Offc Action Outgoing

ARITA

Unimech Flow Inc.

U.S. Trademark Application Serial No. 88403158 - ARITA - N/A

To: Unimech Flow Inc. (bryan.lim@unimechflow.com)
Subject: U.S. Trademark Application Serial No. 88403158 - ARITA - N/A
Sent: July 11, 2019 07:40:42 PM
Sent As: ecom103@uspto.gov
Attachments:

United States Patent and Trademark Office (USPTO)

Office Action (Official Letter) About Applicant’s Trademark Application

 

U.S. Application Serial No. 88403158

 

Mark:  ARITA

 

 

 

 

Correspondence Address: 

LIM SHI XIONG

UNIMECH FLOW INC.

7075 FM 1960 RD W SUITE 16

HOUSTON, TX 77069

 

 

 

Applicant:  Unimech Flow Inc.

 

 

 

Reference/Docket No. N/A

 

Correspondence Email Address: 

 bryan.lim@unimechflow.com

 

 

 

NONFINAL OFFICE ACTION

 

The USPTO must receive applicant’s response to this letter within six months of the issue date below or the application will be abandoned.  Respond using the Trademark Electronic Application System (TEAS).  A link to the appropriate TEAS response form appears at the end of this Office action. 

 

Issue date:  July 11, 2019

 

The assigned examining attorney has reviewed the referenced application and determined the following.

 

 

SEARCH

 

The examining attorney has searched the Office records and has found no similar registered or pending mark which would bar registration under Trademark Act Section 2(d), 15 U.S.C. §1052(d).  TMEP §704.02.

 

 

SUMMARY OF ISSUES:

 

           Specimen unacceptable

           Identification of goods indefinite/overly broad

           Requirements for adding classes

 

 

SPECIMEN UNACCEPTABLE

 

Registration is refused because the specimen appears to be mere advertising material and thus the specimen fails to show the applied-for mark in use in commerce.  Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). 

 

Specifically, applicant submitted its website home page with general information about the goods.  As such, this webpage is advertising material.  Advertising materials are generally not acceptable as specimens to show use in commerce for goods.  See In re Kohr Bros., 121 USPQ2d 1793, 1794 (TTAB 2017) (quoting In re Quantum Foods, Inc., 94 USPQ2d 1375, 1379 (TTAB 2010)); TMEP §904.04(b), (c).  Advertising materials may consist of the following:  online advertising banners appearing on search engine result pages and in social media; advertising circulars and brochures; price lists; listings in trade directories; and business cards.  See TMEP §904.04(b). 

 

An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark in use in commerce for each international class of goods identified in the application or amendment to allege use.  15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). 

 

Examples of specimens for goods include tags, labels, instruction manuals, containers, photographs that show the mark on the actual goods or packaging, and displays associated with the actual goods at their point of sale.  See TMEP §§904.03 et seq.  Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods.  TMEP §904.03(i). 

 

Applicant may respond to this refusal by satisfying one of the following for each applicable international class:

 

(1)        Submit a different specimen (a verified “substitute” specimen) that (a) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use and (b) shows the mark in actual use in commerce for the goods identified in the application or amendment to allege use.  A “verified substitute specimen” is a specimen that is accompanied by the following statement made in a signed affidavit or supported by a declaration under 37 C.F.R. §2.20:  “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce at least as early as the filing date of the application or prior to the filing of the amendment to allege use.”  The substitute specimen cannot be accepted without this statement.

 

(2)        Amend the filing basis to intent to use under Section 1(b), for which no specimen is required.  This option will later necessitate additional fee(s) and filing requirements such as providing a specimen.

 

For an overview of both response options referenced above and instructions on how to satisfy either option online using the Trademark Electronic Application System (TEAS) form, please go to the Specimen webpage.  

 

 

IDENTIFICATION OF GOODS/SERVICES

 

The identification of goods is indefinite and must be clarified as shown below.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  The USPTO has the discretion to determine the degree of particularity needed to clearly identify goods and/or services covered by a mark.  In re Fiat Grp. Mktg. & Corp. Commc’ns S.p.A, 109 USPQ2d 1593, 1597 (TTAB 2014) (citing In re Omega SA, 494 F.3d 1362, 1365, 83 USPQ2d 1541, 1543-44 (Fed. Cir. 2007)).  Accordingly, the USPTO requires the description of goods and/or services in a U.S. application to be specific, definite, clear, accurate, and concise.  TMEP §1402.01; see In re Fiat Grp. Mktg. & Corp. Commc’ns S.p.A, 109 USPQ2d at 1597-98; Cal. Spray-Chem. Corp. v. Osmose Wood Pres. Co. of Am., 102 USPQ 321, 322 (Comm’r Pats. 1954). 

 

The wording “valves used for water, oil, steam and gas; manually operated and actuated” is unacceptable because it does not indicate what the valves are made of.  While metal valves are in Class 6, valves for plumbing and heating and cooling installations are in Class 11, and rubber manually operated valves are in Class 17.  Applicant’s steam valves are in Class 11 because Class 11 includes valves for plumbing and heating and cooling installations regardless of material composition.  Applicant’s water valves would likewise be in Class 11 as plumbing fixtures.

 

Applicant may substitute the following wording, if accurate: 

 

Manually operated and actuated metal valves; metal pulleys, springs and valves (not including machine elements) [UNNECESSARY]; MANUALLY OPERATED AND ACTUATED valves used for water, oil, steam and gas; manually operated and actuated (Class 6), and/or

 

Steam valves; manually operated plumbing valves (Class 11).

