UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.  A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.

 

ISSUE/MAILING DATE: 12/17/2018

 

INTRODUCTION

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SUMMARY OF ISSUES

• Trademark Section 2(d) Refusal – Likelihood of Confusion
• Identification of Goods Requires Amendment

 

SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION

Registration of the applied-for mark is refused because of a likelihood of confusion with the mark in U.S. Registration No. 3540812.  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the attached registration.

 

Trademark Act Section 2(d) bars registration of an applied-for mark that so resembles a registered mark that it is likely a potential consumer would be confused, mistaken, or deceived as to the source of the goods of the applicant and registrant.  See 15 U.S.C. §1052(d).  A determination of likelihood of confusion under Section 2(d) is made on a case-by-case basis and the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) aid in this determination.  Citigroup Inc. v. Capital City Bank Grp., Inc., 637 F.3d 1344, 1349, 98 USPQ2d 1253, 1256 (Fed. Cir. 2011) (citing On-Line Careline, Inc. v. Am. Online, Inc., 229 F.3d 1080, 1085, 56 USPQ2d 1471, 1474 (Fed. Cir. 2000)).  Not all the du Pont factors, however, are necessarily relevant or of equal weight, and any one of the factors may control in a given case, depending upon the evidence of record.  Citigroup Inc. v. Capital City Bank Grp., Inc., 637 F.3d at 1355, 98 USPQ2d at 1260; In re Majestic Distilling Co., 315 F.3d 1311, 1315, 65 USPQ2d 1201, 1204 (Fed. Cir. 2003); see In re E. I. du Pont de Nemours & Co., 476 F.2d at 1361-62, 177 USPQ at 567.

 

In this case, the following factors are the most relevant:  similarity of the marks, similarity and nature of the goods, and similarity of the trade channels of the goods.  See In re Viterra Inc., 671 F.3d 1358, 1361-62, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Dakin’s Miniatures Inc., 59 USPQ2d 1593, 1595-96 (TTAB 1999); TMEP §§1207.01 et seq.

 

Similarity of the Marks

Applicant’s mark is LANDMARK in standard character form.

 

Registrant’s mark is LANDMARK ACCENTS in standard character form.

 

Marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression.  Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1321, 110 USPQ2d 1157, 1160 (Fed. Cir. 2014) (quoting Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1371, 73 USPQ2d 1689, 1691 (Fed. Cir. 2005)); TMEP §1207.01(b)-(b)(v).  “Similarity in any one of these elements may be sufficient to find the marks confusingly similar.”  In re Davia, 110 USPQ2d 1810, 1812 (TTAB 2014) (citing In re 1st USA Realty Prof’ls, Inc., 84 USPQ2d 1581, 1586 (TTAB 2007)); In re White Swan Ltd., 8 USPQ2d 1534, 1535 (TTAB 1988)); TMEP §1207.01(b).

 

When comparing marks, “[t]he proper test is not a side-by-side comparison of the marks, but instead whether the marks are sufficiently similar in terms of their commercial impression such that [consumers] who encounter the marks would be likely to assume a connection between the parties.”  Cai v. Diamond Hong, Inc., __ F.3d __, 127 USPQ2d 1797, 1801 (Fed. Cir. 2018) (quoting Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1368, 101 USPQ2d 1713, 1721 (Fed. Cir. 2012)); TMEP §1207.01(b).  The proper focus is on the recollection of the average purchaser, who retains a general rather than specific impression of trademarks.  In re Inn at St. John’s, LLC, 126 USPQ2d 1742, 1746 (TTAB 2018) (citing In re St. Helena Hosp., 774 F.3d 747, 750-51, 113 USPQ2d 1082, 1085 (Fed. Cir. 2014); Geigy Chem. Corp. v. Atlas Chem. Indus., Inc., 438 F.2d 1005, 1007, 169 USPQ 39, 40 (CCPA 1971)); TMEP §1207.01(b).

