Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88296711 SOCOSEAL(Standard Characters, see http://uspto.report/TM/88296711/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES

Applicant hereby deletes the following class of goods/services from the application.
Class 002 for Fillers in the nature of paint; filler primers for metal and composite surfaces repair; filler primers for use in the aerospace industry; mastic being natural or synthetic resin

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 001 for Synthetic resin adhesives for laminating purposes; synthetic resin adhesives for industrial purposes; pressure sensitive adhesive tapes; chemicals for use in making adhesive substances; mastics for use in bonding; paste fillers for use in the aerospace industry; sealant mastics for use in industry; putties, and paste fillers for use in industry; paste fillers for automobile body repair; glaziers' putty; chemical additives for the flow control of sealants; paste fillers for vehicle body and tyre repair; mastic adhesives for tyres
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Synthetic resin adhesives for laminating purposes; synthetic resin adhesives for industrial purposes; pressure sensitive adhesive tapes; chemicals for use in the manufacture of adhesives, paste adhesives for use in bonding, namely, for Injection and fillet sealing; chemicals for use in making adhesive substances; paste fillers for use in the aerospace industry, namely, for edge and honeycomb core filling, honeycomb and edge finishing; mastics for use in bonding; sealant paste for use in industry, namely, aerospace sealant paste mastic; paste fillers for use in the aerospace industry; putties, namely, replication materials and surface/edge repair putty; sealant mastics for use in industry; paste fillers for use in industry, namely, for surface/edge repair for aircraft fuselage or automotive; putties, and paste fillers for use in industry; paste fillers for automobile body repair; glaziers' putty; chemical additives for the flow control of sealants; paste fillers for vehicle body; paste fillers for vehicle body and tyre repair; mastic adhesives for tyresClass 001 for Synthetic resin adhesives for laminating purposes; synthetic resin adhesives for industrial purposes; chemicals for use in the manufacture of adhesives, paste adhesives for use in bonding, namely, for Injection and fillet sealing; paste fillers for use in the aerospace industry, namely, for edge and honeycomb core filling, honeycomb and edge finishing; sealant paste for use in industry, namely, aerospace sealant paste mastic; putties, namely, replication materials and surface/edge repair putty; paste fillers for use in industry, namely, for surface/edge repair for aircraft fuselage or automotive; paste fillers for automobile body repair; glaziers' putty; chemical additives for the flow control of sealants; paste fillers for vehicle body
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 017 for Adhesive-coated plastic strips for use in manufacture; adhesive-coated plastic foils for use in manufacture; adhesive strips for use in industry; adhesive materials in the form of bands; insulating mastics; insulating materials; insulating tapes; insulating coatings; stopping or barrier materials; sealant compounds for joints; caulking compounds; polyurethane sealants; silicone sealants; adhesive sealant and caulking compounds; sealants for sealing joints; sealing compounds; mastics for sealing joints; weatherstripping sealants in the nature of caulk; sealants for seams in vehicle bodywork; mastic compositions for sealing and jointing; metal faced bituminous mastic sealing strip; padding materials of rubber or plastics; anti-corrosion tape
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Adhesive-coated plastic strips for use in manufacture; adhesive-coated plastic foils for use in manufacture; adhesive strips for use in industry; adhesive strips in the nature of adhesive plastic film for use in commercial or industrial manufacturing; adhesive materials in the form of bands; adhesive materials in the form of adhesive bands other than stationery and not for medical or household purposes; insulating mastics; insulating mastics, namely, insulating sealant paste for filling of voids, crevices and gaps in aircraft and automotive manufacturing; insulating materials; insulating tapes; insulating coatings; stopping or barrier materials; stopping or barrier sealant paste, all in the nature of sealant compounds for joints; sealant compounds for joints; caulking compounds; polyurethane sealants; silicone sealants; adhesive sealant and caulking compounds; sealants for sealing joints, faying surfaces, crevices, gaps and voids encountered in aircraft assembles for fuselage and structural components; sealants for sealing joints; aircraft and automotive sealing compounds resin based, namely, mastics for sealing joints; sealing compounds; weatherstripping sealants in the nature of caulk; mastics for sealing joints; sealants for seams in vehicle bodywork, namely, including and not limited to acrylic, acrylate, polyurethane, polysulfide, polythioether, corrosion-resistant, fuel resistant, water-resistant, chemical resistant mastic compositions for sealing and jointing for aircraft and automotive assemblies in the nature of padding materials of rubber or plastics; anti-corrosion tape.; sealants for seams in vehicle bodywork; mastic compositions for sealing and jointing; metal faced bituminous mastic sealing strip; padding materials of rubber or plastics; anti-corrosion tapeClass 017 for Adhesive-coated plastic strips for use in manufacture; adhesive-coated plastic foils for use in manufacture; adhesive strips in the nature of adhesive plastic film for use in commercial or industrial manufacturing; adhesive materials in the form of adhesive bands other than stationery and not for medical or household purposes; insulating mastics, namely, insulating sealant paste for filling of voids, crevices and gaps in aircraft and automotive manufacturing; insulating materials; insulating tapes; insulating coatings; stopping or barrier sealant paste, all in the nature of sealant compounds for joints; caulking compounds; polyurethane sealants; silicone sealants; adhesive sealant and caulking compounds; sealants for sealing joints, faying surfaces, crevices, gaps and voids encountered in aircraft assembles for fuselage and structural components; aircraft and automotive sealing compounds resin based, namely, mastics for sealing joints; weatherstripping sealants in the nature of caulk; sealants for seams in vehicle bodywork, namely, including and not limited to acrylic, acrylate, polyurethane, polysulfide, polythioether, corrosion-resistant, fuel resistant, water-resistant, chemical resistant mastic compositions for sealing and jointing for aircraft and automotive assemblies in the nature of padding materials of rubber or plastics; anti-corrosion tape.
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

