below. 

 

 

/Tracy Whittaker-Brown, Esq./

Examining Attorney, Law Office 111

U.S. Patent & Trademark Office

Tracy.Whittaker-Brown@uspto

571-272-9397

 

Direct questions about navigating USPTO electronic forms, the USPTO website, the application process, the status of your application, and/or whether there are outstanding deadlines or documents related to your file to the Trademark Assistance Center (TAC).

 

(3)  Respond within 6 months (or earlier, if required in the Office action) from September 18, 2019, using the Trademark Electronic Application System (TEAS).  The response must be received by the USPTO before midnight Eastern Time of the last day of the response period.  See the Office action for more information about how to respond.

 

 

 

GENERAL GUIDANCE

·       Check the status of your application periodically in the Trademark Status & Document Retrieval (TSDR) database to avoid missing critical deadlines.

 

·       Update your correspondence email address, if needed, to ensure you receive important USPTO notices about your application.

 

·       Beware of misleading notices sent by private companies about your application.  Private companies not associated with the USPTO use public information available in trademark registrations to mail and email trademark-related offers and notices – most of which require fees.  All official USPTO correspondence will only be emailed from the domain “@uspto.gov.”