UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

 

ISSUE/MAILING DATE: 5/23/2019

 

 

 

The referenced application has been reviewed by the assigned trademark examining attorney.  This application was accidentally approved for publication on May 14, 2019.  However, approval of the application has been withdrawn to address the issues below.  See TMEP §706.01. The Trademark Examining Attorney apologizes for any confusion and delay this may have caused applicant. Applicant must respond timely and completely to the issues below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SUMMARY OF ISSUES:

• TRADEMARK ACT SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION WITH REGISTERED MARK
• TRADEMARK ACT SECTION 2(e)(1) REFUSAL – APPLIED-FOR MARK IS MERELY DESCRIPTIVE
• REFUSAL OF REGISTRATION – SPECIMEN DOES NOT SHOW APPLIED-FOR MARK IN USE IN COMMERCE
• REQUEST FOR INFORMATION

 

TRADEMARK ACT SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION WITH REGISTERED MARK

 

Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 1845348 (ULTRALITE).  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the attached registration.

                                    

Trademark Act Section 2(d) bars registration of an applied-for mark that is so similar to a registered mark that it is likely consumers would be confused, mistaken, or deceived as to the commercial source of the goods of the parties.  See 15 U.S.C. §1052(d).  Likelihood of confusion is determined on a case-by-case basis by applying the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) (called the “du Pont factors”).  In re i.am.symbolic, llc, 866 F.3d 1315, 1322, 123 USPQ2d 1744, 1747 (Fed. Cir. 2017).  Only those factors that are “relevant and of record” need be considered.  M2 Software, Inc. v. M2 Commc’ns, Inc., 450 F.3d 1378, 1382, 78 USPQ2d 1944, 1947 (Fed. Cir. 2006) (citing Shen Mfg. Co. v. Ritz Hotel Ltd., 393 F.3d 1238, 1241, 73 USPQ2d 1350, 1353 (Fed. Cir. 2004)); see In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1744 (TTAB 2018). 

 

Although not all du Pont factors may be relevant, there are generally two key considerations in any likelihood of confusion analysis:  (1) the similarities between the compared marks and (2) the relatedness of the compared goods.  See In re i.am.symbolic, llc, 866 F.3d at 1322, 123 USPQ2d at 1747 (quoting Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1164-65, 64 USPQ2d 1375, 1380 (Fed. Cir. 2002)); Federated Foods, Inc. v. Fort Howard Paper Co.,544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976) (“The fundamental inquiry mandated by [Section] 2(d) goes to the cumulative effect of differences in the essential characteristics of the goods [or services] and differences in the marks.”); TMEP §1207.01.

 

Comparison of the Marks

 

Applicant’s mark is ULTRALITE in standard character form.

 

Registrant’s mark is ULTRALITE in typed form.

 

In a likelihood of confusion determination, the marks in their entireties are compared for similarities in appearance, sound, connotation, and commercial impression.  In re i.am.symbolic, llc, 866 F.3d 1315, 1323, 123 USPQ2d 1744, 1748 (Fed. Cir. 2017); Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973); TMEP §1207.01(b)-(b)(v). 

 

In the present case, applicant’s mark is ULTRALITE and registrant’s mark is ULTRALITE.  These marks are identical in appearance, sound, and meaning, “and have the potential to be used . . . in exactly the same manner.” In re i.am.symbolic, llc, 116 USPQ2d 1406, 1411 (TTAB 2015), aff’d, 866 F.3d 1315, 123 USPQ2d 1744 (Fed. Cir. 2017).  Additionally, because they are identical, these marks are likely to engender the same connotation and overall commercial impression when considered in connection with applicant’s and registrant’s respective goods.  Id.

 

Thus, the marks are confusingly similar.

 

Comparison of Goods

 

The goods are related.

 

Applicant's goods are as follows:

 

INTERNATIONAL CLASS 007: Cutting machines; Cutting machines for metalworking; Plasma etching machines; Electric plasma cutters; Plasma cutting machines

 

Registrant's goods are as follows:

 

INTERNATIONAL CLASS 007: hand pneumatic tools; namely, rivet hammers, air drills, nut plate drill motors and compression riveters

 

The compared goods need not be identical or even competitive to find a likelihood of confusion.  See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000); TMEP §1207.01(a)(i).  They need only be “related in some manner and/or if the circumstances surrounding their marketing are such that they could give rise to the mistaken belief that [the goods] emanate from the same source.”  Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).

