UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

 

ISSUE/MAILING DATE: 12/12/2018

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

Advisory: Search

 

The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d).  TMEP §704.02; see 15 U.S.C. §1052(d).

 

Summary of Issues

 

• Refusal: Section 2(e)(1) Merely Descriptive
• Refusal: Specimen Unacceptable
• Requirement: Indefinite Identification of Goods
• Requirement: Unsigned Application

 

Refusal: Section 2(e)(1) Merely Descriptive

 

Registration is refused because the applied-for mark merely describes a feature of applicant’s goods.  Trademark Act Section 2(e)(1), 15 U.S.C. §1052(e)(1); see TMEP §§1209.01(b), 1209.03 et seq.

 

The applied-for mark is NOVELTY CUTLERY for “cutlery; namely, pocket, hunting and boot knives.”

 

The term “NOVELTY” means a small, mass-produced article, such as a toy or trinket.  “Cutlery” refers to cutting instruments and tools such as knives, and represents the common commercial (or generic) name for applicant’s identified “cutlery” goods.  See attached definitions from The American-Heritage Dictionary.  Novelty knives and associated cutlery are a known category of goods, and the term “novelty” is frequently used to describe various types of cutlery and knives.  See attached third-party web sites of Weapons Universe and Discount Cutlery.  As such, consumers of applicant’s goods would immediately understand that such goods are novelty cutlery items, or are otherwise intended as novelty goods.  For this reason, the applied-for mark merely describes a feature of applicant’s goods.

 

The determination of whether a mark is merely descriptive is made in relation to an applicant’s goods and/or services, not in the abstract.  DuoProSS Meditech Corp. v. Inviro Med. Devices, Ltd., 695 F.3d 1247, 1254, 103 USPQ2d 1753, 1757 (Fed. Cir. 2012); In re The Chamber of Commerce of the U.S., 675 F.3d 1297, 1300, 102 USPQ2d 1217, 1219 (Fed. Cir. 2012); TMEP §1209.01(b); see, e.g., In re Polo Int’l Inc., 51 USPQ2d 1061, 1062-63 (TTAB 1999) (finding DOC in DOC-CONTROL would refer to the “documents” managed by applicant’s software rather than the term “doctor” shown in a dictionary definition); In re Digital Research Inc., 4 USPQ2d 1242, 1243-44 (TTAB 1987) (finding CONCURRENT PC-DOS and CONCURRENT DOS merely descriptive of “computer programs recorded on disk” where the relevant trade used the denomination “concurrent” as a descriptor of a particular type of operating system). 

 

“Whether consumers could guess what the product [or service] is from consideration of the mark alone is not the test.”  In re Am. Greetings Corp., 226 USPQ 365, 366 (TTAB 1985).

 

Generally, if the individual components of a mark retain their descriptive meaning in relation to the goods and/or services, the combination results in a composite mark that is itself descriptive and not registrable.  In re Fat Boys Water Sports LLC, 118 USPQ2d 1511, 1516 (TTAB 2016) (citing In re Tower Tech, Inc., 64 USPQ2d 1314, 1317-18 (TTAB (2002)); TMEP §1209.03(d); see, e.g., Apollo Med. Extrusion Techs., Inc. v. Med. Extrusion Techs., Inc., 123 USPQ2d 1844, 1851 (TTAB 2017) (holding MEDICAL EXTRUSION TECHNOLOGIES merely descriptive of medical extrusion goods produced by employing medical extrusion technologies); In re Cannon Safe, Inc., 116 USPQ2d 1348, 1351 (TTAB 2015) (holding SMART SERIES merely descriptive of metal gun safes); In re King Koil Licensing Co., 79 USPQ2d 1048, 1052 (TTAB 2006) (holding THE BREATHABLE MATTRESS merely descriptive of beds, mattresses, box springs, and pillows). 

 

Only where the combination of descriptive terms creates a unitary mark with a unique, incongruous, or otherwise nondescriptive meaning in relation to the goods and/or services is the combined mark registrable.  See In re Colonial Stores, Inc., 394 F.2d 549, 551, 157 USPQ 382, 384 (C.C.P.A. 1968); In re Positec Grp. Ltd., 108 USPQ2d 1161, 1162-63 (TTAB 2013).

 

In this case, both the individual components and the composite result are descriptive of applicant’s goods and do not create a unique, incongruous, or nondescriptive meaning in relation to the goods and/or services.  Specifically, consumers of applicant’s goods would immediately understand that applicant’s identified cutlery items are intended for novelty purposes.

