Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88281492 UNITIZED(Standard Characters, see http://uspto.report/TM/88281492/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 007 for Machines and machine tools; motors and engines (except for land vehicles); machine coupling and transmission components (except for land vehicles); oil drilling rigs and parts and fittings thereof; oil drilling tools; drilling rigs for drilling off-shore wells and parts and fittings thereof; metallic tools (machine) for use in completion of subterranean wells; metallic tools (machine) for use in drilling of subterranean wells; machines for drilling wells; apparatus for drilling wells; apparatus for use in well drilling operations; wellhead apparatus (apparatus for use in well drilling operations); valves for use in wellhead apparatus
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Machines and machine tools; Machines for providing pressure control and structural support for the blow out preventer (BOP) and for creating an interface for drilling and casing suspension, and providing annular access for pressure monitoring and machine tools for providing pressure control interface to the wellhead and valve components to be run in the rig; motors and engines (except for land vehicles); ; machine coupling and transmission components (except for land vehicles); Machines , namely, multi bowl wellhead, speed head, lock ring, safe drill and machine tools, namely, running tools; ; oil drilling tools; motors and engines except for land vehicles; machine coupling and transmission components except for land vehicles; metallic tools (machine) for use in completion of subterranean wells; ; metallic tools (machine) for use in drilling of subterranean wells; oil drilling rigs and parts and fittings thereof; oil drilling tools, namely, test plugs, back pressure valves, wear bushings, casing head, running tool, casing hanger running tool, packoff running tool, rotating torque tool, tension hanger; apparatus for drilling wells; ; apparatus for use in well drilling operations; drilling rigs for drilling off-shore wells and parts and fittings thereof; wellhead apparatus (apparatus for use in well drilling operations); ; valves for use in wellhead apparatus; metalworking machine tools for use in completion of subterranean wells; metal machine tools for use in drilling of subterranean wells; ; machines for drilling wells; ; apparatus for drilling wells, namely, surface wellhead systems, casing head, casing spool, tubing head, casing hangers, tubing hangers, seal packoffs, valves; ; apparatus for use in well drilling operations, namely, surface wellhead systems, casing head, casing spool, tubing head, casing hangers, tubing hangers, seal packoffs, offline cementing, dummy hangers, lubricator; ; wellhead apparatus, namely, apparatus for use in well drilling operations in the nature of well drilling rig mechanical handling machines and devices; valves being parts of wellhead machineClass 007 for Machines for providing pressure control and structural support for the blow out preventer (BOP) and for creating an interface for drilling and casing suspension, and providing annular access for pressure monitoring and machine tools for providing pressure control interface to the wellhead and valve components to be run in the rig; ; Machines , namely, multi bowl wellhead, speed head, lock ring, safe drill and machine tools, namely, running tools; ; motors and engines except for land vehicles; machine coupling and transmission components except for land vehicles; ; oil drilling rigs and parts and fittings thereof; oil drilling tools, namely, test plugs, back pressure valves, wear bushings, casing head, running tool, casing hanger running tool, packoff running tool, rotating torque tool, tension hanger; ; drilling rigs for drilling off-shore wells and parts and fittings thereof; ; metalworking machine tools for use in completion of subterranean wells; metal machine tools for use in drilling of subterranean wells; ; machines for drilling wells; ; apparatus for drilling wells, namely, surface wellhead systems, casing head, casing spool, tubing head, casing hangers, tubing hangers, seal packoffs, valves; ; apparatus for use in well drilling operations, namely, surface wellhead systems, casing head, casing spool, tubing head, casing hangers, tubing hangers, seal packoffs, offline cementing, dummy hangers, lubricator; ; wellhead apparatus, namely, apparatus for use in well drilling operations in the nature of well drilling rig mechanical handling machines and devices; valves being parts of wellhead machine
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

The applicant's current attorney information: Wei Wei Jeang. Wei Wei Jeang of GRABLE MARTIN FULTON PLLC, is located at

      2709 DUBLIN STREET
      PLANO, Texas 75094
      US
The docket/reference number is WEIR-M0002US.

The phone number is 469-878-8643.

The email address is docketing@gchub.com

The applicants proposed attorney information: Wei Wei Jeang. Wei Wei Jeang of GRABLE MARTIN FULTON PLLC, is a member of the XX bar, admitted to the bar in XXXX, bar membership no. XXX, is located at

      2709 DUBLIN STREET
      PLANO, Texas 75094
      United States
The docket/reference number is WEIR-M0002US.

The phone number is 469-878-8643.

