Mark For: LAIRD PERFORMANCE MATERIALS™ trademark registration is intended to cover the categories of microwave absorbers, namely, pastes, pads, gels, and molded and extruded shapes, comprised of foams, elastomers, and polymers loaded with magnetic particles; conductive materials, namely, fabric over foam contacts, foil over foam contacts, spring contacts, and surface mount device contacts for providing an electrical connection between two surfaces in electronic devices; dielectric materials, namely, conducting and protective interlayer conductive materials and coatings for use in integrated circuits, semiconductor devices, computer disk drives, and other computer hardware; conductive foam, namely, sheets, pads, strips, and die-cut shapes, for use in conducting heat and electricity; surface gasket in the nature of fabric over foam gaskets, synthetic elastomer gaskets; conductive tapes, namely, conductive tape for electromagnetic radiation shielding in electronic products; decorative electromagnetic interference (EMI) shielding metals, namely, conductive metal sheets having a decorative finish thereon, for EMI shielding in electronics; structural electromagnetic interference (EMI) shielding metals, namely, in the form of metal board level shields; electromagnetic interference (EMI) shielding products, namely, electromagnetic interference (EMI) shielding contacts, electromagnetic interference (EMI) spring contacts, electromagnetic interference (EMI) shielding user interface shields, electromagnetic interference (EMI) combination shields, electromagnetic interference (EMI) shielding gaskets, electromagnetic interference (EMI) board level shielding and customer designed electromagnetic interference (EMI) shielding; electromagnetic interference shielding gaskets, namely, electromagnetic interference (EMI) fabric over foam gaskets and electromagnetic interference (EMI) fingerstocks; electromagnetic interference (EMI) spring contacts; conductive elastomers, namely, synthetic elastomers in the form of pads, or as molded, die cut or extruded shapes, for use as components in electronics, and putties, greases, pads, and sheets for use in the management of electromagnetic radiation and heat in electronic devices; form-in place gaskets, namely, form-in-place non-metal gaskets for electronic devices; electromagnetic interference (EMI) shielding wire mesh and knitted wire, namely, in the form of gaskets; electromagnetic interference (EMI) shielding knitted gaskets; combination electromagnetic interference (EMI) shielding products, namely, EMI shielding contacts, EMI spring contacts, EMI shielding user interface shields and EMI combination shields, EMI board level shielding and customer designed EMI shielding; electromagnetic interference (EMI) vent panels, namely, metal plated rigid structures that provide EMI shielding and permit air flow to electronic components; electromagnetic interference (EMI) microwave products in the nature of plastics, elastomers, epoxies and polyurethane materials for use in absorbing electromagnetic radiation in electronic devices; electromagnetic interference (EMI) metallized fabric, namely, nylon or polyester fabric impregnated with metal cut or shaped to form an EMI shield in electronic devices; electromagnetic interference (EMI) conductive tape, namely, adhesive shielding tape for electromagnetic radiation shielding in electronic products; thermal interface materials, thermally conductive silicone gap fillers for industrial and commercial use; thermal interface materials, namely, phase change thermal interface materials; thermal gap filler pad thermal interface materials, namely, thermally conductive silicone gap fillers for industrial and commercial use; electrically insulating thermal interface materials and electrically conductive thermal interface materials, low thermal resistance interface pads, tapes, sheets, films, and coatings for use as heat transfer interfaces between electronic components and thermal dissipation members; thermally conductive printed circuit board (PCB) materials, namely, films and sheets made out of resins for use in manufacturing electronic circuit boards; thermally conductive thermoplastics, namely, semiprocesssed thermoplastics in molded, extruded, and sheet form; thermal and electrically conductive materials for use in electrical and electronic applications, namely, low thermal resistance interface pads, tapes, sheets, films, and coatings for use as heat transfer interfaces between electronic components and thermal dissipation members. [all]
Status
2020-04-11 UTC
LIVE APPLICATION Under Examination
The trademark application has been accepted by the Office (has met the minimum filing requirements) and that this application has been assigned to an examiner.
TMEG LAW OFFICE 101 - EXAMINING ATTORNEY ASSIGNED 2020-04-09
Basis
1(b)
Class Status
ACTIVE
Primary US Classes
001:
Raw or Partly Prepared Materials
005:
Adhesives
012:
Construction Materials
013:
Hardware, Plumbing and Steamfitting Supplies
035:
Belting, Hose, Machinery Packing and Non-Metallic Tires
050:
Merchandise Not Otherwise Classified
Primary International Class
017 - Primary Class
(Rubber goods) Rubber, gutta-percha, gum, asbestos, mica and goods made from these materials and not included in other classes; plastics in extruded form for use in manufacture; packing, stopping and insulating materials; flexible pipes, not of metal.
