UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

 

ISSUE/MAILING DATE: 5/30/2019

 

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SUMMARY OF ISSUES:

• Section 2(d)- Likelihood of Confusion
• Mark Description- Amendment Required
• Identification of Goods – Indefinite
• Multiple-Class Application- Advisory

 

SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION

Registration of the applied-for mark is refused because of a likelihood of confusion with the following mark(s)

 

CAPSTONE, in standard characters, for the following relevant goods “Hand tools for repair and maintenance of bicycles” in Class 8 (U.S. Registration No. 5536090).

 

Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the attached registration(s).

 

Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods and/or services of the parties.  See 15 U.S.C. §1052(d).  Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”).  In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017).  Only those factors that are “relevant and of record” need be considered.  M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018). 

 

Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis:  (1) the similarities between the compared marks and (2) the relatedness of the compared goods and/or services.  See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.

 

In this case, the following factors are the most relevant:  similarity of the marks, similarity and nature of the goods, and similarity of the trade channels of the goods.  See In re Viterra Inc., 671 F.3d 1358, 1361-62, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Dakin’s Miniatures Inc., 59 USPQ2d 1593, 1595-96 (TTAB 1999); TMEP §§1207.01 et seq.

 

1.     Similarity of the Marks

 

The applicant’s mark: CAPSTONE with design.

 

The registrant’s marks: CAPSTONE, in standard characters (U.S. Registration No. 5536090).

 

The dominant portion of the compared marks are similar in appearance and meaning because they all contain the identical wording “CAPSTONE”.  Comparing the literal word portions of the marks, the marks are identical. Thus, the dominant portion of the compared marks are similar and create the same overall commercial impression and the marks are thus confusingly similar for the purposes of determining likelihood of confusion. 

 

In addition, applicant’s mark is a composite mark containing stylized wording and design. Specifically, the mark consists of the word “CAPSTONE” in stylized font wherein the letter “A” appears in the mark in the shape of a triangle with a long and short line intersecting in the middle of the triangle.  When evaluating a composite mark consisting of words and a design, the word portion is normally accorded greater weight because it is likely to make a greater impression upon purchasers, be remembered by them, and be used by them to refer to or request the goods and/or services.  In re Aquitaine Wine USA, LLC, 126 USPQ2d 1181, 1184 (TTAB 2018) (citing In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012)); TMEP §1207.01(c)(ii).  Thus, although marks must be compared in their entireties, the word portion is often considered the dominant feature and is accorded greater weight in determining whether marks are confusingly similar, even where the word portion has been disclaimed.  In re Viterra Inc., 671 F.3d at 1366-67, 101 USPQ2d at 1911 (citing Giant Food, Inc. v. Nation’s Foodservice, Inc., 710 F.2d 1565, 1570-71, 218 USPQ2d 390, 395 (Fed. Cir. 1983)).  Therefore, the inclusion of the design element in this mark does not obviate a finding of likelihood of confusion.

 

Thus, the marks convey the same commercial impression and are substantially similar in this comparison. Consumers are likely to be confused as to the source of the origin of the goods and the marks are similar. In re i.am.symbolic, llc, 116 USPQ2d 1406, 1411 (TTAB 2015), aff’d, 866 F.3d 1315, 123 USPQ2d 1744 (Fed. Cir. 2017). 

 

Therefore, the marks are confusingly similar. 

 

2.     Relatedness of the Goods

 

The applicant’s goods are:

 

Class 8: Serving spoon, Sterling silver tablespoon, Tongs for kitchen use, Knife, Fruit knife, Ladle (Hand tool), Spoon, Iron, Kitchen shears, Scissors, Vegetable shredders, Nail scissors, Nail clippers, Hatchet, Manual hand drill, Wrench, Screwdriver, Saw (Hand tool), Sickle, Syringe for spraying insecticides, Shovel (Hand tool), Hand operated sprayer, Mountain-climbing pickle (Ice axe).

 

The registrant’s relevant goods are:

 

            Class 8: Hand tools for repair and maintenance of bicycles.

 

When analyzing an applicant’s and registrant’s goods and/or services for similarity and relatedness, that determination is based on the description of the goods and/or services stated in the application and registration at issue, not on extrinsic evidence of actual use.  See Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1323, 110 USPQ2d 1157, 1162 (Fed. Cir. 2014) (quoting Octocom Sys. Inc. v. Hous. Computers Servs. Inc., 918 F.2d 937, 942, 16 USPQ2d 1783, 1787 (Fed. Cir. 1990)). 

 

Absent restrictions in an application and/or registration, the identified goods and/or services are presumed to travel in the same channels of trade to the same class of purchasers.  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)).  Additionally, unrestricted and broad identifications are presumed to encompass all goods and/or services of the type described.  See, e.g., Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015); In re N.A.D., Inc., 57 USPQ2d 1872, 1874 (TTAB 2000). 

 

Further, the registrant uses broad wording to describe the goods and/or services, which presumably encompasses all goods and/or services of the type described, including applicant’s more narrow identification.  See, e.g., Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015); In re N.A.D., Inc., 57 USPQ2d 1872, 1874 (TTAB 2000).  For example, registrant’s identification of “Hand tools for repair and maintenance of bicycles” is presumed to encompass the related listed goods in applicant’s identification of goods, including “Wrench” and “Screwdriver”.  

 

The overriding concern is not only to prevent buyer confusion as to the source of the goods and/or services, but to protect the registrant from adverse commercial impact due to use of a similar mark by a newcomer.  See In re Shell Oil Co., 992 F.2d 1204, 1208, 26 USPQ2d 1687, 1690 (Fed. Cir. 1993).  Therefore, any doubt regarding a likelihood of confusion determination is resolved in favor of the registrant.  TMEP §1207.01(d)(i); see Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1265, 62 USPQ2d 1001, 1003 (Fed. Cir. 2002); In re Hyper Shoppes (Ohio), Inc., 837 F.2d 463, 464-65, 6 USPQ2d 1025, 1026 (Fed. Cir. 1988).

 

Thus, applicant’s and registrant’s goods and/or services are considered related for likelihood of confusion purposes.  See, e.g., In re Davey Prods. Pty Ltd., 92 USPQ2d 1198, 1202-04 (TTAB 2009); In re Toshiba Med. Sys. Corp., 91 USPQ2d 1266, 1268-69, 1271-72 (TTAB 2009).

 

Although applicant’s mark has been refused registration, applicant may respond to the refusal(s) by submitting evidence and arguments in support of registration.  However, if applicant responds to the refusal(s), applicant must also respond to the requirement(s) set forth below.

 

DESCRIPTION OF MARK

 

Applicant must submit an amended description of the mark because the current one is incomplete and does not describe all the significant aspects of the mark.  37 C.F.R. §2.37; see TMEP §§808.01, 808.02.  Descriptions must be accurate and identify all the literal and design elements in the mark.  See 37 C.F.R. §2.37; TMEP §§808 et seq. 

 

Further, applicant must delete from the description any text that does not reference things appearing in the mark, such as interpretation, assessment, or analysis of the mark elements, or indications of how the mark is or is not used or intended to be used.  See 37 C.F.R. §2.37; TMEP §808.02. 

 

The following description is suggested, if accurate:  The mark consists of the word “CAPSTONE” in stylized font wherein the letter “A” appears in the mark in the shape of a triangle with a long and short line intersecting in the middle of the triangle.

 

IDENTIFICATION OF GOODS-INDEFINITE

 

The wording identified below in the identification of goods must be clarified because it is too broad and could include goods in other international classes.  See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03.  Furthermore, the wording is indefinite and must be clarified because it does not describe the actual nature of the goods offered.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Applicant must amend this wording to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  If the goods have no common commercial or generic name, applicant must describe the product, its main purpose, and its intended uses.  See id.

