UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

 

ISSUE/MAILING DATE: 5/16/2019

 

 

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issues below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SUMMARY OF ISSUES

• Section 2(d) Refusal – Likelihood of Confusion
• Identification and Classification of Goods
• Mark Description
• Request for Information – General Inquiry on Significance

 

SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION

 

Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 5,669,164.  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the attached registration.

 

Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods of the parties.  See 15 U.S.C. §1052(d).  Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”).  In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017).  Only those factors that are “relevant and of record” need be considered.  M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018). 

 

Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis:  (1) the similarities between the compared marks and (2) the relatedness of the compared goods.  See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.

 

SIMILARITIES BETWEEN THE MARKS

 

Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression.  Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v).  “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.”  In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014)); TMEP §1207.01(b).

 

Applicant’s applied-for mark is a stylized word-design mark featuring the wording “MOTEK” for “measuring devices, motion control and industrial products” in International Class 8.

 

Registrant’s mark is “MOUTEC” for “Binoculars; Close-up lenses; Cover glass for microscope slides; Diffusers for use in photography; Filters for ultraviolet rays, for photography; Infrared detectors; Lenses for astrophotography; Magnifying glasses; Measuring apparatus, namely, laser distance meters; Microscopes; Monopods used to take photographs by positioning a smartphone or camera beyond the normal range of the arm; Optical lens sights; Optical cables; Optical character recognition (OCR) apparatus; Optical couplers; Optical fibers; Optical lamps; Optical lanterns; Optical lenses; Optical reflectors; Optical shutters; Range finders for cameras; Sighting telescopes for firearms; Stands for photographic apparatus; Stereoscopes; Telemeters; Telescopes; Telescopic sights for artillery; Thermal imaging cameras; Tripods for cameras; Distance measuring apparatus; Lens filters” in International Class 9.

 

When comparing marks, “[t]he proper test is not a side-by-side comparison of the marks, but instead whether the marks are sufficiently similar in terms of their commercial impression such that [consumers] who encounter the marks would be likely to assume a connection between the parties.”  Cai v. Diamond Hong, Inc., __ F.3d __, 127 USPQ2d 1797, 1801 (Fed. Cir. 2018) (quoting Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1368, 101 USPQ2d 1713, 1721 (Fed. Cir. 2012)); TMEP §1207.01(b).  The proper focus is on the recollection of the average purchaser, who retains a general rather than specific impression of trademarks.  In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re St. Helena Hosp., 774 F.3d 747, 750-51, 113 USPQ2d 1082, 1085 (Fed. Cir. 2014); Geigy Chem. Corp. v. Atlas Chem. Indus., Inc., 438 F.2d 1005, 1007, 169 USPQ 39, 40 (CCPA 1971)); TMEP §1207.01(b).

 

The marks are essentially phonetic equivalents and thus sound similar.  Similarity in sound alone may be sufficient to support a finding that the marks are confusingly similar.  In re White Swan Ltd., 8 USPQ2d 1534, 1535 (TTAB 1988); see In re 1st USA Realty Prof’ls, Inc., 84 USPQ2d 1581, 1586 (TTAB 2007); TMEP §1207.01(b)(iv).

 

Based on the foregoing, the applicant’s applied-for and registrant’s marks are sufficiently similar to find a likelihood of confusion.

 

RELATEDNESS OF THE GOODS

 

The goods are compared to determine whether they are similar, commercially related, or travel in the same trade channels.  See Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369-71, 101 USPQ2d 1713, 1722-23 (Fed. Cir. 2012); Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1165, 64 USPQ2d 1375, 1381 (Fed. Cir. 2002); TMEP §§1207.01, 1207.01(a)(vi).

 

The compared goods need not be identical or even competitive to find a likelihood of confusion.  See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000); TMEP §1207.01(a)(i).  They need only be “related in some manner and/or if the circumstances surrounding their marketing are such that they could give rise to the mistaken belief that [the goods] emanate from the same source.”  Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).

 

Determining likelihood of confusion is based on the description of the goods stated in the application and registration at issue, not on extrinsic evidence of actual use.  See In re Detroit Athletic Co., 903 F.3d 1297, 1307, 128 USPQ2d 1047, 1052 (Fed. Cir. 2018) (citing In re i.am.symbolic, llc, 866 F.3d 1315, 1325, 123 USPQ2d 1744, 1749 (Fed. Cir. 2017)).  

 

In this case, the application uses the very broad wording “measuring devices, motion control and industrial products”, which could include many of registrant’s more narrowly defined goods such as “Measuring apparatus, namely, laser distance meters”, among others.  See, e.g., In re Solid State Design Inc., 125 USPQ2d 1409, 1412-15 (TTAB 2018); Sw. Mgmt., Inc. v. Ocinomled, Ltd., 115 USPQ2d 1007, 1025 (TTAB 2015).  Thus, applicant’s and registrant’s goods are legally identical.  See, e.g., In re i.am.symbolic, llc, 127 USPQ2d 1627, 1629 (TTAB 2018) (citing Tuxedo Monopoly, Inc. v.Gen. Mills Fun Grp., Inc., 648 F.2d 1335, 1336, 209 USPQ 986, 988 (C.C.P.A. 1981); Inter IKEA Sys. B.V. v. Akea, LLC, 110 USPQ2d 1734, 1745 (TTAB 2014); Baseball Am. Inc. v. Powerplay Sports Ltd., 71 USPQ2d 1844, 1847 n.9 (TTAB 2004)).