Filed Use
No
Current Use
No
Intent To Use
Yes
Filed ITU
Yes
44D Filed
No
44E Current
No
66A Current
No
Current Basis
No
No Basis
No
Attorney Name
Joseph E. Walsh, Jr.
Attorney Docket Number
9062-200601
Law Office Assigned
L10
Employee Name
FALK, ERIN M
Timeline
2019-06-13
Application Filed
2019-09-26
Location: TMEG LAW OFFICE 101 - EXAMINING ATTORNEY ASSIGNED
2019-09-26
Status: Live/Pending
2019-10-04
Transaction Date
2020-04-09
Location: TMEG LAW OFFICE 101 - EXAMINING ATTORNEY ASSIGNED
2020-04-09
Status: A non-final Office action has been sent (issued) to the applicant. This is a letter from the examining attorney requiring additi
JOSEPH E. WALSH, JR. HARNESS, DICKEY & PIERCE, PLC 7700 BONHOMME AVE, SUITE 400 ST. LOUIS, MO 63105
Good, Services, and Codes
IC 017. US 001 005 012 013 035 050. G & S: Microwave absorbers, namely, pastes, pads, gels, and molded and extruded shapes, comprised of foams, elastomers, and polymers loaded with magnetic particles; conductive materials, namely, fabric over foam contacts, foil over foam contacts, spring contacts, and surface mount device contacts for providing an electrical connection between two surfaces in electronic devices; dielectric materials, namely, conducting and protective interlayer conductive materials and coatings for use in integrated circuits, semiconductor devices, computer disk drives, and other computer hardware; conductive foam, namely, sheets, pads, strips, and die-cut shapes, for use in conducting heat and electricity; surface gasket in the nature of fabric over foam gaskets, synthetic elastomer gaskets; conductive tapes, namely, conductive tape for electromagnetic radiation shielding in electronic products; decorative electromagnetic interference (EMI) shielding metals, namely, conductive metal sheets having a decorative finish thereon, for EMI shielding in electronics; structural electromagnetic interference (EMI) shielding metals, namely, in the form of metal board level shields; electromagnetic interference (EMI) shielding products, namely, electromagnetic interference (EMI) shielding contacts, electromagnetic interference (EMI) spring contacts, electromagnetic interference (EMI) shielding user interface shields, electromagnetic interference (EMI) combination shields, electromagnetic interference (EMI) shielding gaskets, electromagnetic interference (EMI) board level shielding and customer designed electromagnetic interference (EMI) shielding; electromagnetic interference shielding gaskets, namely, electromagnetic interference (EMI) fabric over foam gaskets and electromagnetic interference (EMI) fingerstocks; electromagnetic interference (EMI) spring contacts; conductive elastomers, namely, synthetic elastomers in the form of pads, or as molded, die cut or extruded shapes, for use as components in electronics, and putties, greases, pads, and sheets for use in the management of electromagnetic radiation and heat in electronic devices; form-in place gaskets, namely, form-in-place non-metal gaskets for electronic devices; electromagnetic interference (EMI) shielding wire mesh and knitted wire, namely, in the form of gaskets; electromagnetic interference (EMI) shielding knitted gaskets; combination electromagnetic interference (EMI) shielding products, namely, EMI shielding contacts, EMI spring contacts, EMI shielding user interface shields and EMI combination shields, EMI board level shielding and customer designed EMI shielding; electromagnetic interference (EMI) vent panels, namely, metal plated rigid structures that provide EMI shielding and permit air flow to electronic components; electromagnetic interference (EMI) microwave products in the nature of plastics, elastomers, epoxies and polyurethane materials for use in absorbing electromagnetic radiation in electronic devices; electromagnetic interference (EMI) metallized fabric, namely, nylon or polyester fabric impregnated with metal cut or shaped to form an EMI shield in electronic devices; electromagnetic interference (EMI) conductive tape, namely, adhesive shielding tape for electromagnetic radiation shielding in electronic products; thermal interface materials, thermally conductive silicone gap fillers for industrial and commercial use; thermal interface materials, namely, phase change thermal interface materials; thermal gap filler pad thermal interface materials, namely, thermally conductive silicone gap fillers for industrial and commercial use; electrically insulating thermal interface materials and electrically conductive thermal interface materials, low thermal resistance interface pads, tapes, sheets, films, and coatings for use as heat transfer interfaces between electronic components and thermal dissipation members; thermally conductive printed circuit board (PCB) materials, namely, films and sheets made out of resins for use in manufacturing electronic circuit boards; thermally conductive thermoplastics, namely, semiprocesssed thermoplastics in molded, extruded, and sheet form; thermal and electrically conductive materials for use in electrical and electronic applications, namely, low thermal resistance interface pads, tapes, sheets, films, and coatings for use as heat transfer interfaces between electronic components and thermal dissipation members
NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM
2019-06-26
NEW APPLICATION ENTERED IN TRAM
2019-06-17
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.