 

Accordingly, registration is refused because the applied-for mark merely describes a feature of applicant’s goods.  Trademark Act Section 2(e)(1), 15 U.S.C. §1052(e)(1); see TMEP §§1209.01(b), 1209.03 et seq.

 

Advisory: Section 2(f) Suggested

 

The application record indicates that applicant has used its mark for a long time; therefore, applicant has the option to amend the application to assert a claim of acquired distinctiveness under Trademark Act Section 2(f).  See 15 U.S.C. §1052(f); TMEP §1212.05.

 

To amend the application to Section 2(f) based on five years’ use, applicant should request that the application be amended to assert a claim of acquired distinctiveness under Section 2(f) and submit the following written statement claiming acquired distinctiveness, if accurate:

 

The mark has become distinctive of the goods and/or services through the applicant’s substantially exclusive and continuous use of the mark in commerce that the U.S. Congress may lawfully regulate for at least the five years immediately before the date of this statement.

 

TMEP §1212.05(d); see 15 U.S.C. §1052(f); 37 C.F.R. §2.41(a)(2); TMEP §1212.08.  This statement must be verified with an affidavit or signed declaration under 37 C.F.R. §2.20.  37 C.F.R. §2.41(a)(2); TMEP §1212.05(d); see 37 C.F.R. §2.193(e)(1).

 

Applicant is advised that, if the application is amended to seek registration on the Principal Register under Trademark Act Section 2(f) or on the Supplemental Register, applicant will be required to disclaim “CUTLERY” because such wording appears to be generic in the context of applicant’s goods.  See 15 U.S.C. §1056(a); In re Wella Corp., 565 F.2d 143, 144, 196 USPQ 7, 8 (C.C.P.A. 1977); In re Creative Goldsmiths of Wash., Inc., 229 USPQ 766, 768 (TTAB 1986); TMEP §1213.03(b).

 

Applicant may submit a disclaimer in the following format:

 

No claim is made to the exclusive right to use “CUTLERY” apart from the mark as shown.

 

TMEP §1213.08(a)(i).

 

For an overview of disclaimers and instructions on how to satisfy this issue using the Trademark Electronic Application System (TEAS), see the Disclaimer webpage.

 

Applicant should note the following additional grounds for registration refusal.

 

Refusal: Specimen Unacceptable

 

Registration is refused because the specimen does not show the mark in the drawing in use in commerce in International Class 8, which is required in the application or amendment to allege use.  Trademark Act Sections 1 and 45, 15 U.S.C. §§1051, 1127; 37 C.F.R. §§2.34(a)(1)(iv), 2.56(a); TMEP §§904, 904.07(a), 1301.04(g)(i).  The mark appearing on the specimen and in the drawing must match; that is, the mark in the drawing “must be a substantially exact representation of the mark” on the specimen.  See 37 C.F.R. §2.51(a)-(b); TMEP §807.12(a).

 

In this case, the specimen displays the mark as NOVELTY CUTLERY BOMBSHELL BARLOW FISHNET STOCKINGS.  However, the drawing displays the mark as NOVELTY CUTLERY.  The mark on the specimen does not match the mark in the drawing because the mark on the specimen contains additional distinctive wording that alters the commercial impression of the mark.  Applicant has thus failed to provide the required evidence of use of the mark in commerce.  See TMEP §807.12(a).

 

Applicant may respond to this refusal by satisfying one of the following:

 

(1)       Submit a different specimen (a verified “substitute” specimen) for each applicable international class that (a) shows the mark in the drawing in actual use in commerce for the goods and/or services in the application or amendment to allege use, and (b) was in actual use in commerce at least as early as the filing date of the application or prior to the filing of an amendment to allege use.

 

Examples of specimens for goods include tags, labels, instruction manuals, containers, photographs that show the mark on the actual goods or packaging, and displays associated with the actual goods at their point of sale.  See TMEP §§904.03 et seq.  Webpages may also be specimens for goods when they include a picture or textual description of the goods associated with the mark and the means to order the goods.  TMEP §904.03(i).  Examples of specimens for services include advertising and marketing materials, brochures, photographs of business signage and billboards, and webpages that show the mark used in the actual sale, rendering, or advertising of the services.  See TMEP §1301.04(a), (h)(iv)(C).

 

(2)       Submit a request to amend the filing basis to intent to use under Section 1(b), for which no specimen is required.  This option will later necessitate additional fee(s) and filing requirements such as providing a specimen.

 

The USPTO will not accept an amended drawing submitted in response to this refusal because the changes would materially alter the drawing of the mark in the original application or as previously acceptably amended.  See 37 C.F.R. §2.72(a)-(b); TMEP §807.14.  Specifically, the addition of the distinctive wording “BOMBSHELL BARLOW FISHNET STOCKINGS” changes the overall commercial impression created by the mark and would necessitate an additional search of the Trademark database. 

 

For more information about drawings and instructions on how to satisfy these response options online using the Trademark Electronic Application System (TEAS) form, see the Drawing webpage.

 

Although applicant’s mark has been refused registration, applicant may respond to the refusals by submitting evidence and arguments in support of registration.  However, if applicant responds to the refusals, applicant must also respond to the requirements set forth below.

 

Requirement: Indefinite Identification of Goods

 

Applicant’s use of the semicolon following the term “cutlery” in the identification of goods renders the identification unacceptable as indefinite.  Applicant must correct the punctuation in the identification to clarify the individual items in the list of goods and/or services.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01(a).  Proper punctuation in identifications is necessary to delineate explicitly each product or service within a list and to avoid ambiguity.  Commas, semicolons, and apostrophes are the only punctuation that should be used in an identification of goods and/or services.  TMEP §1402.01(a).  An applicant should not use colons, periods, exclamation points, and question marks in an identification.  Id.  In addition, applicants should not use symbols in the identification such as asterisks (*), at symbols (@), or carets.  Id.

 

In general, commas should be used in an identification (1) to separate a series of related items identified within a particular category of goods or services, (2) before and after “namely,” and (3) between each item in a list of goods or services following “namely” (e.g., personal care products, namely, body lotion, bar soap, shampoo).  Id.  Semicolons generally should be used to separate a series of distinct categories of goods or services within an international class (e.g., personal care products, namely, body lotion; deodorizers for pets; glass cleaners).  Id. 

 

Applicant may adopt the following amended identification, if accurate:

 

            Class 8:           Cutlery, namely, pocket, hunting, and boot knives

 

TMEP §1402.01.

 

Applicant may amend the identification to clarify or limit the goods and/or services, but not to broaden or expand the goods and/or services beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods and/or services may not later be reinserted.  See TMEP §1402.07(e).

 

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

Requirement: Unsigned Application

 

The application was unsigned, resulting in the application not being properly verified.  See TMEP §804.  Applicant must properly sign and therefore verify the application in an affidavit or signed declaration under 37 C.F.R. §2.20.  See 37 C.F.R. §§2.2(n), 2.33(a)-(b)(1), (c), 2.34(a)(1)(i); TMEP §804.02. 

 

The following statements must be verified:  That applicant believes applicant is the owner of the mark; that the mark is in use in commerce and was in use in commerce as of the application filing date; that to the best of the signatory’s knowledge and belief, no other persons, except, if applicable, concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other persons, to cause confusion or mistake, or to deceive; that the specimen shows the mark as used on or in connection with the goods or services as of the application filing date; and that the facts set forth in the application are true.  37 C.F.R. §§2.33(b)(1), (c), 2.34(a)(1)(i), 2.59(a).  For more information about this, see the Verified statement webpage.

 

To provide these verified statements.  After opening the correct TEAS response form, answer “yes” to wizard question #10, and follow the instructions within the form for signing.  In this case, the form will require two signatures:  one in the “Declaration Signature” section and one in the “Response Signature” section.

 

Advisory: If You Have Questions or Need Assistance

 

Please call or email the assigned trademark examining attorney with questions about this Office action.  Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the refusal(s) and/or requirement(s) in this Office action.  See TMEP §§705.02, 709.06.  Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05. 

 

For general inquiries about the trademark application process or assistance with navigating the USPTO web site and/or online TEAS forms, please contact the Trademark Assistance Center by telephone at (800) 786-9199 or e-mail TrademarkAssistanceCenter@uspto.gov.

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

 

 

/David S. Miller/

David S. Miller

Managing Attorney, Law Office 120

U.S. Patent and Trademark Office

571-272-8956

david.miller@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 12/12/2018 FOR U.S. APPLICATION SERIAL NO. 88112210

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 12/12/2018 (or sooner if specified in the Office action).  A response transmitted through the Trademark Electronic Application System (TEAS) must be received before midnight Eastern Time of the last day of the response period.  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the TEAS response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.