 

Applicant's and registrant's goods are related because tool manufacturers manufacture make pneumatic hand tools and cutting machines.  The attached Internet evidence, consisting of screen shots from the websites of tool manufacturers, establishes that the same entity commonly manufactures the relevant goods and markets the goods under the same mark.  Thus, applicant’s and registrant’s goods are considered related for likelihood of confusion purposes.  See, e.g., In re Davey Prods. Pty Ltd., 92 USPQ2d 1198, 1202-04 (TTAB 2009); In re Toshiba Med. Sys. Corp., 91 USPQ2d 1266, 1268-69, 1271-72 (TTAB 2009).

 

Please see evidence from:

·       CHICAGO PNEUMATIC® (http://www.cp.com/en-us), offering:

o   RIVET HAMMERS: http://www.cp.com/en-us/tools/products/percussivetools/rivet-hammers/cp4282

o   AIR DRILL: http://www.cp.com/en-us/tools/products/drills/cp1117p05

o   COMPRESSION RIVETERS: http://www.cp.com/en-us/tools/products/compression-tools/cp4210al

o   CUTTING MACHINES: http://www.cp.com/en-us/tools/products/specialtycutting/cp874

·       DEWALT® (http://www.dewalt.com/), offering:

o   AIR DRILL: http://www.dewalt.com/products/power-tools/air-tools/38-reversible-drill/dwmt70786l

o   RIVET HAMMER: http://www.dewalt.com/products/power-tools/air-tools/chisel-hammer/dwmt70785

o   CUTTING MACHINES: http://www.dewalt.com/products/power-tools/saws/table-saws/10-in-table-saw-with-scissor-stand/dwe7491x

·       INGERSOLL RAND® (http://www.ingersollrandproducts.com/en-us.html), offering:

o   RIVET HAMMERS: http://www.ingersollrandproducts.com/en-us/power-tools/products/air-hammers/132-super-duty.html

o   AIR DRILL: http://www.ingersollrandproducts.com/en-us/power-tools/products/drilling-tools/1-2-air.html

o   CUTTING MACHINES: http://www.ingersollrandproducts.com/en-us/power-tools/products/air-cutting-tools/12v-recip-saw.html

 

To the extent the evidence may not address all of the goods in applicant’s identification, relatedness does not have to be established for every good in an identification.  It is sufficient for a finding of likelihood of confusion if relatedness is established for any or some goods encompassed by the identification within a particular class in an application. Tuxedo Monopoly, Inc. v. General Mills Fun Group, 648 F.2d 1335, 209 USPQ 986, 988 (CCPA 1981).  In this case, relatedness has been established for many of the identified goods, which is enough to show a likelihood of confusion.

 

Conclusion

 

Where the marks of the respective parties are identical or virtually identical, as in this case, the degree of similarity or relatedness between the goods needed to support a finding of likelihood of confusion declines.  See In re i.am.symbolic, llc, 116 USPQ2d 1406, 1411 (TTAB 2015) (citing In re Shell Oil Co., 992 F.2d 1204, 1207, 26 USPQ2d 1687, 1689 (Fed. Cir. 1993)), aff’d, 866 F.3d 1315, 123 USPQ2d 1744 (Fed. Cir. 2017); TMEP §1207.01(a).

 

Thus, upon encountering the marks ULTRALITE and ULTRALITE as used on the identified goods, consumers are likely to be confused and mistakenly believe that the respective goods emanate from a common source. Therefore, applicant’s mark is not entitled to registration because of a likelihood of confusion with the mark in U.S. Registration No. 1845348 (ULTRALITE).  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq. 

 

Applicant should note the following additional ground for refusal.

 

 

TRADEMARK ACT SECTION 2(e)(1) REFUSAL – APPLIED-FOR MARK IS MERELY DESCRIPTIVE

 

Registration is refused because the applied-for mark merely describes a characteristic of applicant’s goods.  Trademark Act Section 2(e)(1), 15 U.S.C. §1052(e)(1); see TMEP §§1209.01(b), 1209.03 et seq.

 

A mark is merely descriptive if it describes an ingredient, quality, characteristic, function, feature, purpose, or use of an applicant’s goods.  TMEP §1209.01(b); see, e.g., In re TriVita, Inc., 783 F.3d 872, 874, 114 USPQ2d 1574, 1575 (Fed. Cir. 2015) (quoting In re Oppedahl & Larson LLP, 373 F.3d 1171, 1173, 71 USPQ2d 1370, 1371 (Fed. Cir. 2004)); In re Steelbuilding.com, 415 F.3d 1293, 1297, 75 USPQ2d 1420, 1421 (Fed. Cir. 2005) (citing Estate of P.D. Beckwith, Inc. v. Comm’r of Patents, 252 U.S. 538, 543 (1920)). 

