TEAS RF New Application

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1478 (Rev 09/2006)

OMB No. 0651-0009 (Exp 02/28/2021)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1478 (Rev 09/2006)

OMB No. 0651-0009 (Exp 02/28/2021)

Trademark/Service Mark Application, Principal Register

Serial Number: 88398177

Filing Date: 04/23/2019

To the Commissioner for Trademarks:

MARK: HR HILLROM (stylized and/or with design, see mark)

The literal element of the mark consists of HR HILLROM.
The mark consists of two vertical lines separated by a dot between the two lines to form an "H" and a dot to the upper right of the "H" to form an "R", with the word "Hillrom" underneath, all the foregoing appearing on a shaded square.
The applicant, Hill-Rom Services, Inc., a corporation of Indiana, having an address of
      1069 State Route 46 East
      Batesville, Indiana 47006
      United States

requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C. Section 1051 et seq.), as amended, for the following:

       International Class 009:  Computer hardware for healthcare facilities; computer software for healthcare facilities for use in the communication of information related to patients, staff, and equipment; computer software for healthcare facilities for use in collecting and displaying critical path patient related information on a real-time basis; computer software for use in healthcare facilities to collect, collate, store, analyze, display and distribute patient and patient bed data by means of a healthcare facility computer network; computer software for use in healthcare facilities to monitor and display patient status and location; computer software to monitor healthcare facility patient and patient bed data and issue alerts based thereon; computer software for healthcare facilities for the management and monitoring of patient health data; computer software for healthcare facilities for the communication and exchange of information among healthcare providers; computer software for healthcare facilities for the collection, editing, organizing, modifying, book marking, transmission, storage and sharing of data and information; data collection systems consisting of computer hardware and software for the collection of data for healthcare facilities; healthcare facility communication and location systems consisting of patient position and patient physical condition sensors and data input devices; patient bed operational status and patient bed location sensors and data input devices, and computer software to monitor patient and patient bed data and issue alerts based thereon; headwall gas and electricity distribution units for use in supplying medical gases and electricity to patient rooms in healthcare facilities; parts and fittings specially adapted for all of the foregoing goods; Electrical and electronic remote controls for operating tables including sending and receiving apparatus, manual switching apparatus and control panels; Electrical apparatus and instruments, namely, computer monitors, computer monitoring networks comprising computer hardware and downloadable software for monitoring and analyzing vital signs, hardwired and wireless communication systems comprising electrical wires, access ports, transceivers, antennas, modems and computer hardware, and replacement parts therefor; surgical and medical instruments and apparatus, namely, optical fiber bundles and power transformers for amplification
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 010:  Therapeutic pressure reduction patient support mattresses and therapeutic pressure reduction patient support mattress overlays for medical purposes; fluidized patient support apparatus in the nature of a therapeutic support mattress containing medical grade microspheres; medical stretchers; Medical apparatus, namely, patient positioning, manipulating and lifting apparatus to assist physically disabled individuals in transferring from one position to another; medical stirrup systems, namely, stirrup pads, stirrup straps, stirrup boots, stirrup adjustment sockets, and stirrup adjustment clamps; intravenous poles; Medical apparatus, namely, fixed, articulated and telescoping arms for supporting and positioning medical equipment, and to supply medical gas, electricity and provide communication hook ups; medical accessory racks specially fitted and adapted for holding medical accessories; medical examination lamps; head supporting cradles and head supporting pads for use in medical procedures in connection with medical beds; body extremity suspension, traction and support systems consisting of traction apparatus for medical use and supports for general medical use; commodes for medical patients and disabled persons for medical use; mobility aids, namely, invalid walkers; Medical apparatus, namely, airway clearance system comprised of vest, air-pulse generator, tubing and hand and foot pedal; medical products, namely, surgical beds, medical beds, and therapeutic beds; hospital beds for use by burn patients; mattresses, mattress overlays, and motorized patient transport mechanism, for transporting patients, all sold as a component of medical beds; parts and fittings specially adapted for all of the foregoing goods; Durable medical equipment, namely, stirrup systems, namely, stirrup pads, stirrup straps, stirrup boots, stirrup adjustment sockets, and stirrup adjustment clamps; arm restraints; arm restraint pads; shoulder supports; shoulder support pads; mobile medical accessory racks; wall-mounted medical accessory racks; medical table adapters; arm, hand, and minor procedures surgery tables and legs and tops therefor; debridement kits comprised of drain trays cut out pads and supports for medical use; finger and wrist traction accessories, namely, traction bars for medical use; finger traps; finger distraction hangers; upper extremity suspension systems, namely, upright supports, traction bars, universal bases, and adjustment handles for medical use; shoulder supports for medical use; leg support systems, namely, supports, rods, straps, pads, and clamps for medical use; pads for knee holders, elbow holders, and wrist holders; operating room pads for tables, gurneys, and stools; donut head pads; arm support systems, namely, arm tables, supports, rods, straps, pads, and clamps for medical use; lateral patient positioners and pads; universal medical accessory clamps; leg preparation stands, pads, and straps; anesthesia screens and mounting bases; transparent patient drapes; operating room table restraint straps; armboard restraint straps; table extensions; and I.V. and irrigation towers; Surgical, medical, dental and veterinary apparatus and instruments, namely, blades, scalpel handles, and scalpels; pre-operative surgical marking pen; endoscopic