To: | New Millennium Communications, LLC (steve@braggfinancial.com) |
Subject: | U.S. Trademark Application Serial No. 88414190 - INLIGHTEN - N/A |
Sent: | July 23, 2019 09:18:14 PM |
Sent As: | ecom104@uspto.gov |
Attachments: |
United States Patent and Trademark Office (USPTO)
Office Action (Official Letter) About Applicant’s Trademark Application
U.S. Application Serial No. 88414190
Mark: INLIGHTEN
|
|
Correspondence Address: NEW MILLENNIUM COMMUNICATIONS, LLC |
|
Applicant: New Millennium Communications, LLC
|
|
Reference/Docket No. N/A
Correspondence Email Address: |
|
The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned. Respond using the Trademark Electronic Application System (TEAS). A link to the appropriate TEAS response form appears at the end of this Office action.
Issue date: July 23, 2019
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issues below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SEARCH OF OFFICE’S DATABASE OF MARKS
The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).
Although no conflicting marks that would bar registration under Trademark Act Section 2(d) have been found, applicant must respond to the refusal and requirements set forth below.
Specimen Refusal – Mark Differs on Drawing and Specimen
Registration is refused because the specimen does not show the mark in the drawing in use in commerce in International Class 38, which is required in the application or amendment to allege use. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a), 1301.04(g)(i). The mark appearing on the specimen and in the drawing must match; that is, the mark in the drawing “must be a substantially exact representation of the mark” on the specimen. See 37 C.F.R. §2.51(a)-(b); TMEP §807.12(a).
In this case, the specimen displays the mark as the stylized term InLighten with the letters “In” and “en” written in white and the letters “Light” written in yellow, with a yellow isosceles triangle dotting the “i” and a yellow cross slightly larger than the lettering forming the “t”, there is a yellow arch rising above the “n” and terminating above the “e”. However, the drawing displays the mark as the stylized term InLighten with the letters “In” and “en” written in black and the letters “Light” written in yellow, with a yellow isosceles triangle dotting the “i” and a yellow cross slightly larger than the lettering forming the “t”, there is a yellow arch rising above the “n” and terminating above the “e”. The mark on the specimen does not match the mark in the drawing because the first two letters and the last two letters differs in color. Applicant has thus failed to provide the required evidence of use of the mark in commerce. See TMEP §807.12(a).
Applicant may respond to this refusal by satisfying one of the following:
(1) Submit a new drawing of the mark that shows the mark on the specimen and, if appropriate, an amendment of the description and/or color claim that agrees with the new drawing. See 37 C.F.R. §2.72(a)-(b). The following amended description is suggested, if accurate: “The mark consists of the stylized term InLighten with the letters “In” and “en” written in white and the letters “Light” written in yellow, with a yellow isosceles triangle dotting the “i” and a yellow cross slightly larger than the lettering forming the “t”, there is a yellow arch rising above the “n” and terminating above the “e”. The black background is a feature of the mark. Applicant may amend the mark in the drawing to match the mark on the specimen but may not make any other changes or amendments that would materially alter the drawing of the mark. See 37 C.F.R. §2.72(a)-(b); TMEP §807.14.
(2) Submit a different specimen (a verified “substitute” specimen) for each applicable international class that (a) shows the mark in the drawing in actual use in commerce for the goods and/or services in the application or amendment to allege use, and (b) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use.
Examples of specimens for services include advertising and marketing materials, brochures, photographs of business signage and billboards, and webpages that show the mark used in the actual sale, rendering, or advertising of the services. See TMEP §1301.04(a), (h)(iv)(C).
For more information about drawings and instructions on how to satisfy these response options online using the Trademark Electronic Application System (TEAS) form, see the Drawing webpage.
MARK DESCRIPTION INCOMPLETE – does NOT REFERENCE the COLOR OF ALL ELEMENTS
A complete description must identify all the literal and design elements in the mark and specify where the colors appear in those elements. See 37 C.F.R. §§2.37, 2.52(b)(1); TMEP §§807.07(a) et seq. Specifically, the mark description does not specify that the arch is yellow. If black, white, and/or gray are not being claimed as a color feature of the mark, applicant must exclude them from the color claim and include in the description a statement that black, white, and/or gray represent background, outlining, shading, and/or transparent areas and are not part of the mark. See TMEP §807.07(d).
The following description is suggested, if accurate:
The mark consists of the stylized term InLighten with the letters “In” and “en” written in black and the letters “Light” written in yellow, with a yellow isosceles triangle dotting the “i” and a yellow cross slightly larger than the lettering forming the “t”, there is a yellow arch rising above the “n” and terminating above the “e”. The white background is a feature the mark.
Color Drawing Disagrees with Color Claim and Mark Description
Where the color claim and/or description of the mark and drawing are inconsistent with one another, generally the USPTO looks to the drawing to determine what the mark is. TMEP §807.07(a)(i)-(a)(ii), (c). Additionally, the colors in the drawing, color claim, and description must match. See 37 C.F.R. §2.52(b)(1); TMEP §§807.07 et seq.
To clarify the colors in the mark, applicant may satisfy one of the following:
(1) Submit a new color drawing that shows the mark in the colors specified in the color claim. TMEP §807.07(c). However, any other amendments to the drawing will not be accepted if they would materially alter the mark. 37 C.F.R. §2.72; see TMEP §§807.07(c), 807.14 et seq.
(2) Submit an amended color claim and description that matches the colors in the drawing. Generic color names must be used to describe the colors in the mark, e.g., red, yellow, blue. TMEP §807.07(a)(i)-(ii). If black, white, and/or gray represent background, outlining, shading, and/or transparent areas and are not part of the mark, applicant must so specify in the description. See TMEP §807.07(d).
The following color claim and description are suggested:
Color claim: “The colors white, black and yellow are claimed as a feature of the mark.”
Description: “The mark consists of the following: The mark consists of the stylized term InLighten with the letters “In” and “en” written in black and the letters “Light” written in yellow, with a yellow isosceles triangle dotting the “i” and a yellow cross slightly larger than the lettering forming the “t”, there is a yellow arch rising above the “n” and terminating above the “e”. The white background is a feature the mark.”
For more information about drawings and instructions on how to submit a new color drawing, amended color claim and/or description online using the Trademark Electronic Application System (TEAS) form, see the Drawing webpage.
ASSISTANCE
For this application to proceed, applicant must explicitly address each refusal and/or requirement in this Office action. For a refusal, applicant may provide written arguments and evidence against the refusal, and may have other response options if specified above. For a requirement, applicant should set forth the changes or statements. Please see “Responding to Office Actions” and the informational video “Response to Office Action” for more information and tips on responding.
To expedite prosecution of the application, applicant is encouraged to file its response to this Office action online via the Trademark Electronic Application System (TEAS), which is available at http://www.gov.uspto.report/trademarks/teas/index.jsp. If applicant has technical questions about the TEAS response to Office action form, applicant can review the electronic filing tips available online at http://www.gov.uspto.report/trademarks/teas/e_filing_tips.jsp and e-mail technical questions to TEAS@uspto.gov.
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
How to respond. Click to file a response to this nonfinal Office action
/Donald Johnson/
Examining Attorney
Law Office 104
571-272-7831
don.johnson@uspto.gov
RESPONSE GUIDANCE