|
NOTICE OF ALLOWANCE (NOA)
ISSUE DATE: Jan 28, 2020 |
U.S. Serial Number: 88228657
Mark: W (Stylized/Design)
Docket/Reference Number: 70153-038US
|
| No opposition was filed for this published application. The issue date of this NOA establishes the due date for the filing of
a Statement of Use (SOU) or a Request for Extension of Time to file a Statement of Use (Extension Request). WARNING: An SOU that meets all legal requirements must be filed before a registration
certificate can issue. Please read below for important information regarding the applicant's pending six (6) month deadline. |
| SIX (6)-MONTH DEADLINE: Applicant has six (6) MONTHS from the NOA issue date to file either: |
| - |
An SOU, if the applicant is using the mark in commerce (required even if the applicant was using the mark at the time of filing the
application, if use basis was not specified originally); OR |
| - |
An Extension Request, if the applicant is not yet using the mark in commerce. If an Extension Request is filed, a new request must
be filed every six (6) months until the SOU is filed. The applicant may file a total of five (5) extension requests. WARNING: An SOU may not be filed more than thirty-six
(36) months from when the NOA issued. The deadline for filing is always calculated from the issue date of the NOA. |
How to file SOU and/or Extension Request:
Use the Trademark Electronic Application System (TEAS). Do NOT reply to this e-mail, as e-mailed filings will NOT be processed. Both the SOU and Extension Request have many
legal requirements, including fees and verified statements; therefore, please use the USPTO forms available online at http://www.gov.uspto.report/trademarks-application-process/filing-online (under the "INTENT-TO-USE (ITU) FORMS" category) to avoid the possible omission of required information.
If you have questions about this notice, please contact the Trademark Assistance Center at 1-800-786-9199. |
| FAILURE TO FILE A REQUIRED DOCUMENT OUTLINED ABOVE DURING THE APPROPRIATE TIME PERIOD WILL RESULT IN THE ABANDONMENT OF THIS
APPLICATION. |
REVIEW APPLICATION INFORMATION FOR ACCURACY |
| Serial Number: |
88228657
|
| Mark: |
W (Stylized/Design)
|
| Docket/Reference Number: |
70153-038US
|
| Owner: |
Wright Tool Company
One Wright Drive
P.O. Box 512
Barberton , OHIO 44203
|
| Correspondence Address: |
Sean F. Mellino
WALTER | HAVERFIELD LLP
1301 EAST 9TH STREET, SUITE 3500
THE TOWER AT ERIEVIEW
CLEVELAND, OH, 44114-1821
|
This application has the following bases, but not necessarily for all listed goods/services: |
|
Section 1(a): NO |
Section 1(b): YES |
Section 44(e): NO |
| GOODS/SERVICES BY INTERNATIONAL CLASS |
| 008 - |
Hand tools, namely, wrenches, nut wrenches, pipe wrenches, screw wrenches, spark wrenches, torque wrenches, combination wrenches, combination and open-end
wrenches, open-end wrenches, box end wrenches, flare nut wrenches, ratcheting flare nut wrenches, crowfoot wrenches, spanner wrenches, adjustable wrenches, flange jack wrenches, structural wrenches
for construction, ratcheting box wrenches, manually operated openers for drum caps, socket wrenches, sockets, socket sets, metric socket sets, drive metric socket sets , impact and power socket sets,
wrench sets, ratchet wrenches, ratchet handles, attachments for ratchet wrenches, namely, universal joints, socket nut drivers, ratchet wrench extensions, flat wrenches, stud removers, namely, a hand
tool for loosening hard-to-turn studs and for removing broken studs, screwdrivers and screwdriver sets, nut drivers and nut driver sets, screwdriver sockets, screwdriver bits, bits for hand drills,
screwdrivers, sockets, bit holders, namely, tools for holding bits for hand drills and bits for hand operated bit drivers, bits, namely, adaptors for interchange of sockets and attachments from one
drive size to another for hand tools, flex handles, namely, tools for socket wrenches for allowing the drive head of hand tools to pivot back and forth on the handle to allow the handle to avoid
obstructions when being turned in a cramped space, bull bars, namely, a heavy duty socket handle for removing bolts, sliding T drive, namely , a tool with a sliding drive head for allowing the drive
head to slide back and forth on a tool to avoid obstructions when being turned in a cramped space, ball joint impact socket wrenches, torque screwdrivers, torque multipliers, replacement squares for
use with torque multipliers, hex keys, hex key wrenches, hex key wrench sets, pliers, snips, scissors, pliers sets, pipe pliers, tongue and groove pliers, cutting pliers, slip joint pliers, long nose
pliers, hose clamp pliers, crimping irons, aviation snips, offset snips , metal cutting snips, wire cutters, c-clamp pliers, wrench plier vise grips, hammers, punches, chisels, cold chisels, cape
chisels, round ne chisels, center punches, pilot punches, solid punches, starter punches, prick punches, pin punches, mallets, ripping hammers, sledgehammers, pry bars, crowbars, wrecking bars, rivet
removers, nail pullers, carpenters' pincers, clamps, carpenter's clamps, metal vises, hand operated lifting flange jacks, scrapers, gasket scrapers, putty knives, razor scrapers, utility knives,
screw extractors, saws, hand saws, namely, hack saws, replacement blades for hand saws and hack saws; magnetic hand tools for picking up magnetic objects, namely, fasteners; hand hooks, picks, ball
drivers; socket wrenches and handles; tool pouches for attachment to tool belts; roll-up fabric container for hand tools; ratchets, sockets, and parts therefor as hand tools; socket sets and wrench
sets; sets of hand tools, namely, wrenches, sockets, screw drivers, punches, chisels and files; Hand Tools, namely, sockets, socket drivers, wrenches, socket wrenches, ratchets, ratchet extensions
and socket set boxes -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
ALL OF THE GOODS/SERVICES IN EACH CLASS ARE LISTED.
|
| Appropriate Specimens for Goods and/or Services: A trademark specimen should be a label, tag, or container for the goods, or a
display associated with the goods. See TMEP §§904.03 et seq. A service mark specimen should be an advertisement, sign, brochure, website printout or other image that shows the mark used in the actual
sale or advertising of the services. See TMEP §§1301.04 et seq. For an instructional video on what is an appropriate trademark or service mark specimen for a good and/or service, click here. |
| Fraudulent statements may result in registration being cancelled: Applicants must ensure that statements made in filings to the
USPTO are accurate, as inaccuracies may result in the cancellation of any issued trademark registration. The lack of a bona fide intention to use the mark with ALL goods and/or services listed
in an application or the lack of actual use on all goods and/or services for which use is claimed could jeopardize the validity of the registration, possibly resulting in its
cancellation. |
| Additional information: For information on filing and maintenance requirements for U.S. trademark applications and registrations
and required fees, please consult the USPTO website at http://www.uspto.gov or call the Trademark Assistance Center at 1-800-786-9199. |
|