 

Applicant has applied to register the mark ULTALITE for use in connection with the following goods:

 

INTERNATIONAL CLASS 0XX: Cutting machines; Cutting machines for metalworking; Plasma etching machines; Electric plasma cutters; Plasma cutting machines

 

Applicant's mark ULTRALITE is the phonetic equivalent of ULTRALIGHT. A novel spelling or an intentional misspelling that is the phonetic equivalent of a merely descriptive word or term is also merely descriptive if purchasers would perceive the different spelling as the equivalent of the descriptive word or term.  See In re Quik-Print Copy Shop, Inc., 616 F.2d 523, 526 & n.9, 205 USPQ 505, 507 & n.9 (C.C.P.A. 1980) (holding “QUIK-PRINT,” phonetic spelling of “quick-print,” merely descriptive of printing and photocopying services); In re Calphalon Corp., 122 USPQ2d 1153, 1163 (TTAB 2017) (holding “SHARPIN”, phonetic spelling of “sharpen,” merely descriptive of cutlery knife blocks with built-in sharpeners); In re Carlson, 91 USPQ2d 1198, 1203 (TTAB 2009) (holding “URBANHOUZING,” phonetic spelling of “urban” and “housing,” merely descriptive of real estate services); TMEP §1209.03(j). According to the Merriam-Webster Dictionary, the term ULTRALIGHT is defined as "extremely light in mass or weight".  See attached evidence from http://www.merriam-webster.com/dictionary/ultralight. Therefore, when used in relation to applicant's goods, the term is merely descriptive of a characteristic, namely, the cutting machines, plasma etching machines, and plasma cutting machines are very lightweight.

 

Thus, the mark ULTRALITE, as applied to the identified goods, is merely descriptive.  Accordingly, registration of the applied-for mark is refused on the Principal Register under Section 2(e)(1).

 

Applicant should note the following additional ground for refusal.

 

 

ADVISORY: AMENDMENT TO SUPPLEMENTAL REGISTER SUGGESTED

 

The applied-for mark has been refused registration on the Principal Register.  Applicant may respond to the refusal by submitting evidence and arguments in support of registration and/or by amending the application to seek registration on the Supplemental Register.  See 15 U.S.C. §1091; 37 C.F.R. §§2.47, 2.75(a); TMEP §§801.02(b), 816.  Amending to the Supplemental Register does not preclude applicant from submitting evidence and arguments against the refusal(s).  TMEP §816.04.

 

Although registration on the Supplemental Register does not afford all the benefits of registration on the Principal Register, it does provide the following advantages to the registrant:

 

(1)       Use of the registration symbol ® with the registered mark in connection with the designated goods, which provides public notice of the registration and potentially deters third parties from using confusingly similar marks.

 

(2)       Inclusion of the registered mark in the USPTO’s database of registered and pending marks, which will (a) make it easier for third parties to find it in trademark search reports, (b) provide public notice of the registration, and thus (c) potentially deter third parties from using confusingly similar marks.

 

(3)       Use of the registration by a USPTO trademark examining attorney as a bar to registering confusingly similar marks in applications filed by third parties.

 

(4)       Use of the registration as a basis to bring suit for trademark infringement in federal court, which, although more costly than state court, means judges with more trademark experience, often faster adjudications, and the opportunity to seek an injunction, actual damages, and attorneys’ fees and costs.

 

(5)       Use of the registration as a filing basis for a trademark application for registration in certain foreign countries, in accordance with international treaties.

 

See 15 U.S.C. §§1052(d), 1091, 1094; J. Thomas McCarthy, McCarthy on Trademarks & Unfair Competition §§19:33, 19:37 (rev. 4th ed. Supp. 2017).

 

Note: Amending to the Supplemental Register WILL NOT obviate the Trademark Act Section 2(d) refusal.

 

 

REFUSAL OF REGISTRATION – SPECIMEN DOES NOT SHOW APPLIED-FOR MARK IN USE IN COMMERCE

 

Registration is refused because the applied-for mark does not appear anywhere on the specimen for International Class 7 and thus fails to show the applied-for mark in use in commerce for each international class.  Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a), 1301.04(f)(i), (g)(i).  An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark in use in commerce for each international class of goods identified in the application or amendment to allege use.  15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). 

 

Examples of specimens for goods include tags, labels, instruction manuals, containers, photographs that show the mark on the actual goods or packaging, and displays associated with the actual goods at their point of sale.  See TMEP §§904.03 et seq.  Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods.  TMEP §904.03(i). 

 

Applicant may respond to this refusal by satisfying one of the following for each applicable international class:

 

(1)       Submit a different specimen (a verified “substitute” specimen) that (a) shows the applied-for mark in use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use and (b) shows the mark in actual use in commerce for the goods identified in the application or amendment to allege use.  A “verified substitute specimen” is a specimen that is accompanied by the following statement made in a signed affidavit or supported by a declaration under 37 C.F.R. §2.20:  “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce at least as early as the filing date of the application or prior to the filing of the amendment to allege use.”  The substitute specimen cannot be accepted without this statement.

