TEAS RF New Application

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1478 (Rev 09/2006)

OMB No. 0651-0009 (Exp 02/28/2021)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1478 (Rev 09/2006)

OMB No. 0651-0009 (Exp 02/28/2021)

Trademark/Service Mark Application, Principal Register

Serial Number: 88324885

Filing Date: 03/04/2019

To the Commissioner for Trademarks:

MARK: HUNTSMAN (Standard Characters, see mark)
The literal element of the mark consists of HUNTSMAN.
The mark consists of standard characters, without claim to any particular font style, size, or color.

The applicant, Huntsman International LLC, a limited liability company legally organized under the laws of Delaware, having an address of
      10003 Woodloch Forest Drive
      The Woodlands, Texas 77380
      United States
      XXXX (not authorized)

requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C. Section 1051 et seq.), as amended, for the following:

       International Class 001:  active chemical ingredients and solvents for use in the manufacture of insecticides; adjuvants for use with agricultural chemicals; alkyl benzene for use as chemical intermediates in the manufacture of surface active agents alkylalkanolamines, namely, methyl diethanolamine, aminoethyl ethanolamine, and monomethyl ethanolamine for use in industrial and manufacturing applications; alkylalkanolamines, such as methyl diethanolamine, aminoethyl ethanolamine, and monomethyl ethanolamine; amine and amine derivatives for general industrial use, namely, morpholine, n-methylmorpholine, n-ethylmorpholine, n-methylmorpholine oxide, n-aminoethylpiperazine, and 2-(2-aminoethoxy) ethanol; ethanolamines, namely, monoethanolamine, diethanolamine, triethanolamine, and dimethylethanolamine, all for use in industrial and manufacturing applications; amine and amine derivatives for general industrial use, namely, morpholine, n-methylmorpholine, n-ethylmorpholine, n-methylmorpholine oxide, n-aminoethylpiperazine, and 2-(2-aminoethoxy) ethanol; heat transfer fluids for use in a wide variety of industrial uses, metal working fluids containing a glycol, namely ethylene glycol and or propylene glycol, aromatic distillate, auxiliary products for use in the textile industry, namely, fixing agents catalysts for the manufacture of flexible foams, rigid foams, coatings, elastomers, and plastics; catalysts for use in the manufacture of maleic anhydride; chemical additives and surfactants for use as tank-added adjuvants and compatibilizers in the agrochemical field; chemical additives for fuel treatment; chemical additives for use in the manufacture of agrochemicals; chemical additives for use in the manufacture of polymer and copolymer resins; chemical agents for removal of unwanted contaminants from non-liquid gas streams; chemical components for use in the manufacture of polyureas; chemical compound 2-(2-aminoethoxy) ethanol for use as a natural gas treating agent and as a chemical intermediate for the production of surface active agents and polyether polyol condensation polymers; chemical granulates used in the production of thermoplastic polyurethanes for extrusion, injection molding and producing films; chemical motor fuel additives for controlling deposits on internal combustion engines; chemical preparations for stabilizing soil; chemical preparations for use in agriculture, horticulture and forestry, namely chemical preparations for the treatment of seeds; chemical products for use as auxiliary agents in the textile, leather, and paper industries, chemical products for use in the textile, paper, leather, plastics, animal skin and artificial leather industry; chemical products used in industry, namely, unprocessed artificial resins and plastics used as sealants of plastic, rubber and wax, and as release agents in the production of models, molds, tools and other shapes; chemical products used to modify or improve the physical or chemical properties of polyurethane amine catalysts or polyurethane foams; chemicals for manufacturing rigid polyurethanes; chemicals for the preparation of such polyurethane elastomers; chemicals for use as dispersants and stabilizers in the coating, paint, and ink fields; chemicals for use as plasticizers, solvents, thickening agents, frothing agents, hydraulic fluid and chemical intermediates; chemicals for use in industry, all for use in the manufacture of polyurethane foam; chemicals for use in metal treating applications; chemicals for use in the field of oil exploration and production; chemicals for use in the manufacture and treatment of paper, textiles, and fabrics; chemicals for use in the manufacture of ceramic articles; chemicals for use in the manufacture of pesticide and adjuvant formulations; chemicals for use in the manufacture of pharmaceuticals, cosmetics, herbicides, and pesticides; chemicals for use in the manufacture of polyurethanes; chemicals for use in the manufacture or treatment of microchips, circuit boards, and other electronic articles; chemicals for use in the electronics industry; chemicals for use in the mining and mineral processing industries; chemicals for use in the preparation of polyurea and polyurethane systems; chemicals for use in the textile industry, namely, pre-treatment agents, penetrating agents, solvents, wetting agents, emulsifying agents, dispersing agents, and agents for bleaching and scouring; chemicals solvents for equipment cleaning purposes; chemicals used as additives for bleaching agents; stabilizers, namely, dye stabilizers, color stabilizers for textile wetting agents; chemicals used in industry including surface active agents for use in the mining, minerals and mineral treatment industries; chemicals used in the manufacture of textiles, namely, fastness improvers and wet fastness improvers for dyeing textile and fabrics made from cellulose fibers; chemicals used in the manufacture of textiles, paper, leather, animal skin and artificial leather, namely, dye bath conditions; chemicals used in the process of dyeing textiles as fastness improvers and fixing agents; chemicals, namely maleic anhydride; curing agents for use in the manufacture of polymeric materials; detergents for industrial