 

In this case, applicant’s mark and registrant’s mark create substantially similar commercial impressions because they share the arbitrary wording “LANDMARK.” Marks may be confusingly similar in appearance where similar terms or phrases or similar parts of terms or phrases appear in the compared marks and create a similar overall commercial impression.  See Crocker Nat’l Bank v. Canadian Imperial Bank of Commerce, 228 USPQ 689, 690-91 (TTAB 1986), aff’d sub nom. Canadian Imperial Bank of Commerce v. Wells Fargo Bank, Nat’l Ass’n, 811 F.2d 1490, 1495, 1 USPQ2d 1813, 1817 (Fed. Cir. 1987) (finding COMMCASH and COMMUNICASH confusingly similar); In re Corning Glass Works, 229 USPQ 65, 66 (TTAB 1985) (finding CONFIRM and CONFIRMCELLS confusingly similar); In re Pellerin Milnor Corp., 221 USPQ 558, 560 (TTAB 1983) (finding MILTRON and MILLTRONICS confusingly similar); TMEP §1207.01(b)(ii)-(iii).

 

The additional wording in the applied-for mark does not obviate the similarity because consumers are more likely to focus on the first term in a trademark.  Therefore, the marks are confusingly similar. Consumers are generally more inclined to focus on the first word, prefix, or syllable in any trademark.  See Palm Bay Imps., Inc. v. Veuve Clicquot Ponsardin Maison Fondee En 1772, 396 F.3d 1369, 1372, 73 USPQ2d 1689, 1692 (Fed. Cir. 2005) (“VEUVE . . . remains a ‘prominent feature’ as the first word in the mark and the first word to appear on the label”); In re Integrated Embedded, 120 USPQ2d 1504, 1513 (TTAB 2016) (“[T]he dominance of BARR in [a]pplicant’s mark BARR GROUP is reinforced by its location as the first word in the mark.”); Presto Prods., Inc. v. Nice-Pak Prods., Inc., 9 USPQ2d 1895, 1897 (TTAB 1988) (“it is often the first part of a mark which is most likely to be impressed upon the mind of a purchaser and remembered” when making purchasing decisions).

 

The mere deletion of wording from a registered mark does not obviate the relatedness of the marks. Although applicant’s mark does not contain the entirety of the registered mark, applicant’s mark is likely to appear to prospective purchasers as a shortened form of registrant’s mark.  See In re Mighty Leaf Tea, 601 F.3d 1342, 1348, 94 USPQ2d 1257, 1260 (Fed. Cir. 2010) (quoting United States Shoe Corp., 229 USPQ707, 709 (TTAB 1985)).  Thus, merely omitting some of the wording from a registered mark may not overcome a likelihood of confusion.  See In re Mighty Leaf Tea, 601 F.3d 1342, 94 USPQ2d 1257; In re Optica Int’l, 196 USPQ 775, 778 (TTAB 1977); TMEP §1207.01(b)(ii)-(iii).  In this case, applicant’s mark does not create a distinct commercial impression from the registered mark because it contains all the wording in the registered mark and does not add any wording that would distinguish it from that mark. 

 

Therefore, the marks are confusingly similar.

 

Relatedness of Goods

Applicant’s goods are identified as “Woven plastic in sheet and fabric form for agricultural, horticultural, industrial and domestic use; fabrics and sheets for greenhouses, windbreaks, screens, awnings and tents.”

 

Registrant’s goods are identified as “Non-metal pre-molded architectural products used as columns, posts, pillars, panels and other building forms made of polyurethane foam.”

 

The compared goods need not be identical or even competitive to find a likelihood of confusion.  See On-line Careline Inc. v. Am. Online Inc., 229 F.3d 1080, 1086, 56 USPQ2d 1471, 1475 (Fed. Cir. 2000); Recot, Inc. v. Becton, 214 F.3d 1322, 1329, 54 USPQ2d 1894, 1898 (Fed. Cir. 2000); TMEP §1207.01(a)(i).  They need only be “related in some manner and/or if the circumstances surrounding their marketing are such that they could give rise to the mistaken belief that the goods emanate from the same source.”  Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).

 

Determining likelihood of confusion is based on the description of the goods stated in the application and registration at issue, not on extrinsic evidence of actual use.  See In re Detroit Athletic Co., 903 F.3d 1297, 1307, 128 USPQ2d 1047, 1052 (Fed. Cir. 2018) (citing In re i.am.symbolic, llc, 866 F.3d 1315, 1325, 123 USPQ2d 1744, 1749 (Fed. Cir. 2017)).  

