TEAS Plus New Application

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1478 (Rev 09/2006)

OMB No. 0651-0009 (Exp 02/28/2021)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1478 (Rev 09/2006)

OMB No. 0651-0009 (Exp 02/28/2021)

Trademark/Service Mark Application, Principal Register

TEAS Plus Application

Serial Number: 88291731

Filing Date: 02/06/2019

To the Commissioner for Trademarks:

MARK: (Stylized and/or Design, see mark)
The color(s) blue, black, and white is/are claimed as a feature of the mark. The mark consists of the word ANGLE displayed in white capital letters on a blue background above a white stripe. The word ANGLE is adjacent to a white rectangle. The white rectangle is displayed on an angle and is attached to the white stripe. The white rectangle is adjacent to a black triangle.
The applicant, Angle Tool Works Inc., AKA Angle Works Inc., Angle Pattern and Mold Corporation, and Angle Tool Co., a corporation of Illinois, having an address of
      16W171 83rd Street
      Burr Ridge, Illinois 60527
      United States
      800-322-6453(phone)
      (630) 325-0205(fax)

requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C. Section 1051 et seq.), as amended, for the following:

For specific filing basis information for each item, you must view the display within the Input Table.
       International Class 037:  Machinery maintenance and repair; Repair, maintenance and modification of tooling for the plastics industry, thermoform tooling for the plastics industry, molds for the plastics industry, thermoform tooling, large flat bed thermoform molds, thermoform small format molds, thermoform third motion form tooling, thermoform inline and post trim tooling, thermoform cut knife trim tooling, composite molds, compression molds, injection molds, bottle blow molds, automotive blow molds, industrial blow molds, case and panel blow molds, form-fill-seal tooling, trim tooling, single row trim tooling, double row trim tooling, pre-punch trim tooling, cut-knife trim tooling, trim-in-place incline tooling, tilt bed tooling, post trim tooling, machine steel cut knives, floating and fixed position knife stations, and stacker tooling

Use in Commerce: The applicant is using the mark in commerce on or in connection with the identified goods/services. The applicant attaches, or will later submit, one specimen as a JPG/PDF image file showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, regardless of whether the mark itself is in the standard character format or is a stylized or design mark. The specimen image file may be in color, and the image must be in color if color is being claimed as a feature of the mark.

In International Class 037, the mark was first used by the applicant or the applicant's related company or licensee predecessor in interest at least as early as 00/00/1970, and first used in commerce at least as early as 00/00/1970, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) Screen shots of the webpages from the Applicant's website by which the Applicant advertises its services.

Original PDF file:
SPE0-104182134246-20190206164712349582_._Specimen_-_Services.pdf
Converted PDF file(s) (18 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5
Specimen File6
Specimen File7
Specimen File8
Specimen File9
Specimen File10
Specimen File11
Specimen File12
Specimen File13
Specimen File14
Specimen File15
Specimen File16
Specimen File17
Specimen File18
Original PDF file:
SPE0-3-104182134246-20190206164712349582_._Specimen_-_Services.pdf
Converted PDF file(s) (18 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5
Specimen File6
Specimen File7
Specimen File8
Specimen File9
Specimen File10
Specimen File11
Specimen File12
Specimen File13
Specimen File14
Specimen File15
Specimen File16
Specimen File17
Specimen File18