purposes; dyestuffs, coloring matters, chemical products for use as auxiliary agents in the textile industry; epoxy resins; ethanolamines, namely, monoethanolamine, diethanolamine, triethanolamine, and dimethylethanolamine, all for use in industrial and manufacturing applications; ethylene oxide, propylene oxide, and synthetic surface active agents, all for use in detergents, cleaning compounds, paints, agricultural emulsifiers, paper applications, paper deinking, oilfield applications, metal treating applications, corrosion inhibition, mold release agents, and mineral processing; ethylene; flame proofing agents; glycol bottoms, aromatic distillate, glycols, namely, monoethylene glycol, diethylene glycol, triethylene glycol, propylene glycol, dipropylene glycol, and other polyoxyalkylene glycols, polyethylene gycols and polypropylene glycols, all for use in industrial and manufacturing applications; glycols, such as monoethylene glycol, diethylene glycol, triethylene glycol, propylene glycol, dipropylene glycol, and otherheat transfer fluids and metal working fluids, containing a glycol, namely ethylene glycol and propylene glycol; heat transfer fluids containing a glycol, such as ethylene glycol and propylene glycol; hydroxy alkyl carbamates for use in coatings/resins systems in automotive and other applications hydroxy terminated polyoxyalkalene ethers for use as polyurethane raw material and for use in the manufacture of foams, paints, coatings, elastomers, plastics and a wide variety of other industrial uses; ink dispersing agents; isocyanates for use in rigid and flexible foams, elastomers, coatings, adhesives, and composite wood products; maleic anhydride and fumaric acid for use in a wide variety of industrial and manufacturing applications; metal working fluids containing a glycol, such as ethylene glycol and propylene glycol; methyl tertiary butyl ether for use in reformulated motor fuels; mixtures of synthetic latex, synthetic resins, and derivatives of ethyleneamines for use in the manufacture of ceramic composites; mold release agents for natural and synthetic products; motor fuel additives for controlling deposits on internal combustion engines; n-methylmorpholine oxyde, n-aminoethylpiperazine, and 2- (2-aminoethoxy) ethanol; nonylphenol and dinonylphenol for use in the manufacture of surface-active agents or as detergents, light stabilizers, petroleum demulsifiers, oil-soluble phenolic resins, plasticizers, dyestuffs, germicides, insecticides, and aromatic oils; optical bleaching agent organic carbonates, namely, ethylene carbonate and propylene carbonate, for use as solvents for use in a wide variety of industrial uses organic carbonates, such as ethylene carbonate and propylene carbonate, for use as solvents; polyether amines, for use in curing and hardening agents for epoxy resins and adhesives, and in the manufacture of flexible foams, rigid foams, coatings, elastomers, and plastics polyetheramines for use in modifying polymers; polymide and bis-phenol-a compounds for use in the manufacture of synthetic resins; polyols, namely propylene oxide and ethylene oxide based polyols for polyurethane, elastomer, and thermoplastic urethane applications; polyoxyalkylene glycols, polyethylene glycols and polypropylene glycols; polyoxyalkylene glycos for use as chemical intermediates, plasticizers, humectants, and dye carriers; polyoxyalkylene polyamines used as curing and hardening agents for epoxy resins; polyurethane adhesive for use in the automotive industry and for other industrial bonding applications; polyurethane elastomers used in the manufacture of shoes and shoe parts; pre-formed epoxy syntactic inserts to reinforce honeycomb structures; propylene; reduction inhibitors used to protect fabrics and textiles in the dying process; silicone based chemical agents in the textile industry used in treating textiles for textile resilience, textile crease resistance, and for improving sewability and making textiles softer; surface active compounds for general use in industry and manufacturing, namely, as wetting, spreading, emulsifying, dispersing and penetrating agents; surfactants for use in connection with agricultural pesticides; synthetic and formulated polymers for use in industry, namely in coatings, construction, electronics, adhesives, power transmission and distribution, aerospace, wind energy, and automotive applications; synthetic epoxy resins for use in the manufacture of coatings, industrial paint, composites, sealants, laminating, bonding, castings, adhesives and industrial encapsulating compositions; synthetic resin plastics in sheet, rod, tube, granular and/or liquid form for industrial use; synthetic resinous adhesives for bonding metals, glass, ceramics, and/or plastics; synthetic resins for use in the manufacture of coatings, industrial paint, composites, sealants, laminating, bonding, casting and adhesives; synthetic resins in liquid and particle form used by the electronics industry as capsulents, substrates and adhesives for electrical circuit boards and electronic components synthetic resins in solid or liquid form for use in the manufacture of polymeric products, namely, polyurethanes and polyureas for use in further manufacture; synthetic surface active agents used in detergents, cleaning compounds, paints, agricultural emulsifiers, paper applications, paper deinking, oilfield applications, metal treating applications, corrosion inhibition, mold release agents, and mineral processing; systems comprising chemical components for manufacturing polyurethane, and the chemical components of said system sold separately and in any combination; textile finishing chemicals and catalysts employed in their application; thermoplastic polyurethane granulates for use in extrusion, injection molding and producing films; unprocessed artificial resins and plastics for the production of models, molds, tools and other shapes; unprocessed artificial resins and synthetic resin plastics in the form of powders, pastes, liquids, emulsions, dispersions, pellets and granulates; unprocessed thermoplastic polyurethane polymers for use in coating magnetic tapes washing and bleaching agents for industrial purposes