The email address is docketing@gchub.com

Wei Wei Jeang submitted the following statement: The attorney of record is an active member in good standing of the bar of the highest court of a U.S. state, the District of Columbia, or any U.S. Commonwealth or territory.
The applicant's current correspondence information: WEI WEI JEANG. WEI WEI JEANG of GRABLE MARTIN FULTON PLLC, is located at

      2709 DUBLIN STREET
      PLANO, Texas 75094
      US
The docket/reference number is WEIR-M0002US.

The phone number is 469-878-8643.

The email address is docketing@gchub.com

The applicants proposed correspondence information: Wei Wei Jeang. Wei Wei Jeang of GRABLE MARTIN FULTON PLLC, is located at

      2709 DUBLIN STREET
      PLANO, Texas 75094
      United States
The docket/reference number is WEIR-M0002US.

The phone number is 469-878-8643.

The email address is docketing@gchub.com

SIGNATURE(S)
Declaration Signature

DECLARATION: The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that, if the applicant submitted the application or allegation of use (AOU) unsigned, all statements in the application or AOU and this submission based on the signatory's own knowledge are true, and all statements in the application or AOU and this submission made on information and belief are believed to be true.

STATEMENTS FOR UNSIGNED SECTION 1(a) APPLICATION/AOU: If the applicant filed an unsigned application under 15 U.S.C. §1051(a) or AOU under 15 U.S.C. §1051(c), the signatory additionally believes that: the applicant is the owner of the mark sought to be registered; the mark is in use in commerce and was in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; the original specimen(s), if applicable, shows the mark in use in commerce as of the filing date of the application or AOU on or in connection with the goods/services/collective membership organization in the application or AOU; for a collective trademark, collective service mark, collective membership mark application, or certification mark application, the applicant is exercising legitimate control over the use of the mark in commerce and was exercising legitimate control over the use of the mark in commerce as of the filing date of the application or AOU; for a certification mark application, the applicant is not engaged in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

STATEMENTS FOR UNSIGNED SECTION 1(b)/SECTION 44 APPLICATION AND FOR SECTION 66(a) COLLECTIVE/CERTIFICATION MARK APPLICATION: If the applicant filed an unsigned application under 15 U.S.C. §§ 1051(b), 1126(d), and/or 1126(e), or filed a collective/certification mark application under 15 U.S.C. §1141f(a), the signatory additionally believes that: for a trademark or service mark application, the applicant is entitled to use the mark in commerce on or in connection with the goods/services specified in the application; the applicant has a bona fide intention to use the mark in commerce and had a bona fide intention to use the mark in commerce as of the application filing date; for a collective trademark, collective service mark, collective membership mark, or certification mark application, the applicant has a bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce and had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce as of the application filing date; the signatory is properly authorized to execute the declaration on behalf of the applicant; for a certification mark application, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant. To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

Signature: /Nimish Gupta/      Date: 10/30/2019
Signatory's Name: Nimish Gupta
Signatory's Position: Authorised Representative
Signatory's Phone Number: 61 2 8081 7465


Response Signature
Signature: /Wei Wei Jeang/     Date: 10/29/2019
Signatory's Name: Wei Wei Jeang
Signatory's Position: Attorney of Record, Texas Bar Member

The signatory has confirmed that he/she is a U.S.-licensed attorney who is an active member in good standing of the bar of the highest court of a U.S. state (including the District of Columbia and any U.S. Commonwealth or territory); and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.-licensed attorney not currently associated with his/her company/firm previously represented the owner/holder in this matter: the owner/holder has revoked their power of attorney by a signed revocation or substitute power of attorney with the USPTO; the USPTO has granted that attorney's withdrawal request; the owner/holder has filed a power of attorney appointing him/her in this matter; or the owner's/holder's appointed U.S.-licensed attorney has filed a power of attorney appointing him/her as an associate attorney in this matter.

Mailing Address:    WEI WEI JEANG
   GRABLE MARTIN FULTON PLLC
   
   2709 DUBLIN STREET
   PLANO, Texas 75094
Mailing Address:    Wei Wei Jeang
   GRABLE MARTIN FULTON PLLC
   2709 DUBLIN STREET
   PLANO, Texas 75094
        
Serial Number: 88281492
Internet Transmission Date: Tue Oct 29 19:17:18 EDT 2019
TEAS Stamp: USPTO/ROA-XX.XXX.XXX.XX-2019102919171862
4809-88281492-700799a78c16551f83098e6475
7a553a166b312549b4cc0d77d3fe1c81de7688e1
a-N/A-N/A-20191029123829992404