To: | Cactus Wellhead, LLC (toborb@gtlaw.com) |
Subject: | U.S. TRADEMARK APPLICATION NO. 88378271 - SMARTVALVE - 134913.01260 |
Sent: | 6/26/2019 4:59:58 PM |
Sent As: | ECOM126@USPTO.GOV |
Attachments: | Attachment - 1 Attachment - 2 Attachment - 3 Attachment - 4 |
UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
U.S. APPLICATION SERIAL NO. 88378271
MARK: SMARTVALVE
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
APPLICANT: Cactus Wellhead, LLC
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW. A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.
ISSUE/MAILING DATE: 6/26/2019
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issues below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION
Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 5033785. Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq. See the attached registration.
Applicant’s mark is “SMARTVALVE”, presented in standard character form, for use in connection with the following goods:
International Class 7: parts of oilfield wellhead machines, namely, frac valves
Registrant’s mark is “DIGITAL SMART VALVE”, presented with design, for use in connection with the following goods, in pertinent part:
International Class 7: valves being parts of machines; pressure reducing valves being parts of machines; pressure valves being parts of machines; valves for pump machines; Valves being parts of machines used for controlling the flow of gases and liquid; pump control valves; dosing valves being parts of machines
Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods of the parties. See 15 U.S.C. §1052(d). Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”). In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017). Only those factors that are “relevant and of record” need be considered. M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018).
Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis: (1) the similarities between the compared marks and (2) the relatedness of the compared goods. See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.
Similarity of the Marks
Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression. Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v). “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.” In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)); TMEP §1207.01(b).
When evaluating a composite mark consisting of words and a design, the word portion is normally accorded greater weight because it is likely to make a greater impression upon purchasers, be remembered by them, and be used by them to refer to or request the goods and/or services. In re Aquitaine Wine USA, LLC, 126 USPQ2d 1181, 1184 (TTAB 2018) (citing In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012)); TMEP §1207.01(c)(ii). Thus, although marks must be compared in their entireties, the word portion is often considered the dominant feature and is accorded greater weight in determining whether marks are confusingly similar, even where the word portion has been disclaimed. In re Viterra Inc., 671 F.3d at 1366-67, 101 USPQ2d at 1911 (citing Giant Food, Inc. v. Nation’s Foodservice, Inc., 710 F.2d 1565, 1570-71, 218 USPQ2d 390, 395 (Fed. Cir. 1983)).
In this case, the marks “SMARTVALVE” and “DIGITAL SMART VALVE” are similar in commercial impression. Both marks share the wording “SMART” and “VALVE”. The slight difference in the appearance between the shared wording in the marks, namely, applicant’s mark, which appears as a compound word with no space separating the words, that is, “SMARTVALVE”; and registrant’s mark appears as multiple words with space separating the words, that is, “SMART VALVE” does not obviate the similarity between the marks because the shared wording is essentially identical in sound and virtually identical in appearance. See, e.g., Seaguard Corp. v. Seaward Int’l, Inc., 223 USPQ 48, 51 (TTAB 1984) (“[T]he marks ‘SEAGUARD’ and ‘SEA GUARD’ are, in contemplation of law, identical [internal citation omitted].”).
Additionally, applicant’s omission of the term “DIGITAL” does not obviate the similarity between the marks because although applicant’s mark does not contain the entirety of the registered mark, applicant’s mark is likely to appear to prospective purchasers as a shortened form of registrant’s mark. See In re Mighty Leaf Tea, 601 F.3d 1342, 1348, 94 USPQ2d 1257, 1260 (Fed. Cir. 2010) (quoting United States Shoe Corp., 229 USPQ 707, 709 (TTAB 1985)). Thus, merely omitting some of the wording from a registered mark may not overcome a likelihood of confusion. See In re Mighty Leaf Tea, 601 F.3d 1342, 94 USPQ2d 1257; In re Optica Int’l, 196 USPQ 775, 778 (TTAB 1977); TMEP §1207.01(b)(ii)-(iii). In this case, applicant’s mark does not create a distinct commercial impression from the registered mark because it contains some of the wording in the registered mark and does not add any wording that would distinguish it from that mark.