 

Applicant’s goods and/or services may be clarified or limited, but may not be expanded beyond those originally itemized in the U.S. application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Applicant may clarify or limit the identification by inserting qualifying language or deleting items to result in a more specific identification; however, applicant may not substitute different goods and/or services or add goods and/or services not found in or encompassed by those in the original U.S. application or as acceptably amended.  See TMEP §1402.06(a)-(b).  The scope of the goods and/or services sets the outer limit for any changes to the identification and is generally determined by the ordinary meaning of the wording in the identification.  TMEP §§1402.06(b), 1402.07(a)-(b).  Any acceptable changes to the goods and/or services will further limit scope, and once goods and/or services are deleted, they are not permitted to be reinserted.  TMEP §1402.07(e).  Additionally, for U.S. applications filed under Trademark Act Section 44(e), the scope of the identification for purposes of permissible amendments may not exceed the scope of the goods and/or services identified in the foreign registration.  37 C.F.R. §2.32(a)(6); Marmark, Ltd. v. Nutrexpa, S.A., 12 USPQ2d 1843, 1845 (TTAB 1989) (citing In re Löwenbräu München, 175 USPQ 178, 181 (TTAB 1972)); TMEP §§1012, 1402.01(b).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

 

MULTIPLE-CLASS APPLICATION REQUIREMENTS

 

The application references goods and/or services based on use in commerce in more than one international class; therefore, applicant must satisfy all the requirements below for each international class:

 

(1)        List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class (for example, International Class 3: perfume; International Class 18: cosmetic bags sold empty).

 

(2)        Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule).  Specifically, the application identifies goods and/or services based on use in commerce that are classified in at least 2 classes; however, applicant submitted a fee(s) sufficient for only 1 class(es).  Applicant must either (a) submit the filing fees for the classes not covered by the submitted fees or (b) restrict the application to the number of classes covered by the fees already paid.

 

(3)        Submit verified dates of first use of the mark anywhere and in commerce for each international class.  See more information about verified dates of use.

 

(4)        Submit a specimen for each international class.  The current specimen is not acceptable for any international class.  See more information about specimens.

 

            Examples of specimens for goods include tags, labels, instruction manuals, containers, and photographs that show the mark on the actual goods or packaging, or displays associated with the actual goods at their point of sale.  Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods.  

 

(5)        Submit a verified statement that “The specimen was in use in commerce on or in connection with the goods and/or services listed in the application at least as early as the filing date of the application. See more information about verification.

 

See 15 U.S.C. §§1051(a), 1112; 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(1), 2.86(a); TMEP §§904, 1403.01, 1403.02(c).

 

See an overview of the requirements for a Section 1(a) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.

 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

How to respond.  Click to file a response to this nonfinal Office action  

 

 

/James T. Griffin/

Examining Attorney, Law Office 103

United States Patent & Trademark Office

571-272-9169

jim.griffin@uspto.gov

 

 

RESPONSE GUIDANCE

  • Missing the response deadline to this letter will cause the application to abandon.  A response or notice of appeal must be received by the USPTO before midnight Eastern Time of the last day of the response period.  TEAS and ESTTA maintenance or unforeseen circumstances could affect an applicant’s ability to timely respond.  

 

 

 

U.S. Trademark Application Serial No. 88403158 - ARITA - N/A

To: Unimech Flow Inc. (bryan.lim@unimechflow.com)
Subject: U.S. Trademark Application Serial No. 88403158 - ARITA - N/A
Sent: July 11, 2019 07:40:45 PM
Sent As: ecom103@uspto.gov
Attachments:

United States Patent and Trademark Office (USPTO)

 

USPTO OFFICIAL NOTICE

 

Office Action (Official Letter) has issued

on July 11, 2019 for

U.S. Trademark Application Serial No. 88403158

 

Your trademark application has been reviewed by a trademark examining attorney.  As part of that review, the assigned attorney has issued an official letter that you must respond to by the specified deadline or your application will be abandoned.  Please follow the steps below.

 

(1)  Read the official letter.

 

(2)  Direct questions about the contents of the Office action to the assigned attorney below. 

 

 

/James T. Griffin/

Examining Attorney, Law Office 103

United States Patent & Trademark Office

571-272-9169

jim.griffin@uspto.gov

 

Direct questions about navigating USPTO electronic forms, the USPTO website, the application process, the status of your application, and/or whether there are outstanding deadlines or documents related to your file to the Trademark Assistance Center (TAC).

 

(3)  Respond within 6 months (or earlier, if required in the Office action) from July 11, 2019, using the Trademark Electronic Application System (TEAS).  The response must be received by the USPTO before midnight Eastern Time of the last day of the response period.  See the Office action for more information about how to respond.

 

 

 

GENERAL GUIDANCE

·         Check the status of your application periodically in the Trademark Status & Document Retrieval (TSDR) database to avoid missing critical deadlines.

 

·         Update your correspondence email address, if needed, to ensure you receive important USPTO notices about your application.

 

·         Beware of misleading notices sent by private companies about your application.  Private companies not associated with the USPTO use public information available in trademark registrations to mail and email trademark-related offers and notices – most of which require fees.  All official USPTO correspondence will only be emailed from the domain “@uspto.gov.”

 

 

 


uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed