Mark For: G&W® trademark registration is intended to cover the categories of
Research |
![]() ![]() ![]() ![]() ![]() |
Serial Number | 88456222 |
Registration Number | 5931982 |
Mark Literal Elements | G&W |
Mark Drawing Type | 4 - STANDARD CHARACTER MARK |
Mark Type | TRADEMARK |
Register | PRINCIPAL |
Current Location | PUBLICATION AND ISSUE SECTION 2019-12-10 |
Basis | 1(a) |
Class Status | ACTIVE |
Primary US Classes |
|
Primary International Class |
|
Filed Use | Yes |
Current Use | Yes |
Intent To Use | No |
Filed ITU | No |
44D Filed | No |
44E Current | No |
66A Current | No |
Current Basis | No |
No Basis | No |
Attorney Name | Martin L. Stern |
Attorney Docket Number | 201376-9036 |
Law Office Assigned | L40 |
Employee Name | CHADAB, SETH WILLIG |
1909-05-15 | Date of First Use |
1909-05-15 | Date of Use In Commerce |
2019-06-02 | Application Filed |
2019-09-24 | Published |
2019-09-24 | Published for Opposition |
2019-12-10 | Location: PUBLICATION AND ISSUE SECTION |
2019-12-10 | Status: Live/Registered |
2019-12-10 | Status: Registered. The registration date is used to determine when post-registration maintenance documents are due. |
2019-12-10 | Trademark Registered |
2019-12-10 | Transaction Date |
Party: | ![]() |
Address | 305 W. Crossroads Parkway Bolingbrook, ILLINOIS UNITED STATES 60440 |
Legal Entity Type | Corporation |
Legal Entity State | ILLINOIS |
Party: | ![]() |
Address | 305 W. Crossroads Parkway Bolingbrook IL 60440 |
Legal Entity Type | |
Legal Entity State | IL |
![]() | IMAGE/JPEG | 2019-06-02 |
![]() | JPEG | 2019-06-02 |
![]() | MULTI | 2019-06-02 |
![]() | XML | 2019-08-22 |
![]() | XML | 2019-08-22 |
![]() | APPLICATION/XML,IMAGE/JPEG | 2019-08-23 |
![]() | XML | 2019-09-04 |
![]() | XML | 2019-09-04 |
![]() | APPLICATION/XML | 2019-09-24 |
![]() | 2019-12-10 |
IC 009. US 021 023 026 036 038. G & S: Power cable terminations and joints, namely, pre-molded terminations and joints for use on transmission and distribution solid dielectric cable systems and oil-impregnated terminations and joints for use on high pressure fluid filled and self-contained fluid filled cable systems; cable splice boxes; splicing kits primarily comprised of lead sleeve, Novoid compound, dry cotton tape, saturated flax twine, solder, stearine candle, varnished cambric tapes, paper pasters, tinned shielding braid, split tinned solder copper connectors, saturated webbing and compression connectors; SF6 insulated electrical switches; solid dielectric switches; vacuum switches, namely, switches and switch gear used in transmission and distribution of electrical power; automatic transfer switches and sectionalizers for use in connection with electrical distribution and transmission systems; current limiting protectors, namely, triggered current limiters, commutating current limiters, high current limiters and encapsulated current limiting fuses; single and three phase reclosers, namely, electric circuit breakers to reclose interrupted electrical circuits; and microprocessor-based power management systems comprised of power distribution switchgear with protective electric relays for controlling automatic switching operations in overhead and underground radial and loop distribution circuits; custom designed electrical controls; automatic circuit reclosers; solid dielectric reclosers; current interrupting switches; electronic fuses; circuit breakers; manual or automated load break switches; sectionalizers; paralleling devices; intertie devices; tie point devices; transmission and distribution automation solutions; voltage sensors; voltage metering system comprised of one or more of the following components, namely, voltage sensors, mounting frame, junction box, electric cable and harness, electronic meter, lightning arrestors; remote terminal units, gateway routers and data concentrators; electronic monitors and monitor modules for monitoring electric current and electrical signals; current protection controls; electrical conductor entrance fittings, namely, bushings for connecting power conductors through a grounded wall, and parts therefor; electrical equipment enclosures and enclosure assemblies, namely, electrical power distribution enclosure units; circuit opening devices for electrical circuits, namely, fuses, and parts therefor, for interrupting electrical currents; electrical power current-carrying cable terminators and connectors. FIRST USE: 19090515. FIRST USE IN COMMERCE: 19090515
International Codes: | 9 |
U.S. Codes: | 021,023,026,036,038 |
Type Code | Type |
---|---|