 

In this case, the application uses broad wording to describe the relevant broad goods, which presumably encompasses all goods of the type described in Applicant’s more narrow identification of goods.  See, e.g., In re Solid State Design Inc., 125 USPQ2d 1409, 1412-15 (TTAB 2018).  In the present case, Applicant’s identification of goods include “sheets for greenhouses, windbreaks, screens, awnings and tents” which is overbroad and can include panels and other building forms made of polyurethane foam as evidenced by the attached website screenshot from http://www.newenglandfoam.com (Fabricated Foam Sheets) which shows that polyurethane foam can come in sheet form. Additionally, the goods of the parties have no restrictions as to nature, type, channels of trade, or classes of purchasers and are “presumed to travel in the same channels of trade to the same class of purchasers.”  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)).  Thus, applicant’s and registrant’s goods are related.

 

The overriding concern is not only to prevent buyer confusion as to the source of the goods, but to protect the registrant from adverse commercial impact due to use of a similar mark by a newcomer.  See In re Shell Oil Co., 992 F.2d 1204, 1208, 26 USPQ2d 1687, 1690 (Fed. Cir. 1993).  Therefore, any doubt regarding a likelihood of confusion determination is resolved in favor of the registrant.  TMEP §1207.01(d)(i); see Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1265, 62 USPQ2d 1001, 1003 (Fed. Cir. 2002); In re Hyper Shoppes (Ohio), Inc., 837 F.2d 463, 464-65, 6 USPQ2d 1025, 1026 (Fed. Cir. 1988).

 

In summary, the applicant’s and registrant’s marks create the same commercial impression and the respective goods are highly related. Therefore, consumers are likely to be confused and mistakenly believe that these goods originate from a common source. Accordingly, registration must be refused under Section 2(d) of the Trademark Act.

Although applicant’s mark has been refused registration, applicant may respond to the refusal(s) by submitting evidence and arguments in support of registration. If applicant responds to the refusal, applicant must also respond to the requirement set forth below.

 

IDENTIFICATION OF GOODS REQUIRES AMENDMENT

The following wording is unacceptable because the goods are not identified clearly enough and Applicant needs to specify the nature and type of the identified goods:  Woven plastic in sheet and fabric form for agricultural, horticultural, industrial and domestic use; fabrics and sheets for greenhouses, windbreaks, screens, awnings and tents. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01. Please see below for suggestions.

 

The wording “woven plastic in sheet and fabric form” in the identification of goods for International Class 17 must be clarified because it is too broad and could include goods in other international classes.  See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03.  Plastic sheets are generally classified according to function or purpose of the goods: Class 16 for “wrapping or packaging” purposes, and Class 17 for “packing” or non-wrapping purposes, as well as plastics in extruded form for use in further manufacture. In addition, plastic sheet material for use as a drop cloth, or for use in preventing weed growth, will be classified in Class 17. Plastic sheet material used to prevent erosion will be classified in Class 19. Plastic or vinyl sheet material that performs a tarp-like function (e.g., unfitted swimming pool or hot tub covers, unfitted vehicle covers, unfitted, tarp-like liners for the cargo areas of pick-up trucks) is classified in Class 22.  Plastic film for industrial or commercial packing is in Class 17. Food wrapping plastic film for household use and plastic film for packaging are classified in Class 16.

 

The wording “fabrics and sheets for greenhouses, windbreaks, screens, awnings and tents” in the identification of goods for International Class 17 must be clarified because it is too broad and could include goods in other international classes.  See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03.  In particular, this wording could encompass geotextiles, namely, fabric and sheeting in Class 19.

 

To permit proper examination of the application, applicant must submit additional product information about applicant’s goods because the nature of such goods is not clear from the present record.  See 37 C.F.R. §2.61(b); TMEP §814.  The requested product information should include fact sheets, instruction manuals, advertisements and promotional materials, and/or a photograph of the identified goods.  If these materials are unavailable, applicant should submit similar documentation for goods of the same type, explaining how its own product will differ.  Applicant must also describe in detail the nature, purpose, and channels of trade of the goods.

 

Factual information about the goods must clearly indicate how they operate, their salient features, and their prospective customers and channels of trade. 

