Statement of Use

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1553 (Rev 09/2005)

OMB No. 0651-0054 (Exp 12/31/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1553 (Rev 09/2005)

OMB No. 0651-0054 (Exp 12/31/2020)

Trademark/Service Mark Statement of Use
(15 U.S.C. Section 1051(d))

To the Commissioner for Trademarks:
MARK: MADE IN USA (Stylized and/or with Design, see mark)
SERIAL NUMBER: 88258986


OWNER AND/OR ENTITY INFORMATION
The owner proposes to amend the following:
Current: Wright Tool Company, having an address of
      One Wright Drive
      P.O. Box 512
      Barberton, Ohio 44203
      United States
Proposed: Wright Tool Company, having an address of
      One Wright Drive
      P.O. Box 512
      Barberton, Ohio 44203
      United States
      Phone:
      Email: XXXX

The owner is submitting the following allegation of use information:

For International Class 008:
Current identification: Hand tools, namely, wrenches, nut wrenches, pipe wrenches, screw wrenches, spark wrenches, torque wrenches, combination wrenches, combination and open-end wrenches, open-end wrenches, box end wrenches, flare nut wrenches, ratcheting flare nut wrenches, crowfoot wrenches, spanner wrenches, adjustable wrenches, flange jack wrenches, structural wrenches for construction, ratcheting box wrenches, manually operated openers for drum caps, socket wrenches, sockets, socket sets, metric socket sets, drive metric socket sets, impact and power socket sets, wrench sets, ratchet wrenches, ratchet handles, attachments for ratchet wrenches, namely, universal joints, socket nut drivers, ratchet wrench extensions, flat wrenches, stud removers, namely, a hand tool for loosening hard-to-turn studs and for removing broken studs, screwdrivers and screwdriver sets, nut drivers and nut driver sets, screwdriver sockets, screwdriver bits, bits for hand drills, screwdrivers, sockets, bit holders, namely, tools for holding bits for hand drills and bits for hand operated bit drivers, bits, namely, adaptors for interchange of sockets and attachments from one drive size to another for hand tools, flex handles, namely, tools for socket wrenches for allowing the drive head of hand tools to pivot back and forth on the handle to allow the handle to avoid obstructions when being turned in a cramped space, bull bars, namely, a heavy duty socket handle for removing bolts, sliding T drive, namely, a tool with a sliding drive head for allowing the drive head to slide back and forth on a tool to avoid obstructions when being turned in a cramped space, ball joint impact socket wrenches, torque screwdrivers, torque multipliers, replacement squares for use with torque multipliers, hex keys, hex key wrenches, hex key wrench sets, pliers, snips, scissors, pliers sets, pipe pliers, tongue and groove pliers, cutting pliers, slip joint pliers, long nose pliers, hose clamp pliers, crimping irons, aviation snips, offset snips, metal cutting snips, wire cutters, c-clamp pliers, wrench plier vise grips, hammers, punches, chisels, cold chisels, cape chisels, round ne chisels, center punches, pilot punches, solid punches, starter punches, prick punches, pin punches, mallets, ripping hammers, sledgehammers, pry bars, crowbars, wrecking bars, rivet removers, nail pullers, carpenters' pincers, clamps, carpenter's clamps, metal vises, hand operated lifting flange jacks, scrapers, gasket scrapers, putty knives, razor scrapers, utility knives, screw extractors, saws, hand saws, namely, hack saws, replacement blades for hand saws and hack saws; magnetic hand tools for picking up magnetic objects, namely, fasteners; hand hooks, picks, ball drivers; socket wrenches and handles; tool pouches for attachment to tool belts; roll-up fabric container for hand tools; ratchets, sockets, and parts therefor as hand tools; socket sets and wrench sets; sets of hand tools, namely, wrenches, sockets, screw drivers, punches, chisels and files; Hand Tools, namely, sockets, socket drivers, wrenches, socket wrenches, ratchets, ratchet extensions and socket set boxes

The mark is in use in commerce on or in connection with all of the goods/services, or to indicate membership in the collective organization listed in the application or Notice of Allowance or as subsequently modified for this specific class.

The mark was first used by the applicant, or the applicant's related company, licensee, or predecessor in interest at least as early as 02/00/2019, and first used in commerce at least as early as 08/00/2019, and is now in use in such commerce. The applicant is submitting one specimen for the class showing the mark as used in commerce on or in connection with any item in the class, consisting of a(n) photo of point of sale display board and a case for the goods.
Specimen File1


The applicant is not filing a Request to Divide with this Allegation of Use form. Correspondence Information (current):
      Sean F. Mellino
      PRIMARY EMAIL FOR CORRESPONDENCE: trademarks@walterhav.com
      SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED
Correspondence Information (proposed):
      Sean F. Mellino
      PRIMARY EMAIL FOR CORRESPONDENCE: trademarks@walterhav.com
      SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): smellino@walterhav.com

The docket/reference number is 70153-041US.

Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the applicant owner/holder and the applicant owner's/holder's attorney, if appointed, and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).

A fee payment in the amount of $100 will be submitted with the form, representing payment for the allegation of use for 1 class.


Declaration

	The signatory believes that the applicant is the owner of the mark sought to be registered. For a trademark or service mark application, the mark is in use in commerce on or in connection with all the goods/services in the application or notice of allowance, or as subsequently modified. For a collective trademark, collective service mark, collective membership mark application, the applicant is exercising legitimate control over the use of the mark in commerce by members on or in connection with all the goods/services/collective membership organization in the application or notice of allowance, or as subsequently modified. For a certification mark application, the applicant is exercising legitimate control over the use of the mark in commerce by authorized users on or in connection with the all goods/services in the application or notice of allowance, or as subsequently modified, and the applicant is not engaged in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.
	The specimen(s) shows the mark as used on or in connection with the goods/services/collective membership organization in commerce.
	To the best of the signatory's knowledge and belief, no other persons, except, if applicable, authorized users, members, and/or concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.
	To the best of the signatory's knowledge, information, and belief, formed after an inquiry reasonable under the circumstances, the allegations and other factual contentions made above have evidentiary support.
	The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. § 1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.

Signature: /sean f. mellino/      Date Signed: 06/25/2020
Signatory's Name: sean f. mellino
Signatory's Position: attorney of record - Ohio bar member
Signatory's Phone: 2167811212

RAM Sale Number: 88258986
RAM Accounting Date: 06/26/2020

Serial Number: 88258986
Internet Transmission Date: Fri Jun 26 10:36:25 ET 2020
TEAS Stamp: USPTO/SOU-XX.XX.XXX.X-202006261036257765
34-88258986-7108c6b7a684afec54698cb22b6b
fbc3b62e98e774245f9e83112048f03e221cce-C
C-36244110-20200624163651550865