GS0091 | Power cable terminations and joints, namely, pre-molded terminations and joints for use on transmission and distribution solid dielectric cable systems and oil-impregnated terminations and joints for use on high pressure fluid filled and self-contained fluid filled cable systems; cable splice boxes; splicing kits primarily comprised of lead sleeve, Novoid compound, dry cotton tape, saturated flax twine, solder, stearine candle, varnished cambric tapes, paper pasters, tinned shielding braid, split tinned solder copper connectors, saturated webbing and compression connectors; SF6 insulated electrical switches; solid dielectric switches; vacuum switches, namely, switches and switch gear used in transmission and distribution of electrical power; automatic transfer switches and sectionalizers for use in connection with electrical distribution and transmission systems; current limiting protectors, namely, triggered current limiters, commutating current limiters, high current limiters and encapsulated current limiting fuses; single and three phase reclosers, namely, electric circuit breakers to reclose interrupted electrical circuits; and microprocessor-based power management systems comprised of power distribution switchgear with protective electric relays for controlling automatic switching operations in overhead and underground radial and loop distribution circuits; custom designed electrical controls; automatic circuit reclosers; solid dielectric reclosers; current interrupting switches; electronic fuses; circuit breakers; manual or automated load break switches; sectionalizers; paralleling devices; intertie devices; tie point devices; transmission and distribution automation solutions; voltage sensors; voltage metering system comprised of one or more of the following components, namely, voltage sensors, mounting frame, junction box, electric cable and harness, electronic meter, lightning arrestors; remote terminal units, gateway routers and data concentrators; electronic monitors and monitor modules for monitoring electric current and electrical signals; current protection controls; electrical conductor entrance fittings, namely, bushings for connecting power conductors through a grounded wall, and parts therefor; electrical equipment enclosures and enclosure assemblies, namely, electrical power distribution enclosure units; circuit opening devices for electrical circuits, namely, fuses, and parts therefor, for interrupting electrical currents; electrical power current-carrying cable terminators and connectors |
GS0091 | Power cable terminations and joints, namely, pre-molded terminations and joints for use on transmission and distribution solid dielectric cable systems and oil-impregnated terminations and joints for use on high pressure fluid filled and self-contained fluid filled cable systems; cable splice boxes; splicing kits primarily comprised of lead sleeve, Novoid compound, dry cotton tape, saturated flax twine, solder, stearine candle, varnished cambric tapes, paper pasters, tinned shielding braid, split tinned solder copper connectors, saturated webbing and compression connectors; SF6 insulated electrical switches; solid dielectric switches; vacuum switches, namely, switches and switch gear used in transmission and distribution of electrical power; automatic transfer switches and sectionalizers for use in connection with electrical distribution and transmission systems; current limiting protectors, namely, triggered current limiters, commutating current limiters, high current limiters and encapsulated current limiting fuses; single and three phase reclosers, namely, electric circuit breakers to reclose interrupted electrical circuits; and microprocessor-based power management systems comprised of power distribution switchgear with protective electric relays for controlling automatic switching operations in overhead and underground radial and loop distribution circuits; custom designed electrical controls; automatic circuit reclosers; solid dielectric reclosers; current interrupting switches; electronic fuses; circuit breakers; manual or automated load break switches; sectionalizers; paralleling devices; intertie devices; tie point devices; transmission and distribution automation solutions; voltage sensors; voltage metering system comprised of one or more of the following components, namely, voltage sensors, mounting frame, junction box, electric cable and harness, electronic meter, lightning arrestors; remote terminal units, gateway routers and data concentrators; electronic monitors and monitor modules for monitoring electric current and electrical signals; current protection controls; electrical conductor entrance fittings, namely, bushings for connecting power conductors through a grounded wall, and parts therefor; electrical equipment enclosures and enclosure assemblies, namely, electrical power distribution enclosure units; circuit opening devices for electrical circuits, namely, fuses, and parts therefor, for interrupting electrical currents; electrical power current-carrying cable terminators and connectors |
Description | Date | Proceeding Number |
---|---|---|
REGISTERED-PRINCIPAL REGISTER | 2019-12-10 | |
PUBLISHED FOR OPPOSITION | 2019-09-24 | |
OFFICIAL GAZETTE PUBLICATION CONFIRMATION E-MAILED | 2019-09-24 | |
NOTIFICATION OF NOTICE OF PUBLICATION E-MAILED | 2019-09-04 | |
ASSIGNED TO EXAMINER | 2019-08-22 | 92449 |
APPROVED FOR PUB - PRINCIPAL REGISTER | 2019-08-22 | |
NEW APPLICATION OFFICE SUPPLIED DATA ENTERED IN TRAM | 2019-06-17 | |
NEW APPLICATION ENTERED IN TRAM | 2019-06-05 |
uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.
While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.
All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.