In International Class 001, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 07/01/1994, and first used in commerce at least as early as 07/01/1994, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) a picture of a label displaying the mark and a picture of a label on the product.

Original PDF file:
SPE0-2052351044-20190301160935117789_._02272019_-_HUNTSMAN_Specimen.pdf
Converted PDF file(s) (1 page)
Specimen File1
Original PDF file:
SPE0-2052351044-20190301160935117789_._02272019_-_HUNTSMAN_Specimen2.pdf
Converted PDF file(s) (1 page)
Specimen File1

       International Class 002:  cross-linking agents used for ink and dyes in the production of textiles, de-aerating agents used for ink and dyes in production of textiles, fabric softening agents, discharging agents used to treat fabrics and textiles depth, brightness, and penetrating enhancers for inks and dyes; disperse dyes for use in automotive fabrics; dyes and dyestuffs; dyes for polyimide carpet and textiles; dyes for use in the manufacture of wool, nylon and silk fibers; dyes for use with or on textiles; dyestuffs; chemical products suitable for dyeing purposes; ink and dye diluents; ink and printing binding agents for textiles ink and printing thickeners for textiles; pre-coating agents used in conjunction with inks and dyes for the production of textiles; textile dyes

In International Class 002, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 07/03/2006, and first used in commerce at least as early as 07/03/2006, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) A picture of a label displaying the mark on the product.