kittner for medical purposes; medical equipment, namely, vessel loops; clamp covers; suture booties; sterile tonsil snares; fluid collection basin for cath lab; medical instrument tip protectors; medical instrument tray corner protectors; medical instrument identification tape and write on labels; surgical needles; wound drainage bulbs, evacuators and fluid collection containers; wound drains, nasal and catheter tube holders; wound closure devices; surgical blades, scalpels, and blade disarmers; needle nest for medical purposes; medical needle counter; medical syringe and scalpel handling system; medical syringe and scalpel transfer tray; medical fluid absorption mats; medical cord cover; surgical skin markers; disposable light handles for medical lights; disposable light handle covers for medical lights; disposable covers for medical cameras; knives for use in medical procedures; cautery tip cleaners for assisting in the cleaning and removing of material from cautery tips during surgical procedures ; pin covers for medical use; medical apparatus in the nature of sterile safety pins; Surgical, medical, and veterinary apparatus, devices and instruments, namely, ceiling service units specially adapted for mounting medical apparatus, for feeding electricity to medical apparatus and for supplying signals, liquids, and gases to and from medical apparatus; cameras especially made for medical purposes for broadcasting extracorporeal details of operations; patient transport systems, namely, patient transporters and lifts for transporting patients to, and from, and for lifting patients onto and from, operating tables; invalid lifts, stretchers for patient transport; special furniture for medical purposes, namely, medical device and instrument tables, hand and arm positioning tables; medical operating tables; parts for medical operating tables, and accessories for medical operating tables, namely, leg-holding traction devices, carbon fiber elements, namely, table tops and table top parts for operating room tables for intraoperative X-ray diagnosis; head, pelvis, leg and knee supports for medical use; lamps for medical purposes, in particular for operating theatres; patient transferring apparatus; trolleys for medical purposes, namely, medical instrument and apparatus trolleys; lifting and transport devices for medical operating tables and operating table support; Special furniture for medical use, namely, leg support extenders for attachment to furniture; mobile and stationary invalid lifts and patient stretchers, all adapted for medical purposes; walking supports for disabled, namely, crutches, supporting canes, walking frames; Surgical and medical instruments and apparatus, namely, thermometers; Patient monitoring units, namely, vital signs monitors, central monitoring stations comprising computer monitors and computer software for monitoring vital signs, and remote monitoring apparatus for blood oxygen saturation (SPO2), capnography and electrocardiographs (ECGS); eye examination and diagnostic devices, namely, ophthalmoscopes for vision screening and glaucoma detection; ear diagnostic and therapeutic devices, namely, ear irrigation systems comprising irrigation syringes and pressure/temperature irrigation control apparatus for irrigating ears; light sources, namely, light boxes for surgical and medical instruments and medical examination lamps, and cases, structural parts, and fittings therefor
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 016:  Permanent markers and paper write-on adhesive labels used for marking medications, instruments and other objects in the surgical environment
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 020:  Healthcare facility furniture; hospital beds not for use by burn patients; mattresses, mattress overlays, and motorized patient transport mechanism, for transporting patients, all sold as a component of hospital beds; motorized patient positioning mechanisms, namely, motorized mechanisms for changing the position of a bed to facilitate the positioning of persons using the bed, sold as a component of beds not for medical purposes; controller and display monitor for controlling hospital beds, namely, for controlling bed lighting and patient positioning, sold as an integral part of hospital beds; hospital bed exit detection systems sold as an integral part of hospital beds; Structural parts and fittings for all of the foregoing goods; woven and non-woven textile fabrics sold as a component of mattresses not for burn patients
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 027:  Anti-fatigue floor mat used to help reduce stress and discomfort associated with prolonged standing during surgical procedures
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 035:  Business management of healthcare facilities; healthcare providers business management for others; data processing services; business research services, namely, providing analysis of patient and caregiver data relative to specific facility locations; inventory management in the field of medical equipment; direct retail sales services through mail, telephone and on-line orders and through direct solicitation by sales agents, all in the field of medical equipment and supplies; retail and wholesale store services featuring medical equipment and supplies; Consulting services in the field of medical practice management for others, namely, integrating medical equipment and information systems within an operating room or medical facility
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 037:  Maintenance and repair of healthcare furnishings and equipment, repair of medical equipment, remanufacturing services in the nature of refurbishing medical equipment; technical support services, namely, providing installation, maintenance and repair advice in the fields of healthcare furnishings, healthcare equipment and medical equipment; cleaning and disinfecting medical and healthcare equipment and healthcare furnishings
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 041:  Educational services, namely, healthcare classes, seminars and workshops
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 042:  Healthcare facility design services; design and installation of healthcare computer network information systems not including computer hardware; consulting services related to healthcare computer network information systems, technical support services for healthcare computer network information systems in the nature of monitoring of and troubleshooting problems with healthcare information systems; Consulting services in the field of medical practice management for others, namely, integrating information systems within an operating room or medical facility
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.