 

Additionally, the goods of the parties have no restrictions as to nature, type, channels of trade, or classes of purchasers and are “presumed to travel in the same channels of trade to the same class of purchasers.”  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)).  Thus, applicant’s and registrant’s goods are related.

 

Based on the analysis above, applicant’s and registrant’s goods are related.

 

Because applicant’s and registrant’s marks are similar and the goods are related, there is a likelihood of confusion and applicant’s applied-for mark must be refused under Section 2(d) of the Lanham Act.

 

Although applicant’s mark has been refused registration, applicant may respond to the refusal by submitting evidence and arguments in support of registration.  However, if applicant responds to the refusal, applicant must also respond to the requirements set forth below.

 

IDENTIFICATION AND CLASSIFICATION OF GOODS

 

The Class 8 wording “measuring devices, motion control and industrial products” in the identification of goods is indefinite and must be clarified because the nature of the products, such as whether the measuring devices are in the nature of measuring buckets or some other measuring device; whether the “motion control” goods are security motion detectors; and whether the industrial products are in the nature of hand-operated atomizers or some other type of product.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01. 

 

Furthermore, the wording is too broad and could include goods in other international classes.  See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03.  In particular, this wording could encompass various Class 9 measuring devices and industrial products in many classes, such as Class 11 industrial furnaces.

 

Applicant may substitute the following wording, if accurate:  ‘

 

Class 9: Measuring devices in the nature of electronic sensors for measuring solar radiation, motion control devices in the nature of security motion detectors, and industrial products in the nature of lasers for industrial use.

 

Applicant may amend the identification to clarify or limit the goods, but not to broaden or expand the goods beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods may not later be reinserted.  See TMEP §1402.07(e).

 

For assistance with identifying and classifying goods in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

MARK DESCRIPTION

 

Applicant must submit an amended description of the mark because the current one is incomplete and does not describe all the significant aspects of the mark.  37 C.F.R. §2.37; see TMEP §§808.01, 808.02.  Descriptions must be accurate and identify all the literal and design elements in the mark.  See 37 C.F.R. §2.37; TMEP §§808 et seq. 

 

The following description is suggested, if accurate:  The mark consists of the stylized wording “MOTEK”, with “M” being shaded, the letters “OTEK” appearing on a shaded background which culminates in a rightward pointing arrow, with “O” being shaded and forming the left end of the design, with the interior of the “O” being unshaded, and “TEK” being unshaded.  To the right of the design are two shaded stylized arrow designs.

 

REQUEST FOR INFORMATION – GENERAL INQUIRY ON SIGNIFICANCE

 

To permit proper examination of the application, applicant must provide the following information:

 

(1)  Explain whether the wording in the mark “MOTEK” has any meaning or significance in the industry in which the goods are manufactured/provided, any meaning or significance as applied to applicant’s goods, or if such wording is a term of art within applicant’s industry. 

 

(2)  Explain whether this wording identifies a geographic place or has any meaning in a foreign language. 

 

(3)  Submit an English translation of all foreign wording in a mark and a transliteration (the phonetic spelling of the pronunciation, in Latin characters) of all non-Latin characters in a mark.  If the wording does not have meaning in a foreign language, applicant should so specify.   

 

The format for an English translation and transliteration:  The English translation of “MOTEK” is “{indicate translation}”. 

 

The format for when there is no English translation:  The wording “MOTEK” has no meaning in a foreign language. 

 

(4)  Respond to the following questions:

- What does this wording mean?

 

See 37 C.F.R. §§2.32(a)(9)-(a)(10), 2.61(b); TMEP §§809-809.03, 814. 

 

Failure to comply with a request for information is grounds for refusing registration.  In re Harley, 119 USPQ2d 1755, 1757-58 (TTAB 2016); TMEP §814.

 

ASSISTANCE

 

Please call or email the assigned trademark examining attorney with questions about this Office action.  Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the refusals and requirements in this Office action.  See TMEP §§705.02, 709.06.  Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. 

 

 

/John S. Miranda/

Trademark Examining Attorney, Law Office 120

United States Patent and Trademark Office

571-272-4553

John.Miranda@USPTO.GOV

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 5/16/2019 FOR U.S. APPLICATION SERIAL NO. 88320627

 

Your trademark application has been reviewed.  The trademark examining attorney assigned by the USPTO to your application has written an official letter to which you must respond.  Please follow these steps:

 

(1)  Read the LETTER by clicking on this link or going to http://tsdr.gov.uspto.report/, entering your U.S. application serial number, and clicking on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification. 

 

(2)  Respond within 6 months (or sooner if specified in the Office action), calculated from 5/16/2019, using the Trademark Electronic Application System (TEAS) response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  A response transmitted through TEAS must be received before midnight Eastern Time of the last day of the response period.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions. 

 

(3)  Questions about the contents of the Office action itself should be directed to the trademark examining attorney who reviewed your application, identified below. 

 

/John S. Miranda/

Trademark Examining Attorney, Law Office 120

United States Patent and Trademark Office

571-272-4553

John.Miranda@USPTO.GOV

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp. 

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.