For specific filing basis information for each item, you must view the display within the Input Table.
       International Class 040:  Contract manufacturing in the field of tooling for the plastics industry, thermoform tooling for the plastics industry, molds for the plastics industry, thermoform tooling, large flat bed thermoform molds, thermoform small format molds, thermoform third motion form tooling, thermoform inline and post trim tooling, thermoform cut knife trim tooling, composite molds, compression molds, injection molds, bottle blow molds, automotive blow molds, industrial blow molds, case and panel blow molds, form-fill-seal tooling, trim tooling, single row trim tooling, double row trim tooling, pre-punch trim tooling, cut-knife trim tooling, trim-in-place incline tooling, tilt bed tooling, post trim tooling, machine steel cut knives, floating and fixed position knife stations, and stacker tooling; Custom building of tooling for the plastics industry, thermoform tooling for the plastics industry, molds for the plastics industry, thermoform tooling, large flat bed thermoform molds, thermoform small format molds, thermoform third motion form tooling, thermoform inline and post trim tooling, thermoform cut knife trim tooling, composite molds, compression molds, injection molds, bottle blow molds, automotive blow molds, industrial blow molds, case and panel blow molds, form-fill-seal tooling, trim tooling, single row trim tooling, double row trim tooling, pre-punch trim tooling, cut-knife trim tooling, trim-in-place incline tooling, tilt bed tooling, post trim tooling, machine steel cut knives, floating and fixed position knife stations, and stacker tooling; Custom manufacture of tooling for the plastics industry, thermoform tooling for the plastics industry, molds for the plastics industry, thermoform tooling, large flat bed thermoform molds, thermoform small format molds, thermoform third motion form tooling, thermoform inline and post trim tooling, thermoform cut knife trim tooling, composite molds, compression molds, injection molds, bottle blow molds, automotive blow molds, industrial blow molds, case and panel blow molds, form-fill-seal tooling, trim tooling, single row trim tooling, double row trim tooling, pre-punch trim tooling, cut-knife trim tooling, trim-in-place incline tooling, tilt bed tooling, post trim tooling, machine steel cut knives, floating and fixed position knife stations, and stacker tooling; Custom construction of tooling for the plastics industry, thermoform tooling for the plastics industry, molds for the plastics industry, thermoform tooling, large flat bed thermoform molds, thermoform small format molds, thermoform third motion form tooling, thermoform inline and post trim tooling, thermoform cut knife trim tooling, composite molds, compression molds, injection molds, bottle blow molds, automotive blow molds, industrial blow molds, case and panel blow molds, form-fill-seal tooling, trim tooling, single row trim tooling, double row trim tooling, pre-punch trim tooling, cut-knife trim tooling, trim-in-place incline tooling, tilt bed tooling, post trim tooling, machine steel cut knives, floating and fixed position knife stations, and stacker tooling[construction of buildings and other structures is in 37]; Manufacture of tooling for the plastics industry, thermoform tooling for the plastics industry, molds for the plastics industry, thermoform tooling, large flat bed thermoform molds, thermoform small format molds, thermoform third motion form tooling, thermoform inline and post trim tooling, thermoform cut knife trim tooling, composite molds, compression molds, injection molds, bottle blow molds, automotive blow molds, industrial blow molds, case and panel blow molds, form-fill-seal tooling, trim tooling, single row trim tooling, double row trim tooling, pre-punch trim tooling, cut-knife trim tooling, trim-in-place incline tooling, tilt bed tooling, post trim tooling, machine steel cut knives, floating and fixed position knife stations, and stacker tooling to order and/or specification of others; Manufacturing services for others in the field of tooling for the plastics industry, thermoform tooling for the plastics industry, molds for the plastics industry, thermoform tooling, large flat bed thermoform molds, thermoform small format molds, thermoform third motion form tooling, thermoform inline and post trim tooling, thermoform cut knife trim tooling, composite molds, compression molds, injection molds, bottle blow molds, automotive blow molds, industrial blow molds, case and panel blow molds, form-fill-seal tooling, trim tooling, single row trim tooling, double row trim tooling, pre-punch trim tooling, cut-knife trim tooling, trim-in-place incline tooling, tilt bed tooling, post trim tooling, machine steel cut knives, floating and fixed position knife stations, and stacker tooling

Use in Commerce: The applicant is using the mark in commerce on or in connection with the identified goods/services. The applicant attaches, or will later submit, one specimen as a JPG/PDF image file showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, regardless of whether the mark itself is in the standard character format or is a stylized or design mark. The specimen image file may be in color, and the image must be in color if color is being claimed as a feature of the mark.

In International Class 040, the mark was first used by the applicant or the applicant's related company or licensee predecessor in interest at least as early as 00/00/1970, and first used in commerce at least as early as 00/00/1970, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) Screen shots of the webpages from the Applicant's website by which the Applicant advertises its services.