       International Class 044:  Consulting services in the field of healthcare; medical services, namely, consultation services related to patient management, treatment and monitoring; medical equipment rental services; Consulting services in the field of medical practice management for others, namely, integrating medical equipment within an operating room or medical facility
Intent to Use: The applicant has a bona fide intention, and is entitled, to use the mark in commerce on or in connection with the identified goods/services.



Claim of Active Prior Registration(s)
The applicant claims ownership of active prior U.S. Registration Number(s) 1371030 and 3978415.

The applicant's current Attorney Information:
      Clay A. Tillack and Thomas P. White, Chris L. Bollinger of Schiff Hardin LLP      P.O. Box 06079
      Chicago, Illinois 60606-0079
      United States
      312-258-5758(phone)
      312-258-5600(fax)
      trademarks@schiffhardin.com (authorized)
The attorney docket/reference number is 39108.

The applicant's current Correspondence Information:

Clay A. Tillack

Schiff Hardin LLP

P.O. Box 06079

Chicago, Illinois 60606-0079

312-258-5758(phone)

312-258-5600(fax)

trademarks@schiffhardin.com (authorized) E-mail Authorization: I authorize the USPTO to send e-mail correspondence concerning the application to the applicant, the applicant's attorney, or the applicant's domestic representative at the e-mail address provided in this application. I understand that a valid e-mail address must be maintained and that the applicant or the applicant's attorney must file the relevant subsequent application-related submissions via the Trademark Electronic Application System (TEAS). Failure to do so will result in the loss of TEAS Reduced Fee status and a requirement to submit an additional processing fee of $125 per international class of goods/services.

A fee payment in the amount of $2750 has been submitted with the application, representing payment for 10 class(es).

Declaration

	Basis: If the applicant is filing the application based on use in commerce under 15 U.S.C. § 1051(a): The signatory believes that the applicant is the owner of the trademark/service mark sought to be registered; The mark is in use in commerce on or in connection with the goods/services in the application; The specimen(s) shows the mark as used on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate. And/Or If the applicant is filing the application based on an intent to use the mark in commerce under 15 U.S.C. § 1051(b), § 1126(d), and/or § 1126(e): The signatory believes that the applicant is entitled to use the mark in commerce; The applicant has a bona fide intention to use the mark in commerce on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate.
	To the best of the signatory's knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive.
	To the best of the signatory's knowledge, information, and belief, formed after an inquiry reasonable under the circumstances, the allegations and other factual contentions made above have evidentiary support.
	The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.

Declaration Signature

Signature: /Deanna F Young/   Date: 04/23/2019
Signatory's Name: Deanna F. Young
Signatory's Position: Trademark Administrator
Payment Sale Number: 88398177
Payment Accounting Date: 04/24/2019

Serial Number: 88398177
Internet Transmission Date: Tue Apr 23 13:56:37 EDT 2019
TEAS Stamp: USPTO/BAS-XX.XX.XXX.X-201904231356375907
70-88398177-620c679fe67dd4c383d6478c8fc3
bab904fe478725ad102fdd24ef73d554776f3-CC
-4170-20190423102111989315