To: | Peachtree Woodworking Supply, Inc. (ejasbury@bellsouth.net) |
Subject: | U.S. TRADEMARK APPLICATION NO. 88135308 - SILI - P003 T007 |
Sent: | 1/10/2019 1:31:49 PM |
Sent As: | ECOM114@USPTO.GOV |
Attachments: |
UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
U.S. APPLICATION SERIAL NO. 88135308
MARK: SILI
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
APPLICANT: Peachtree Woodworking Supply, Inc.
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW. A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.
ISSUE/MAILING DATE: 1/10/2019
SEARCH OF OFFICE’S DATABASE OF MARKS
The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).
SUMMARY OF ISSUES:
1. Refusal – Mark Differs on Drawing & Specimen
2. Amended Identification of Goods Required
3. Multiple-Class Application Requirements
REFUSAL – MARK DIFFERS ON DRAWING & SPECIMEN
Registration is refused because the specimen does not show the mark in the drawing in use in commerce in International Class 008, which is required in the application. Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a), 1301.04(g)(i). The mark appearing on the specimen and in the drawing must match; that is, the mark in the drawing “must be a substantially exact representation of the mark” on the specimen. See 37 C.F.R. §2.51(a)-(b); TMEP §807.12(a).
In this case, the specimen displays the mark in many different forms with the word SILI followed by a hyphen and additional wording. However, the drawing displays the mark as SILI. Therefore, the mark on the specimen does not match the mark in the drawing because the additional wording in the various forms of the mark on the specimen each create a different commercial impression from the mark as shown in the drawing. Applicant has thus failed to provide the required evidence of use of the mark in commerce. See TMEP §807.12(a).
Applicant may respond to this refusal by satisfying one of the following:
(1) Submit a different specimen (a verified “substitute” specimen) for each applicable international class that (a) shows the mark in the drawing in actual use in commerce for the goods in the application, and (b) was in actual use in commerce at least as early as the filing date of the application.
Examples of specimens for goods include tags, labels, instruction manuals, containers, photographs that show the mark on the actual goods or packaging, and displays associated with the actual goods at their point of sale. See TMEP §§904.03 et seq. Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods. TMEP §904.03(i).
(2) Submit a request to amend the filing basis to intent to use under Section 1(b), for which no specimen is required. This option will later necessitate additional fee(s) and filing requirements such as providing a specimen.
The USPTO will not accept an amended drawing submitted in response to this refusal because the changes would materially alter the drawing of the mark in the original application or as previously acceptably amended. See 37 C.F.R. §2.72(a)-(b); TMEP §807.14. Specifically, amending the mark on the drawing to agree with any of the forms of the mark on the specimen would be a material alteration because the various forms of the mark on the specimen each create different commercial impressions due to the additional wording. Further, the additional wordings in the forms of the mark on the specimen are not separable from the mark as shown in the drawing, due to the hyphens.
For more information about drawings and instructions on how to satisfy these response options online using the Trademark Electronic Application System (TEAS) form, see the Drawing webpage.
AMENDED IDENTIFICATION OF GOODS REQUIRED
The identification of goods must be clarified because some of the goods are indefinite and/or broad, and therefore, do not clearly and specifically indicate the nature of goods for which registration is sought. Additionally, some of the goods are misclassified. Therefore, applicant must amend the referenced wording below in accordance with the bolded, italicized guidance provided. Please note that, in some instances, examining attorney has replaced any unacceptable wording with acceptable wording. Finally, if applicant adds one or more international classes to the application, applicant must comply with the multiple-class application requirements specified in this Office action.
Applicant may adopt the suggested identification of goods below, if accurate. See TMEP §1402.01.
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
MULTIPLE-CLASS APPLICATION REQUIREMENTS
(1) List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class (for example, International Class 3: perfume; International Class 18: cosmetic bags sold empty).
(2) Submit a filing fee for each international class not covered by the fee already paid (view the USPTO’s current fee schedule). Specifically, the application identifies goods based on use in commerce that are classified in at least two classes; however, applicant submitted a fee sufficient for only one class. Applicant must either (a) submit the filing fees for the classes not covered by the submitted fees or (b) restrict the application to the number of classes covered by the fees already paid.
(3) Submit verified dates of first use of the mark anywhere and in commerce for each international class. See more information about verified dates of use.
(4) Submit a specimen for each international class. The current specimen is not acceptable for any international class. See more information about specimens.
(5) Submit a verified statement that “The specimen was in use in commerce on or in connection with the goods and/or services listed in the application at least as early as the filing date of the application.” See more information about verification.
See 15 U.S.C. §§1051(a), 1112; 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(1), 2.86(a); TMEP §§904, 1403.01, 1403.02(c).
See an overview of the requirements for a Section 1(a) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
/Adetayo J. Adeyiga/
Trademark Examining Attorney
Law Office 114
(571) 272-7089
adetayo.adeyiga@uspto.gov
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.