Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 09/20/2020)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 88200954 POWERCURVE(Standard Characters, see http://uspto.report/TM/88200954/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 011 for cooling tower components, namely, evaporative surface media in the nature of corrugated plastic sheets, film and splash fill in the nature of corrugated plastic sheets, drift eliminators in the nature of corrugated plastic sheets, mist eliminators in the nature of corrugated plastic sheets, inlet louvers in the nature of corrugated plastic sheets; support grids in the nature of corrugated plastic sheets; cross-corrugated film fills; anti-fouling vertical flow fills; splash fills, splash fill accessories; cellular drift eliminators; blade type drift eliminators; drift eliminator accessories, namely, support structure and hardware for drift eliminators; inlet louvers
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Proposed:
Tracked Text Description: Cooling tower components, namely, evaporative surface media in the nature of corrugated plastic sheets, film and splash fill in the nature of corrugated plastic sheets, drift eliminators in the nature of corrugated plastic sheets, mist eliminators in the nature of corrugated plastic sheets, inlet louvers in the nature of corrugated plastic sheets; support grids in the nature of corrugated plastic sheets; cooling tower components, namely, support grids in the nature of corrugated plastic sheets; cross-corrugated film fills; cooling tower components, namely, cross-corrugated film fills; anti-fouling vertical flow fills; splash fills, splash fill accessories; cooling tower components, namely, splash fills; cellular drift eliminators; cooling tower components in the nature of splash fill accessories, namely, anti-splash tap nozzles, inlet louvers and inlet louver nozzles; blade type drift eliminators; cooling tower components, namely, cellular drift eliminators; drift eliminator accessories, namely, support structure and hardware for drift eliminators; cooling tower components, namely, blade type drift eliminators; inlet louvers; cooling tower components in the nature of drift eliminator accessories, namely, support structure and hardware for drift eliminators; inlet louvers.Class 011 for Cooling tower components, namely, evaporative surface media in the nature of corrugated plastic sheets, film and splash fill in the nature of corrugated plastic sheets, drift eliminators in the nature of corrugated plastic sheets, mist eliminators in the nature of corrugated plastic sheets, inlet louvers in the nature of corrugated plastic sheets; cooling tower components, namely, support grids in the nature of corrugated plastic sheets; cooling tower components, namely, cross-corrugated film fills; anti-fouling vertical flow fills; cooling tower components, namely, splash fills; cooling tower components in the nature of splash fill accessories, namely, anti-splash tap nozzles, inlet louvers and inlet louver nozzles; cooling tower components, namely, cellular drift eliminators; cooling tower components, namely, blade type drift eliminators; cooling tower components in the nature of drift eliminator accessories, namely, support structure and hardware for drift eliminators; inlet louvers.
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

SIGNATURE(S)
Response Signature
Signature: /Laura A. Genovese/     Date: 03/05/2019
Signatory's Name: Laura A. Genovese
Signatory's Position: Attorney of record and PA bar member

Signatory's Phone Number: 267-468-7961

The signatory has confirmed that he/she is an attorney who is a member in good standing of the bar of the highest court of a U.S. state, which includes the District of Columbia, Puerto Rico, and other federal territories and possessions; and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S. attorney or a Canadian attorney/agent not currently associated with his/her company/firm previously represented the owner/holder in this matter: (1) the owner/holder has filed or is concurrently filing a signed revocation of or substitute power of attorney with the USPTO; (2) the USPTO has granted the request of the prior representative to withdraw; (3) the owner/holder has filed a power of attorney appointing him/her in this matter; or (4) the owner's/holder's appointed U.S. attorney or Canadian attorney/agent has filed a power of attorney appointing him/her as an associate attorney in this matter.

        
Serial Number: 88200954
Internet Transmission Date: Tue Mar 05 12:09:54 EST 2019
TEAS Stamp: USPTO/ROA-XX.XXX.XXX.XXX-201903051209549
80238-88200954-620683a313f114dfab12ad126
72e5e27dd4970b2619cdc5145917846e3c6e170-
N/A-N/A-20190305120833317599