UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

PRIORITY ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

 

ISSUE/MAILING DATE: 2/7/2019

 

DATABASE SEARCH:  The trademark examining attorney has searched the USPTO’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d).  TMEP §704.02; see 15 U.S.C. §1052(d).

 

ISSUES APPLICANT MUST ADDRESS:  On February 6, 2019, the trademark examining attorney and the applicant’s attorney, Tri Dang, discussed the issues below.  Applicant must timely respond to these issues.  See 15 U.S.C. §1062(b); 37 C.F.R. §2.62(a); TMEP §§708, 711.

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SUMMARY OF ISSUES:

• Issue with Specimen
• Information About Specimen Required
• Identification of Services – Amendment Required
• Multiple Class Application Requirements

 

ISSUE WITH SPECIMEN

 

Registration is refused because the specimen in International Class 9 appears to consist of a digitally altered image or a mock-up of the mark on the goods or their packaging and does not show the applied-for mark in actual use in commerce.  Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a). 

 

An image of a product or packaging that has been digitally created or otherwise altered to include the mark does not show actual use of the mark in commerce.  See 15 U.S.C. §1127; TMEP §§904.04(a), 904.07(a); cf. In re Chica, Inc., 84 USPQ2d 1845, 1848 (TTAB 2007) (holding that “a mere drawing of the goods with an illustration of how the mark may be displayed” was not an acceptable specimen because it did not show actual use in commerce); In re The Signal Cos., 228 USPQ 956, 957-58 n.4 (TTAB 1986) (noting that a printer’s proof of an advertisement would not be an acceptable specimen because it does not show actual use in commerce).  In addition, a photo of the mark on a label, tag, or piece of paper that appears on applicant’s or a third party’s goods or packaging is generally not acceptable to show applicant’s use of the applied-for mark in commerce.  See 15 U.S.C. §1127; TMEP §§904.03(a), 904.07(a).  Applicant must show the mark on applicant’s own goods or packaging as it is seen by the purchasing public, with goods that have actually been sold or transported in commerce.  See TMEP §904.07(a).

 

In this case, the label with the mark appears to have a resolution or sharpness that is different from the rest of the specimen. Furthermore, the label appears on a third party’s goods or packaging.  

 

An application based on Trademark Act Section 1(a) must include a specimen showing the applied-for mark in use in commerce for each international class of goods and/or services identified in the application or amendment to allege use.  15 U.S.C. §1051(a)(1); 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a).  “Use in commerce” means (1) a bona fide use of the applied-for mark in the ordinary course of trade (and not merely to reserve a right in the mark), (2) the mark is placed in any manner on the goods, packaging, tags or labels, or displays of the goods, and (3) the goods are actually sold or transported in commerce.  See 15 U.S.C. §1127.

 

In addition to the examples of specimens in (2) in the above paragraph, examples of specimens for goods also include instruction manuals, containers, and webpages that include a picture or textual description of the goods associated with the mark and the means to order the goods.  See TMEP §§904.03 et seq. 

 

Applicant may respond to this refusal by satisfying one of the following for each applicable international class:

 

(1)       Submit a different specimen (a verified “substitute” specimen) that (a) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use and (b) shows the mark in actual use in commerce for the goods and/or services identified in the application or amendment to allege use.  A “verified substitute specimen” is a specimen that is accompanied by the following statement made in a signed affidavit or supported by a declaration under 37 C.F.R. §2.20:  “The substitute (or new, or originally submitted, if appropriate) specimen(s) was/were in use in commerce at least as early as the filing date of the application or prior to the filing of the amendment to allege use.”  The substitute specimen cannot be accepted without this statement.

 

(2)       Amend the filing basis to intent to use under Section 1(b), for which no specimen is required.  This option will later necessitate additional fee(s) and filing requirements such as providing a specimen.

 

For an overview of both response options referenced above and instructions on how to satisfy either option online using the Trademark Electronic Application System (TEAS) form, see the Specimen webpage.

