Offc Action Outgoing

ARITA

Unimech Flow Inc.

U.S. Trademark Application Serial No. 88403158 - ARITA - N/A

To: Unimech Flow Inc. (bryan.lim@unimechflow.com)
Subject: U.S. Trademark Application Serial No. 88403158 - ARITA - N/A
Sent: July 25, 2019 10:24:22 AM
Sent As: ecom103@uspto.gov
Attachments:

United States Patent and Trademark Office (USPTO)

Office Action (Official Letter) About Applicant’s Trademark Application

 

U.S. Application Serial No. 88403158

 

Mark:  ARITA

 

 

 

 

Correspondence Address: 

LIM SHI XIONG

UNIMECH FLOW INC.

7075 FM 1960 RD W SUITE 16

HOUSTON, TX 77069

 

 

 

Applicant:  Unimech Flow Inc.

 

 

 

Reference/Docket No. N/A

 

Correspondence Email Address: 

 bryan.lim@unimechflow.com

 

 

 

FINAL OFFICE ACTION

 

The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned.  Respond using the Trademark Electronic Application System (TEAS) and/or Electronic System for Trademark Trials and Appeals (ESTTA).  A link to the appropriate TEAS response form and/or to ESTTA for an appeal appears at the end of this Office action. 

 

Issue date:  July 25, 2019

 

 

INTRODUCTION

 

This Office action is in response to applicant’s communication filed on 7/23/2019.

 

In a previous Office action(s) dated 7/11/2019, the trademark examining attorney refused registration of the applied-for mark based on the following:  failure to show the applied-for mark in use in commerce with any of the specified goods.  In addition, applicant was required to satisfy the following requirement:  amend the identification of goods.

 

The trademark examining attorney maintains and now makes FINAL the refusal(s) and/or requirement(s) in the summary of issues below.  See 37 C.F.R. §2.63(b); TMEP §714.04.

 

SUMMARY OF ISSUES MADE FINAL that applicant must address:

 

  • Specimen requirement made final – Class 6
  • Identification of goods requirement made final – Class 11

 

 

SPECIMEN REFUSAL MADE FINAL

 

The requirement for a proper specimen for Class 6 is now made FINAL for the reasons set forth below.  Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a); 37 C.F.R. §2.63(b).

 

Registration was refused because the specimen was advertising and did not show the applied-for mark in use in commerce.  Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). 

 

In response, applicant has submitted numerous substitute specimens.  While these specimens extensively show the mark used on Class 11 goods, none of them show the mark used on valves for oil and gas.  All of the specimens are fire control valves, i.e. valves for water/plumbing.  A proper specimen must show the mark used on valves for oil or gas.  As such, the specimen is made FINAL with regard to Class 6.

 

An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark in use in commerce for each international class of goods or services identified in the application or amendment to allege use.  15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). 

 

Examples of specimens for goods include tags, labels, instruction manuals, containers, photographs that show the mark on the actual goods or packaging, and displays associated with the actual goods at their point of sale.  See TMEP §§904.03 et seq.  Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods.  TMEP §904.03(i).  However, leaflets, handbills, advertising circulars, and other advertising materials generally are not acceptable specimens for goods.  See TMEP §§904.03 et seq.

 

Applicant may respond to this refusal by satisfying one of the following for each applicable international class:

 

(1)        Submit a different specimen (a verified “substitute” specimen) that (a) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use and (b) shows the mark in actual use in commerce for the services identified in the application or amendment to allege use.  A “verified substitute specimen” is a specimen that is accompanied by the following statement made in a signed affidavit or supported by a declaration under 37 C.F.R. §2.20:  “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce at least as early as the filing date of the application or prior to the filing of the amendment to allege use.”  The substitute specimen cannot be accepted without this statement.

 

(2)        Amend the filing basis to intent to use under Section 1(b), for which no specimen is required.  This option will later necessitate additional fee(s) and filing requirements such as providing a specimen.

 

For an overview of both response options referenced above and instructions on how to satisfy either option online using the Trademark Electronic Application System (TEAS) form, please go to http://www.gov.uspto.report/trademarks/law/specimen.jsp.

 

 

IDENTIFICATION OF GOODS REQUIREMENT MADE FINAL

 

The requirement to amend the identification of goods is now made FINAL with regard to Class 11.  See 37 C.F.R. §2.63(b).  In the previous office action, the examining attorney required the applicant to amend the identification of goods because as written, it was indefinite and overly broad.  See TMEP §1402.01. 

 

Applicant was also cautioned that its goods may be clarified or limited, but may not be expanded beyond those originally itemized in the U.S. application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.

 

In response, applicant has added “valves for air conditioning” to the identification of goods in Class 11.  The identification of goods as filed made no mention of valves for air conditioning, only “manually operated and actuated metal valves” and “valves used for water, oil, steam and gas.”  Valves for air conditioning are clearly not “valves used for water, oil, steam and gas,” however, if applicant’s air conditioning valves are manually operated and actuated metal valves, then applicant may add that qualifying wording.  Otherwise “valves for air conditioning” must be deleted as beyond the scope of the identification of goods as listed in the original application.