 

The identification of goods and/or services contains parentheses.  Generally, applicants should not use parentheses and brackets in identifications in their applications so as to avoid confusion with the USPTO’s practice of using parentheses and brackets in registrations to indicate goods and/or services that have been deleted from registrations or in an affidavit of incontestability to indicate goods and/or services not claimed.  See TMEP §1402.12.  The only exception is that parenthetical information is permitted in identifications in an application if it serves to explain or translate the matter immediately preceding the parenthetical phrase in such a way that it does not affect the clarity or scope of the identification, e.g., “fried tofu pieces (abura-age).”  Id.

 

Therefore, applicant must remove the parentheses from the identification and incorporate any parenthetical or bracketed information into the description of the goods and/or services.

 

Applicant may substitute the following wording, if accurate: 

 

International Class 7: “Power-driven wrenches; Electric screwdrivers”.

 

International Class 8: “Serving spoon, Sterling silver tablespoon, Tongs for kitchen use, Knife, namely, {identify the specific nature of the knife, e.g., kitchen knives}, Fruit knife, Ladle, namely, hand tools in the nature of foundry ladles (Hand tool), Spoon being tableware, Iron, namely, {identify the specific nature of the iron, e.g., hand tools in the nature of priming irons, flat irons etc.}, Kitchen shears, Scissors, hand-operated vegetable shredders, Nail scissors, Nail clippers, Hatchet, Manual hand drill, Wrench, namely, {identify the nature of the wrench, e.g., socket wrench, wrenches in the nature of hand tools}, Screwdriver, namely, {identify the nature of the screwdriver, e.g., non-electric screwdrivers}, Saw, hand-operated (Hand tool), Sickle, Syringe for spraying insecticides, Shovel, hand-operated (Hand tool), Hand operated sprayer for {specify industry or use, e.g. for insecticide}, Mountain-climbing pickle, namely, ice axes (Ice axe)”.

 

International Class 21: “Serving spoon, tongs for kitchen use, Syringe for spraying garden insecticides”.

 

While the suggested wording above provides examples of wording that meets the Office’s requirements for specificity, it does not provide every possible acceptable identification. Applicant must ensure that any identification submitted is accurate, concise, properly classified, and does not include goods or services not included in the identification submitted with the application as originally filed.  Applicant may amend the identification to clarify or limit the goods and/or services, but not to broaden or expand the goods and/or services beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods and/or services may not later be reinserted.  See TMEP §1402.07(e).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

MULTIPLE-CLASS APPLICATION REQUIREMENTS

 

The application identifies goods and/or services in more than one international class; therefore, applicant must satisfy all the requirements below for each international class based on Trademark Act Section 44:

 

(1)       List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class.

 

(2)       Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule).  The application identifies goods and/or services that are classified in at least 3 classes; however, applicant submitted a fee(s) sufficient for only 1 class(es).  Applicant must either submit the filing fees for the classes not covered by the submitted fees or restrict the application to the number of classes covered by the fees already paid.

 

See 15 U.S.C. §§1051(b), 1112, 1126(e); 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(2)-(3), 2.86(a); TMEP §§1403.01, 1403.02(c).

 

See an overview of the requirements for a Section 44 multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.

 

RESPONSE GUIDELINES

 

 Please call or email the assigned trademark examining attorney with questions about this Office action.  Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the refusal(s) and/or requirement(s) in this Office action.  See TMEP §§705.02, 709.06.  Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

 

Carolyn Wlodarczyk

/Carolyn Wlodarczyk/

Trademark Examining Attorney

Law Office 109

571-272-9273

carolyn.wlodarczyk@uspto.gov

 

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 5/30/2019 FOR U.S. APPLICATION SERIAL NO. 88337757

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 5/30/2019 (or sooner if specified in the Office action).  A response transmitted through the Trademark Electronic Application System (TEAS) must be received before midnight Eastern Time of the last day of the response period.  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the TEAS response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.