 

INFORMATION ABOUT SPECIMEN REQUIRED

 

A specimen must show the mark as used in commerce, which means use in the ordinary course of trade (not merely to reserve a right in the mark).  15 U.S.C. §§1051, 1052, 1127.  A specimen shows a mark used in commerce for goods only if it shows the mark placed on the goods, packaging, tags or labels affixed to the goods, or displays of the goods, and the goods are actually sold or transported for sale in commerce.  15 U.S.C. §1127.  Because the specimen of record appears to be digitally created or altered, or is otherwise a mock-up, it does not appear to show the mark as actually used in commerce.  Therefore, to permit proper examination of the application, applicant must submit additional information for the record about the specimen and how the mark as shown in the specimen is in use in commerce with applicant’s goods.  See 37 C.F.R. §2.61(b); TMEP §814.

 

Accordingly, applicant must respond to the following questions and requests for documentation to satisfy this request for information:

 

(1)       How are applicant’s goods sold?  Specify the retail, wholesale, or other sales environment in which the goods are sold.

 

(2)       Please provide copies of invoices, bills of sale, or other documentation of sales of the goods.

 

(3)       Was the specimen created for submission with this application?

 

(4)       Does the specimen show applicant’s product as it is currently being sold to consumers?

 

(5)       How do applicant’s goods appear in the actual sales environment?  If sold in stores, provide photos showing the goods for sale in the stores.  If sold online, identify the websites and provide copies of the webpages showing the goods for sale.  And if sold in another type of sales environment, provide photos and/or documentation showing the goods for sale in that environment.

 

(6)       If the information in question (5) about how the goods appear in the actual sales environment is not available to applicant, then please describe how applicant’s goods are transported for sale and provide photos and other documentation showing how applicant’s mark appears on the goods and/or its packaging when the goods are being transported for sale.

 

See 37 C.F.R. §2.61(b); TMEP §814.  

 

Failure to comply with a request for information is grounds for refusing registration.  In re Harley, 119 USPQ2d 1755, 1757-58 (TTAB 2016); TMEP §814.  Merely stating that information is available on applicant’s website is an insufficient response and will not make the relevant information of record.  See In re Planalytics, Inc., 70 USPQ2d 1453, 1457-58 (TTAB 2004).

 

IDENTIFICATION OF GOODS – AMENDMENT REQUIRED

 

Applicant must clarify the following wording in the identification of goods in International Class 9 because it is indefinite and overly broad.  See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03.  This wording is indefinite because it does not make clear what the goods are.

 

• The wording “augmented reality and virtual reality wearable devices” could refer to “virtual reality glasses” or “virtual reality headsets” for example. The nature of the “devices” must be further specified. Further this wording could include “exercise equipment, namely, virtual reality training cycles” in International Class 28. This wording appears in several clauses of the identification and must be corrected in each clause.

 

• The wording “head up display devices” must be further specified. Applicant must further specify the nature and purpose of the head up display devices. This wording appears in several clauses of the identification and must be corrected in each clause.

 

• The wording “solid state micro-array light emitters, namely, for augmented reality and virtual reality wearable devices, head-up display (HUD) devices and projectors and displays” must be amended to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  If the goods have no common commercial or generic name, applicant must describe the product, its main purpose, and its intended uses.  See id. The nature and/or purpose of the wording “augmented reality and virtual reality wearable devices, head-up display (HUD) devices and projectors and displays” must be further specified. This wording could include “laser light projectors” in International Class 11 or “jewelry organizer displays” in Class 20.

 

• The wording “light field modulators” must be amended to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  If the goods have no common commercial or generic name, applicant must describe the product, its main purpose, and its intended uses.  See id.

 

• The wording “solar panels” must be amended to specify the purpose or use of the solar panels. For example, this wording could include “solar panels for heat collection” in International Class 11.

 

• The wording “modules for control of solar cells and solar panels and modules for conditioning of solar cell and solar panel outputs” must be amended to specify the common commercial or generic name of the goods.  See TMEP §1402.01.  If the goods have no common commercial or generic name, applicant must describe the product, its main purpose, and its intended uses.  See id.

 

The identification for “software for computer networking” in International Class 9 is indefinite and must be clarified by amending to specify the purpose or function of the software.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.03(d).  If the software is content- or field-specific, applicant must also specify its content or field of use.  See TMEP §1402.03(d).  The USPTO requires such specificity in identifying computer software in order for a trademark examining attorney to examine the application properly and make appropriate decisions concerning possible conflicts between the applicant’s mark and other marks.  See In re N.A.D. Inc., 57 USPQ2d 1872, 1874 (TTAB 2000); TMEP §1402.03(d). In this case “Computer Networking” appears to describe a field vice a software function.

 

The following are examples of acceptable identifications for software in International Class 9:  “downloadable mobile applications for managing bank accounts,” “desktop publishing software,” “tax preparation software.”

 

Applicant may substitute the following wording, if accurate: 

 

            Class 9: Flat and curved panel display screens; solid-state 2D light-based emissive imagers and 3D light based emissive imagers; augmented reality and virtual reality wearable devices in the nature of headsets; head up display devices in the nature of transparent electronic displays for use in {specify, e.g., general aviation aircraft, projection of data from a mobile device onto a vehicle windshield, providing motorcycled riders with navigational and operational information}; solid-state 2D sensor arrays for cameras, and 3D light field photo-sensor arrays for light field cameras; 2D and 3D movie, multimedia, photographic, slide and video projectors; 2D and 3D cameras; networked 2D and 3D cameras; networked 2D and 3D movie, multimedia, photographic, slide and video projectors; networked 2D and 3D LCD large screen displays; software for administration of computer networks; software for 2D and 3D image processing, compression, transmission and reconstruction; solid state micro-array light emitters in the nature of emissive imagers, namely, for augmented reality and virtual reality wearable devices in the nature of headsets, head-up display (HUD) devices in the nature of transparent electronic displays for use in {specify, e.g., general aviation aircraft, projection of data from a mobile device onto a vehicle windshield, providing motorcycled riders with navigational and operational information}and movie projectors and flat and curved panel display screens; micro-array lenses, namely, optical lenses for 2D and 3D cameras, and augmented reality and virtual reality wearable devices in the nature of headsets; light field modulators in the nature of {describe the product, its main purpose, and its intended uses} and light field cameras; light emitting diodes and laser diodes; solar cells and solar panels for the production of electricity; Photovoltaic solar modules for control of solar cells and solar panels for the production of electricity and photovoltaic solar modules for conditioning of solar cell and solar panel outputs for the production of electricity

 

Applicant may amend the identification to clarify or limit the goods and/or services, but not to broaden or expand the goods and/or services beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods and/or services may not later be reinserted.  See TMEP §1402.07(e).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

MULTIPLE-CLASS APPLICATION REQUIREMENTS

 

The application references goods and/or services based on use in commerce in more than one international class; therefore, applicant must satisfy all the requirements below for each international class:

 

(1)       List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class (for example, International Class 3: perfume; International Class 18: cosmetic bags sold empty).

 

(2)       Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule).  Specifically, the application identifies goods and/or services based on use in commerce that are classified in at least 4 classes; however, applicant submitted a fee(s) sufficient for only 1 class.  Applicant must either (a) submit the filing fees for the classes not covered by the submitted fees or (b) restrict the application to the number of classes covered by the fees already paid.

 

(3)       Submit verified dates of first use of the mark anywhere and in commerce for each international class.  See more information about verified dates of use.

 

(4)       Submit a specimen for each international class.  The current specimen is not acceptable for any international class.  See more information about specimens.

 

            Examples of specimens for goods include tags, labels, instruction manuals, containers, and photographs that show the mark on the actual goods or packaging, or displays associated with the actual goods at their point of sale.  Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods. 

 

(5)       Submit a verified statement that “The specimen was in use in commerce on or in connection with the goods and/or services listed in the application at least as early as the filing date of the application.”  See more information about verification.

 

See 15 U.S.C. §§1051(a), 1112; 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(1), 2.86(a); TMEP §§904, 1403.01, 1403.02(c).

 

See an overview of the requirements for a Section 1(a) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.

 

RESPONSE GUIDELINES

 

If you have any questions about this Office action please call or email the assigned trademark examining attorney.  Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the refusal(s) and/or requirement(s) in this Office action.  See TMEP §§705.02, 709.06.  Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. 

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

 

/Sarah E. Steinpfad/

Sarah E. Steinpfad

Trademark Examining Attorney

Law Office 120

571-270-3089

Sarah.Steinpfad@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 2/7/2019 FOR U.S. APPLICATION SERIAL NO. 88169876

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 2/7/2019 (or sooner if specified in the Office action).  A response transmitted through the Trademark Electronic Application System (TEAS) must be received before midnight Eastern Time of the last day of the response period.  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the TEAS response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.