 

Applicant may adopt the following identification, if accurate: 

 

steam valves; manually-operated plumbing valves; MANUALLY OPERATED AND ACTUATED METAL valves for air conditioning (Class 11).

 

Applicant’s goods and/or services may be clarified or limited, but may not be expanded beyond those originally itemized in the application or as acceptably narrowed.  See 37 C.F.R. §2.71(a); TMEP §§1402.06, 1904.02(c)(iv).  Applicant may clarify or limit the identification by inserting qualifying language or deleting items to result in a more specific identification; however, applicant may not substitute different goods and/or services or add goods and/or services not found or encompassed by those in the original application or as acceptably narrowed.  See TMEP §1402.06(a)-(b).  The scope of the goods and/or services sets the outer limit for any changes to the identification and is generally determined by the ordinary meaning of the wording in the identification.  TMEP §§1402.06(b), 1402.07(a)-(b). Any acceptable changes to the goods and/or services will further limit scope, and once goods and/or services are deleted, they are not permitted to be reinserted.  TMEP §1402.07(e).  Additionally, for applications filed under Trademark Act Section 66(a), the scope of the identification for purposes of permissible amendments is limited by the international class assigned by the International Bureau of the World Intellectual Property Organization (International Bureau).  37 C.F.R. §2.85(f); TMEP §§1402.07(a), 1904.02(c).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

 

PROPER RESPONSE TO FINAL ACTION - SUBSTANTIVE REFUSAL OR REQUIREMENT

 

If applicant does not respond within six months of the mailing date of this final Office action, the application will be abandoned.  15 U.S.C. §1062(b); 37 C.F.R. §2.65(a).  Applicant may respond to this final Office action by: 

 

(1)     Submitting a response that fully satisfies all outstanding requirements, if feasible; and/or

 

(2)     Filing an appeal to the Trademark Trial and Appeal Board, with an appeal fee of $100 per class.

 

37 C.F.R. §§2.6(a)(18), 2.64(a); TBMP ch. 1200; TMEP §714.04.

 

In certain rare circumstances, a petition to the Director may be filed pursuant to 37 C.F.R. §2.63(b)(2) to review a final Office action that is limited to procedural issues.  37 C.F.R. §2.64(a); TMEP §714.04; see 37 C.F.R. §2.146(b); TBMP §1201.05; TMEP §1704 (explaining petitionable matters).  The petition fee is $100.  37 C.F.R. §2.6(a)(15).

 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

How to respond.  Click to file a response to this final Office action and/or appeal it to the Trademark Trial and Appeal Board (TTAB).

 

 

 

/James T. Griffin/

Examining Attorney, Law Office 103

United States Patent & Trademark Office

571-272-9169

jim.griffin@uspto.gov

 

 

RESPONSE GUIDANCE

  • Missing the response deadline to this letter will cause the application to abandon.  A response or notice of appeal must be received by the USPTO before midnight Eastern Time of the last day of the response period.  TEAS and ESTTA maintenance or unforeseen circumstances could affect an applicant’s ability to timely respond.  

 

 

 

U.S. Trademark Application Serial No. 88403158 - ARITA - N/A

To: Unimech Flow Inc. (bryan.lim@unimechflow.com)
Subject: U.S. Trademark Application Serial No. 88403158 - ARITA - N/A
Sent: July 25, 2019 10:24:23 AM
Sent As: ecom103@uspto.gov
Attachments:

United States Patent and Trademark Office (USPTO)

 

USPTO OFFICIAL NOTICE

 

Office Action (Official Letter) has issued

on July 25, 2019 for

U.S. Trademark Application Serial No. 88403158

 

Your trademark application has been reviewed by a trademark examining attorney.  As part of that review, the assigned attorney has issued an official letter that you must respond to by the specified deadline or your application will be abandoned.  Please follow the steps below.

 

(1)  Read the official letter.

 

(2)  Direct questions about the contents of the Office action to the assigned attorney below. 

 

 

/James T. Griffin/

Examining Attorney, Law Office 103

United States Patent & Trademark Office

571-272-9169

jim.griffin@uspto.gov

 

Direct questions about navigating USPTO electronic forms, the USPTO website, the application process, the status of your application, and/or whether there are outstanding deadlines or documents related to your file to the Trademark Assistance Center (TAC).

 

(3)  Respond within 6 months (or earlier, if required in the Office action) from July 25, 2019, using the Trademark Electronic Application System (TEAS).  The response must be received by the USPTO before midnight Eastern Time of the last day of the response period.  See the Office action for more information about how to respond.

 

 

 

GENERAL GUIDANCE

·         Check the status of your application periodically in the Trademark Status & Document Retrieval (TSDR) database to avoid missing critical deadlines.

 

·         Update your correspondence email address, if needed, to ensure you receive important USPTO notices about your application.

 

·         Beware of misleading notices sent by private companies about your application.  Private companies not associated with the USPTO use public information available in trademark registrations to mail and email trademark-related offers and notices – most of which require fees.  All official USPTO correspondence will only be emailed from the domain “@uspto.gov.”

 

 

 


uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed