|
NOTICE OF ALLOWANCE (NOA)
ISSUE DATE: Dec 31, 2019 |
U.S. Serial Number: 88391602
Mark: WHITE BOX
Docket/Reference Number: 123938-0001
|
No opposition was filed for this published application. The issue date of this NOA establishes the due date for the filing of
a Statement of Use (SOU) or a Request for Extension of Time to file a Statement of Use (Extension Request). WARNING: An SOU that meets all legal requirements must be filed before a registration
certificate can issue. Please read below for important information regarding the applicant's pending six (6) month deadline. |
SIX (6)-MONTH DEADLINE: Applicant has six (6) MONTHS from the NOA issue date to file either: |
- |
An SOU, if the applicant is using the mark in commerce (required even if the applicant was using the mark at the time of filing the
application, if use basis was not specified originally); OR |
- |
An Extension Request, if the applicant is not yet using the mark in commerce. If an Extension Request is filed, a new request must
be filed every six (6) months until the SOU is filed. The applicant may file a total of five (5) extension requests. WARNING: An SOU may not be filed more than thirty-six
(36) months from when the NOA issued. The deadline for filing is always calculated from the issue date of the NOA. |
How to file SOU and/or Extension Request:
Use the Trademark Electronic Application System (TEAS). Do NOT reply to this e-mail, as e-mailed filings will NOT be processed. Both the SOU and Extension Request have many
legal requirements, including fees and verified statements; therefore, please use the USPTO forms available online at http://www.gov.uspto.report/trademarks-application-process/filing-online (under the "INTENT-TO-USE (ITU) FORMS" category) to avoid the possible omission of required information.
If you have questions about this notice, please contact the Trademark Assistance Center at 1-800-786-9199. |
FAILURE TO FILE A REQUIRED DOCUMENT OUTLINED ABOVE DURING THE APPROPRIATE TIME PERIOD WILL RESULT IN THE ABANDONMENT OF THIS
APPLICATION. |
REVIEW APPLICATION INFORMATION FOR ACCURACY |
Serial Number: |
88391602
|
Mark: |
WHITE BOX
|
Docket/Reference Number: |
123938-0001
|
Owner: |
Holley Performance Products Inc.
1801 Russellville Road
Bowling Green , KENTUCKY 42101
|
Correspondence Address: |
Rachelle A. Dubow, Esq.
MORGAN, LEWIS & BOCKIUS LLP
ATTN: TMSU
ONE FEDERAL STREET
BOSTON MA 02110
|
This application has the following bases, but not necessarily for all listed goods/services: |
|
Section 1(a): NO |
Section 1(b): YES |
Section 44(e): NO |
GOODS/SERVICES BY INTERNATIONAL CLASS |
007 - |
Automotive engine components, namely, alternators, carburetors, fuel pumps; Mechanical fuel controls for engines; Fuel filters; Carburetor repair kits comprising
parts sold as a unit, namely, fuel needle valve and seat assemblies, accelerating pump pistons and diaphragms, power valves, secondary throttle valve actuator diaphragms, gaskets, seals, o-rings,
main bodies, venturis, annular discharge rings, slosh tube extensions, accelerating pump discharge nozzles, accelerating pump cams, fuel bowl vent tubes, check valves, springs, baffles, tubes and
screws, adjusting nuts, choke coils, choke flaps, choke linkages, emulsion tubes and idle mixture needles; Remanufactured carburetors comprising parts sold as a unit, namely, fuel needle valve and
seat assemblies, accelerating pump pistons and diaphragms, power valves, secondary throttle valve actuator diaphragms, gaskets, seals, o-rings, main bodies, venturis, annular discharge rings, slosh
tube extensions, accelerating pump discharge nozzles, accelerating pump cams, fuel bowl vent tubes, check valves, springs, baffles, tubes and screws, adjusting nuts, choke coils, choke flaps, choke
linkages, emulsion tubes and idle mixture needles; dashpots; choke diaphragms; intake manifolds; valve covers; air conditioning compressors; fuel injection parts, namely, throttle bodies, electrical
fuel pumps, electronic control modules, and fuel filters, sold as a unit; Exhaust manifolds for engines; Engine mufflers ; Automobile oil pans; Intake manifolds for internal combustion engines for
vehicles -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
009 - |
Combustion engine fuel system and accessory components comprising parts sold as a unit, namely, electronic controls for engines, fuel pump pressure regulators,
throttle valve idle stop solenoids, choke thermostat assemblies, sensors, namely, pressure sensors, temperature sensors, air flow sensors, fuel flow sensors, throttle position sensors, idle air
control sensors and parts thereof, and fast idle solenoids and parts therefor; Electronic control modules -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
012 - |
Metal fuel line tubing -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
035 - |
Online retail store services featuring automobile parts -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
ALL OF THE GOODS/SERVICES IN EACH CLASS ARE LISTED.
|
Appropriate Specimens for Goods and/or Services: A trademark specimen should be a label, tag, or container for the goods, or a
display associated with the goods. See TMEP §§904.03 et seq. A service mark specimen should be an advertisement, sign, brochure, website printout or other image that shows the mark used in the actual
sale or advertising of the services. See TMEP §§1301.04 et seq. For an instructional video on what is an appropriate trademark or service mark specimen for a good and/or service, click here. |
Fraudulent statements may result in registration being cancelled: Applicants must ensure that statements made in filings to the
USPTO are accurate, as inaccuracies may result in the cancellation of any issued trademark registration. The lack of a bona fide intention to use the mark with ALL goods and/or services listed
in an application or the lack of actual use on all goods and/or services for which use is claimed could jeopardize the validity of the registration, possibly resulting in its
cancellation. |
Additional information: For information on filing and maintenance requirements for U.S. trademark applications and registrations
and required fees, please consult the USPTO website at http://www.uspto.gov or call the Trademark Assistance Center at 1-800-786-9199. |
|