Original PDF file:
SPE0-1-104182134246-20190206164712349582_._Specimen_-_Services.pdf
Converted PDF file(s) (18 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5
Specimen File6
Specimen File7
Specimen File8
Specimen File9
Specimen File10
Specimen File11
Specimen File12
Specimen File13
Specimen File14
Specimen File15
Specimen File16
Specimen File17
Specimen File18
Original PDF file:
SPE0-4-104182134246-20190206164712349582_._Specimen_-_Services.pdf
Converted PDF file(s) (18 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5
Specimen File6
Specimen File7
Specimen File8
Specimen File9
Specimen File10
Specimen File11
Specimen File12
Specimen File13
Specimen File14
Specimen File15
Specimen File16
Specimen File17
Specimen File18

For specific filing basis information for each item, you must view the display within the Input Table.
       International Class 042:  Research and development of new products for others; Tool design

Use in Commerce: The applicant is using the mark in commerce on or in connection with the identified goods/services. The applicant attaches, or will later submit, one specimen as a JPG/PDF image file showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, regardless of whether the mark itself is in the standard character format or is a stylized or design mark. The specimen image file may be in color, and the image must be in color if color is being claimed as a feature of the mark.

In International Class 042, the mark was first used by the applicant or the applicant's related company or licensee predecessor in interest at least as early as 00/00/1970, and first used in commerce at least as early as 00/00/1970, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) Screen shots of the webpages from the Applicant's website by which the Applicant advertises its services.

Original PDF file:
SPE0-2-104182134246-20190206164712349582_._Specimen_-_Services.pdf
Converted PDF file(s) (18 pages)
Specimen File1
Specimen File2
Specimen File3
Specimen File4
Specimen File5
Specimen File6
Specimen File7
Specimen File8
Specimen File9
Specimen File10
Specimen File11
Specimen File12
Specimen File13
Specimen File14
Specimen File15
Specimen File16
Specimen File17
Specimen File18



For informational purposes only, applicant's website address is: www.angletoolworks.com/
The applicant's current Attorney Information:
      James L. Poznak of Poznak Law Firm Ltd.
      Suite 206
      2001 Midwest Road
      Oak Brook, Illinois 60523
      United States
      630-792-9000(phone)
      630-792-2107(fax)
      jlp@poznaklaw.com (authorized)

The applicant's current Correspondence Information:

James L. Poznak

Poznak Law Firm Ltd.

Suite 206       2001 Midwest Road

Oak Brook, Illinois 60523

630-792-9000(phone)

630-792-2107(fax)

jlp@poznaklaw.com (authorized) E-mail Authorization: I authorize the USPTO to send e-mail correspondence concerning the application to the applicant or the applicant's attorney, or the applicant's domestic representative at the e-mail address provided in this application. I understand that a valid e-mail address must be maintained and that the applicant or the applicant's attorney must file the relevant subsequent application-related submissions via the Trademark Electronic Application System (TEAS). Failure to do so will result in the loss of TEAS Plus status and a requirement to submit an additional processing fee of $125 per international class of goods/services.

A fee payment in the amount of $675 has been submitted with the application, representing payment for 3 class(es).

Declaration

	Basis: If the applicant is filing the application based on use in commerce under 15 U.S.C. § 1051(a): The signatory believes that the applicant is the owner of the trademark/service mark sought to be registered; The mark is in use in commerce on or in connection with the goods/services in the application; The specimen(s) shows the mark as used on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate. AND/OR If the applicant is filing the application based on an intent to use the mark in commerce under 15 U.S.C. § 1051(b), § 1126(d), and/or § 1126(e): The signatory believes that the applicant is entitled to use the mark in commerce; The applicant has a bona fide intention to use the mark in commerce on or in connection with the goods/services in the application; and To the best of the signatory's knowledge and belief, the facts recited in the application are accurate.
	To the best of the signatory's knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive.
	To the best of the signatory's knowledge, information, and belief, formed after an inquiry reasonable under the circumstances, the allegations and other factual contentions made above have evidentiary support.
	The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.

Declaration Signature

Signature: /James L. Poznak/   Date: 02/06/2019
Signatory's Name: James L. Poznak
Signatory's Position: Attorney of record, Illinois bar member
Signatory's Phone Number: 630-792-9000
Payment Sale Number: 88291731
Payment Accounting Date: 02/07/2019

Serial Number: 88291731
Internet Transmission Date: Wed Feb 06 18:15:41 EST 2019
TEAS Stamp: USPTO/FTK-XXX.XXX.XXX.XXX-20190206181541
648841-88291731-6203d32dfd831316dfcafb55
cd58bf3189a84a5fc2d6ce35948fca0162cabb55
e99-CC-5021-20190206164712349582