Original PDF file:
SPE0-2052351044-20190301160935117789_._03012019_-_HUNTSMAN_specimen_cl2.pdf
Converted PDF file(s) (1 page)
Specimen File1

       International Class 009:  computer program for designing and evaluating amine-based gas and liquid testing plants through process simulation

In International Class 009, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 02/15/1992, and first used in commerce at least as early as 02/15/1992, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) a PDF of the owners manual displaying the mark.

Original PDF file:
SPE0-1-2052351044-20190301160935117789_._03012019_-_HUNTSMAN_specimen_cl9.pdf
Converted PDF file(s) (5 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5

       International Class 016:  adhesives for stationery and household purposes

In International Class 016, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 08/01/2003, and first used in commerce at least as early as 08/01/2003, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) a picture of a label displaying the mark on the product.

Original PDF file:
SPE0-2052351044-20190301160935117789_._03012019_-_HUNTSMAN_specimen_cl16.pdf
Converted PDF file(s) (7 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5
Specimen File6
Specimen File7

       International Class 019:  thermoplastic polyurethanes for use in injection molding of footwear and footwear components; semi-finished plastics, plastics for use in the manufacture of footwear, clothing, and sports equipment

In International Class 019, the mark was first used by the applicant or the applicant's related company or licensee or predecessor in interest at least as early as 12/08/2000, and first used in commerce at least as early as 12/08/2000, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) a PDF of the product safety data sheet displaying the mark.

Original PDF file:
SPE0-1-2052351044-20190301160935117789_._03012019_-_HUNTSMAN_specimen_cl19.pdf
Converted PDF file(s) (3 pages)
Specimen File1
Specimen File2
Specimen File3


The applicant's current Attorney Information:
      Bryan D. Adams and Ron D. Brown of Huntsman International LLC      10003 Woodloch Forest Drive
      The Woodlands, Texas 77380
      United States
      bryan_adams@huntsman.com (authorized)

The applicant's current Correspondence Information:

Bryan D. Adams

Huntsman International LLC

10003 Woodloch Forest Drive

The Woodlands, Texas 77380

bryan_adams@huntsman.com;trademarks@huntsman.com (authorized) E-mail Authorization: I authorize the USPTO to send e-mail correspondence concerning the application to the applicant, the applicant's attorney, or the applicant's domestic representative at the e-mail address provided in this application. I understand that a valid e-mail address must be maintained and that the applicant or the applicant's attorney must file the relevant subsequent application-related submissions via the Trademark Electronic Application System (TEAS). Failure to do so will result in the loss of TEAS Reduced Fee status and a requirement to submit an additional processing fee of $125 per international class of goods/services.

A fee payment in the amount of $1375 has been submitted with the application, representing payment for 5 class(es).

Declaration

	Basis: If the applicant is filing the application based on use in commerce under 15 U.S.C. § 1051(a): The signatory believes that the applicant is the owner of the trademark/service mark sought to be registered; The mark is in use in commerce on or in connection with the goods/services in the application; The specimen(s) shows the mark as used on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate. And/Or If the applicant is filing the application based on an intent to use the mark in commerce under 15 U.S.C. § 1051(b), § 1126(d), and/or § 1126(e): The signatory believes that the applicant is entitled to use the mark in commerce; The applicant has a bona fide intention to use the mark in commerce on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate.
	To the best of the signatory's knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive.
	To the best of the signatory's knowledge, information, and belief, formed after an inquiry reasonable under the circumstances, the allegations and other factual contentions made above have evidentiary support.
	The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.

Declaration Signature

Signature: /Bryan D. Adams/   Date: 03/04/2019
Signatory's Name: Bryan D. Adams
Signatory's Position: Attorney for Applicant
Payment Sale Number: 88324885
Payment Accounting Date: 03/05/2019

Serial Number: 88324885
Internet Transmission Date: Mon Mar 04 18:00:26 EST 2019
TEAS Stamp: USPTO/BAS-XXX.XXX.XXX.X-2019030418002617
3740-88324885-620ce45d97f5031ebac9e5fe24
d185a8337c5542486ed55bfc9bb579fddb566773
-CC-5602-20190301160935117789