 

(2)       Amend the filing basis to intent to use under Section 1(b), for which no specimen is required.  This option will later necessitate additional fees and filing requirements such as providing a specimen.

 

For an overview of both response options referenced above and instructions on how to satisfy either option online using the Trademark Electronic Application System (TEAS) form, please go to http://www.gov.uspto.report/trademarks/law/specimen.jsp.

 

HOW TO SUBMIT A VERIFIED SUBSTITUTE SPECIMEN

 

To submit a verified substitute specimen online using the Trademark Electronic Application System (TEAS) response form, (1) answer “Yes” to form wizard question #2; and then, continuing on to the next portion of the form, under the heading “Classification and Listing of Goods/Services/Collective Membership Organization,” do the following for each relevant class for which a specimen is being submitted:  (2) check the box next to the following statement:  “Check here to modify the current classification number; listing of goods/services/the nature of the collective membership organization; dates of use; and/or filing basis; or to submit a substitute specimen, a foreign registration certificate, or proof of renewal of a foreign registration.  If not checked, the changes will be ignored.”; (3) under “Specimen File,” attach a specimen (attachment may not exceed 5 megabytes); (4) describe in the box below where you attached the file what the specimen consists of; and (5) check the box next to the following statement below the specimen description (to ensure that the declaration language is inserted into the form): “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce at least as early as the filing date of the application” [for an application based on Section 1(a), Use in Commerce] OR “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce prior either to the filing of the Amendment to Allege Use or expiration of the filing deadline for filing a Statement of Use” [for an application based on Section 1(b) Intent-to-Use].  Additionally, when submitting a verified specimen, the TEAS online form requires two signatures: one in the “Declaration Signature” section and one in the “Response Signature” section.

 

Although applicant’s mark has been refused registration, applicant may respond to the refusals by submitting evidence and arguments in support of registration.  However, if applicant responds to the refusals, applicant must also respond to the requirement set forth below.

 

 

REQUEST FOR INFORMATION

 

Due to the descriptive nature of the applied-for mark, applicant must provide the following information and documentation regarding the goods and wording appearing in the mark: 

 

(1)       Fact sheets, instruction manuals, brochures, advertisements and pertinent screenshots of applicant’s website as it relates to the goods in the application, including any materials using the terms in the applied-for mark.  Merely stating that information about the goods is available on applicant’s website is insufficient to make the information of record.; 

 

(2)       If these materials are unavailable, applicant should submit similar documentation for goods and services of the same type, explaining how its own product or services will differ.  If the goods feature new technology and information regarding competing goods is not available, applicant must provide a detailed factual description of the goods.  Factual information about the goods must make clear how they operate, salient features, and prospective customers and channels of trade.  For services, the factual information must make clear what the services are and how they are rendered, salient features, and prospective customers and channels of trade.  Conclusory statements will not satisfy this requirement.; and

 

(3)       Applicant must respond to the following questions:

 

1.     Does the wording “ULTRALITE”, "ULTRA LITE", "ULTRALIGHT", or "ULTRA LIGHT" have any significant meaning in relation to applicant’s goods? Please explain.

2.     Does the wording “ULTRALITE”, "ULTRA LITE", "ULTRALIGHT", or "ULTRA LIGHT” have any significant meaning in applicant's industry? Please explain.

3.     Are the applicant's goods light weight? Please explain.

4.     Do applicant’s competitors use the terms ““ULTRALITE”, "ULTRA LITE", "ULTRALIGHT", or "ULTRA LIGHT” to advertise similar goods?

 

See 37 C.F.R. §2.61(b); TMEP §§814, 1402.01(e). 

 

Failure to comply with a request for information is grounds for refusing registration.  In re Harley, 119 USPQ2d 1755, 1757-58 (TTAB 2016); TMEP §814. 

 

 

RESPONSE GUIDELINES

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

ASSISTANCE

 

Please call or email the assigned trademark examining attorney with questions about this Office action.  Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the refusals and/or requirement in this Office action.  See TMEP §§705.02, 709.06.  Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. 

 

 

 

/Aubrey Biache/

Examining Attorney

Trademark Law Office 123

(571) 270-0120

aubrey.biache@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 5/23/2019 FOR U.S. APPLICATION SERIAL NO. 88305584

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 5/23/2019 (or sooner if specified in the Office action).  A response transmitted through the Trademark Electronic Application System (TEAS) must be received before midnight Eastern Time of the last day of the response period.  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the TEAS response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.