 

Failure to comply with a request for information is grounds for refusing registration.  In re Harley, 119 USPQ2d 1755, 1757-58 (TTAB 2016); TMEP §814.  Merely stating that information about the goods is available on applicant’s website is an insufficient response and will not make the relevant information of record.  See In re Planalytics, Inc., 70 USPQ2d 1453, 1457-58 (TTAB 2004).

 

Applicant may substitute the following wording, if accurate: 

 

International Class 16

Woven plastic in sheet form for horticultural use, namely, {specify purpose of plastic sheets e.g., plastic sheets for wrapping and packaging}; Woven plastic in sheet for industrial use, namely, {specify type e.g., plastic sheets for packaging, self-adhesive plastic sheets for lining shelves}; Woven plastic in sheet form for domestic use, namely, {specify type e.g., Plastic sheets for wrapping and packaging}

 

International Class 17

Plastic sheeting for agricultural purposes, namely, woven plastic in sheet form; Woven plastic in sheet for industrial use, namely, {specify type e.g., plastic sheets for use in the manufacture of labels, plastic sheets for use in the manufacture of displays, signs and packaging, plastic sheeting used in the construction industry as a vapor barrier}; Sheets of woven plastic fabric used as an insulating infiltration barrier in building construction for industrial purposes; insulating fabrics and graphite sheets for insulating to be used in greenhouses, windbreaks, screens, awnings and tents

 

International Class 19

Geotextiles, namely, fabric and sheeting for {indicate construction use, e.g., for greenhouses, windbreaks, screens, awnings and tents}

 

International Class 22

Plastic-covered mesh fabric growing bags for growing plants and trees, namely, woven plastic fabric for agricultural, horticultural, and domestic use

 

Applicant may amend the identification to clarify or limit the goods, but not to broaden or expand the goods beyond those in the original application or as acceptably amended.  See 37 C.F.R. §2.71(a); TMEP §1402.06.  Generally, any deleted goods may not later be reinserted.  See TMEP §1402.07(e).

 

For assistance with identifying and classifying goods in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual.  See TMEP §1402.04.

 

MULTIPLE CLASS APPLICATION REQUIREMENT

The application identifies goods in more than one international class; therefore, applicant must satisfy all the requirements below for each international class based on Trademark Act Sections 1(b):

 

(1)       List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class.

 

(2)       Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule).  The application identifies goods that are classified in at least four classes; however, applicant submitted fees sufficient for only one class.  Applicant must either submit the filing fees for the classes not covered by the submitted fees or restrict the application to the number of classes covered by the fees already paid.

 

See 15 U.S.C. §§1051(b), 1112, 1126(e); 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(2)-(3), 2.86(a); TMEP §§1403.01, 1403.02(c).

 

See an overview of the requirements for a Sections 1(b) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form.

 

Applicable Fees

The fee for adding classes to a TEAS Reduced Fee (RF) application is $275 per class.  See 37 C.F.R. §§2.6(a)(1)(iii), 2.23(a).  See more information regarding the requirements for maintaining the lower TEAS RF fee and, if these requirements are not satisfied, for adding classes at a higher fee using regular TEAS.

 

RESPONSE GUIDELINES

If applicant has questions regarding this Office action, please telephone or e-mail the assigned trademark examining attorney. All relevant e-mail communications will be placed in the official application record; however, an e-mail communication will not be accepted as a response to this Office action and will not extend the deadline for filing a proper response. See 37 C.F.R. §2.191; TMEP §§304.01-.02, 709.04-.05. Further, although the trademark examining attorney may provide additional explanation pertaining to the refusal(s) and/or requirement(s) in this Office action, the trademark examining attorney may not provide legal advice or statements about applicant’s rights. See TMEP §§705.02, 709.06.

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.  

 

/Cristel John/

Trademark Examining Attorney

Law Office 125

(571) 272-5412

cristel.john@uspto.gov

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 12/17/2018 FOR U.S. APPLICATION SERIAL NO. 88091590

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 12/17/2018 (or sooner if specified in the Office action).  A response transmitted through the Trademark Electronic Application System (TEAS) must be received before midnight Eastern Time of the last day of the response period.  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the TEAS response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.