APPLICANT AND/OR ENTITY INFORMATION
Applicant proposes to amend the following:
Current: Socomore S.A.S. a(n) société par actions simplifiée (sas), legally organized under the laws of France, having an address of
      ZI du Prat - CS23707
      Vannes, 56037
      France

      817-335-1615
Proposed: Socomore S.A.S., société par actions simplifiée (sas) legally organized under the laws of France, having an address of
      ZI du Prat - Av. Paul Dupleix CS23707
      Vannes Cedex, F-56037
      France
      817-335-1615
      817-335-1603

The applicant's current attorney information: Sara Kamal. Sara Kamal of BROUDE SMITH JENNINGS & MCGLINCHEY PC, is located at

      309 WEST 7TH STREET, SUITE 1100
      FORT WORTH, Texas 76102
      US
The docket/reference number is 10029.018.

The phone number is 817-335-1615.

The fax number is 817-335-1603.

The email address is skamal@bsjpc.com

The applicants proposed attorney information: Sara Kamal. Sara Kamal of BROUDE SMITH JENNINGS & MCGLINCHEY PC, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, is located at

      309 WEST 7TH STREET, SUITE 1100
      FORT WORTH, Texas 76102
      United States
The docket/reference number is 10029.018.

The phone number is 817-335-1615.

The fax number is 817-335-1603.

The email address is skamal@bsjpc.com

Sara Kamal submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.
The applicant's current correspondence information: Sara Kamal. Sara Kamal of BROUDE SMITH JENNINGS & MCGLINCHEY PC, is located at

      309 WEST 7TH STREET, SUITE 1100
      FORT WORTH, Texas 76102
      US
The docket/reference number is 10029.018.

The phone number is 817-335-1615.

The fax number is 817-335-1603.

The email address is skamal@bsjpc.com; kdm@bsjpc.com

The applicants proposed correspondence information: Sara Kamal. Sara Kamal of BROUDE SMITH JENNINGS & MCGLINCHEY PC, is located at

      309 WEST 7TH STREET, SUITE 1100
      FORT WORTH, Texas 76102
      United States
The docket/reference number is 10029.018.

The phone number is 817-335-1615.

The fax number is 817-335-1603.

The email address is skamal@bsjpc.com; kdm@bsjpc.com

SIGNATURE(S)
Response Signature
Signature: /Sara Kamal/     Date: 08/22/2019
Signatory's Name: Sara Kamal
Signatory's Position: Attorney of record, Texas bar member

Signatory's Phone Number: 8173351615

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

Mailing Address:    Sara Kamal
   BROUDE SMITH JENNINGS & MCGLINCHEY PC
   
   309 WEST 7TH STREET, SUITE 1100
   FORT WORTH, Texas 76102
Mailing Address:    Sara Kamal
   BROUDE SMITH JENNINGS & MCGLINCHEY PC
   309 WEST 7TH STREET, SUITE 1100
   FORT WORTH, Texas 76102
        
Serial Number: 88296711
Internet Transmission Date: Thu Aug 22 15:16:09 EDT 2019
TEAS Stamp: USPTO/ROA-XX.XX.XX.XXX-20190822151609942
488-88296711-610d77757e18b283380b4da28cb
bf58e857c974f013181114663aab486e6d68b46d
-N/A-N/A-20190822150828593322