Furthermore, the difference in the design feature in registrant’s mark does not obviate the similarity between the marks because the word portion is dominant and applicant’s mark is in standard character form and thus could be presented in the same manner of display. A mark in typed or standard characters may be displayed in any lettering style; the rights reside in the wording or other literal element and not in any particular display or rendition. See In re Viterra Inc., 671 F.3d 1358, 1363, 101 USPQ2d 1905, 1909 (Fed. Cir. 2012); In re Mighty Leaf Tea, 601 F.3d 1342, 1348, 94 USPQ2d 1257, 1260 (Fed. Cir. 2010); 37 C.F.R. §2.52(a); TMEP §1207.01(c)(iii). Thus, a mark presented in stylized characters and/or with a design element generally will not avoid likelihood of confusion with a mark in typed or standard characters because the word portion could be presented in the same manner of display. See, e.g., In re Viterra Inc., 671 F.3d at 1363, 101 USPQ2d at 1909; Squirtco v. Tomy Corp., 697 F.2d 1038, 1041, 216 USPQ 937, 939 (Fed. Cir. 1983) (stating that “the argument concerning a difference in type style is not viable where one party asserts rights in no particular display”).
Therefore, considered in their entireties, the marks convey highly similar overall commercial impressions. Any differences in sound, appearance and connotation is outweighed by the marks similar commercial impression due to the shared wording “SMART” and “VALVE”.
As such, the marks are confusingly similar pursuant to Section 2(d) of the Trademark Act.
Similarity of the Goods
In this case, the registration uses broad wording to describe “valves being parts of machines” which presumably encompasses all goods of the type described, including applicant’s more narrow “parts of oilfield wellhead machines, namely, frac valves”. See, e.g., In re Solid State Design Inc., 125 USPQ2d 1409, 1412-15 (TTAB 2018); Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015). Thus, applicant’s and registrant’s goods are legally identical. See, e.g., In re i.am.symbolic, llc, 127 USPQ2d 1627, 1629 (TTAB 2018) (citing Tuxedo Monopoly, Inc. v.Gen. Mills Fun Grp., Inc., 648 F.2d 1335, 1336, 209 USPQ 986, 988 (C.C.P.A. 1981); Inter IKEA Sys. B.V. v. Akea, LLC, 110 USPQ2d 1734, 1745 (TTAB 2014); Baseball Am. Inc. v. Powerplay Sports Ltd., 71 USPQ2d 1844, 1847 n.9 (TTAB 2004)).Additionally, the goods of the parties have no restrictions as to nature, type, channels of trade, or classes of purchasers and are “presumed to travel in the same channels of trade to the same class of purchasers.” In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)). Thus, applicant’s and registrant’s goods are related.
Accordingly, as currently identified, the parties’ goods are either identical, overlapping or highly related, and therefore considered related for purposes of likelihood of confusion analysis. In view of the foregoing, the application must be refused registration pursuant to Section 2(d) of the Trademark Act.
If applicant responds to the refusal, applicant must also respond to the requirement set forth below.
REQUEST FOR INFORMATION
Due to the descriptive nature of the applied-for mark, applicant must provide the following information and documentation regarding the goods and wording appearing in the mark:
(1) Fact sheets, instruction manuals, brochures, advertisements and pertinent screenshots of applicant’s website as it relates to the goods in the application, including any materials using the terms in the applied-for mark. Merely stating that information about the goods is available on applicant’s website is insufficient to make the information of record.;
(2) If these materials are unavailable, applicant should submit similar documentation for goods and services of the same type, explaining how its own product or services will differ. If the goods feature new technology and information regarding competing goods not available, applicant must provide a detailed factual description of the goods. Factual information about the goods must make clear how they operate, salient features, and prospective customers and channels of trade. For services, the factual information must make clear what the services are and how they are rendered, salient features, and prospective customers and channels of trade. Conclusory statements will not satisfy this requirement.; and
(3) Applicant must respond to the following questions:
(1) Applicant must explain whether the wording in the mark “SMARTVALVE” has any significance in the oil trade or industry or as applied to applicant’s goods, or if such wording is a “term of art” within applicant’s industry.
(2) Do applicant’s goods feature “SMART” characteristics?
(3) Do applicant’s goods employ automated technology or “SMART” technology?
(4) Do applicant’s competitors use the term “SMART” to advertise similar goods?
See 37 C.F.R. §2.61(b); TMEP §§814, 1402.01(e).
Failure to comply with a request for information is grounds for refusing registration. In re Harley, 119 USPQ2d 1755, 1757-58 (TTAB 2016); TMEP §814.
RESPONSE GUIDELINES
Portaro, Alexandra
/Alexandra Portaro/
Trademark Examining Attorney
Law Office 126
(571) 270-3924
Alexandra.portaro@uspto.gov
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.