|
NOTICE OF ALLOWANCE (NOA)
ISSUE DATE: Feb 19, 2019 |
U.S. Serial Number: 87734140
Mark: METABO HPT (Stylized/Design)
Docket/Reference Number: 1072331
|
| No opposition was filed for this published application. The issue date of this NOA establishes the due date for the filing of
a Statement of Use (SOU) or a Request for Extension of Time to file a Statement of Use (Extension Request). WARNING: An SOU that meets all legal requirements must be filed before a registration
certificate can issue. Please read below for important information regarding the applicant's pending six (6) month deadline. |
| SIX (6)-MONTH DEADLINE: Applicant has six (6) MONTHS from the NOA issue date to file either: |
| - |
An SOU, if the applicant is using the mark in commerce (required even if the applicant was using the mark at the time of filing the
application, if use basis was not specified originally); OR |
| - |
An Extension Request, if the applicant is not yet using the mark in commerce. If an Extension Request is filed, a new request must
be filed every six (6) months until the SOU is filed. The applicant may file a total of five (5) extension requests. WARNING: An SOU may not be filed more than thirty-six
(36) months from when the NOA issued. The deadline for filing is always calculated from the issue date of the NOA. |
How to file SOU and/or Extension Request:
Use the Trademark Electronic Application System (TEAS). Do NOT reply to this e-mail, as e-mailed filings will NOT be processed. Both the SOU and Extension Request have many
legal requirements, including fees and verified statements; therefore, please use the USPTO forms available online at http://www.gov.uspto.report/trademarks-application-process/filing-online (under the "INTENT-TO-USE (ITU) FORMS" category) to avoid the possible omission of required information.
If you have questions about this notice, please contact the Trademark Assistance Center at 1-800-786-9199. |
| FAILURE TO FILE A REQUIRED DOCUMENT OUTLINED ABOVE DURING THE APPROPRIATE TIME PERIOD WILL RESULT IN THE ABANDONMENT OF THIS
APPLICATION. |
REVIEW APPLICATION INFORMATION FOR ACCURACY |
| Serial Number: |
87734140
|
| Mark: |
METABO HPT (Stylized/Design)
|
| Docket/Reference Number: |
1072331
|
| Owner: |
KOKI HOLDINGS CO., LTD.
15-1, KONAN 2-CHOME, MINATO-KU
TOKYO , JAPAN 108-6020
|
| Correspondence Address: |
BRIAN O'DONNELL
KILPATRICK TOWNSEND & STOCKTON LLP
1400 WEWATTA STREET, SUITE 600
DENVER, CO 80202
|
This application has the following bases, but not necessarily for all listed goods/services: |
|
Section 1(a): NO |
Section 1(b): YES |
Section 44(e): NO |
| GOODS/SERVICES BY INTERNATIONAL CLASS |
| 006 - |
Metal hardware, namely, nails, washers, nuts, screws, metal upholstery tacks, carpet tacks , metal carpet tack strips, plugs, bolts, rivets, binding bands of
metal, buckles, door stops of metal, gate stops of metal, window stops of metal, metal cabinet stops, pegs, pins, latch bars, screw rings of metal, ring-shaped fittings of metal, staples for
construction or industrial use, metal casters; wire ropes; bands of metal for tying-up purposes; industrial packaging containers of metal; containers of metal for compressed gas or liquid air;
containers of metal for liquid fuel; tool boxes of metal, empty; loading and unloading pallets of metal -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
| 007 - |
Agitators for circulating liquid media; agitators for chemical processing; industrial paint agitating machines; Apparatus for machining, namely, wood sawing
machines, electric wood saw machines, wood planing machines, wood grinding machines, and wood milling machines; aprons being parts of machines; atomizers being machines, namely, power operated
atomizers for industrial or agricultural use; bellows being machines; bending machines; blade sharpening and stropping machines; blades being parts of machines for metalworking, mining, construction,
chemical processing, food or beverage processing, lumbering, woodworking, veneer or plywood making, stone working, repairing or fixing; blowing engines, namely, engines for dust removing
installations for cleaning purposes; blowing machines, namely, dust removing installations for cleaning purposes; brushes being parts of machines; brushes, electrically operated being parts of
machines; centrifugal machines; centrifugal pumps; centrifuges being machines; chain saws; chisels for machines; chucks being parts of machines, namely, chucks for power drills; cleaning appliances
utilizing steam; clippers being machines, namely, wood or metal plate, plywood clipping machines; coal-cutting machines; compressed air machines; compressed air pumps; compressors being machines;
compressors for refrigerators; concrete mixers being machines; crushing machines, namely, crushing machines for industrial purposes; cultivators being machines, namely, motorized cultivators; current
generators; cutting machines; die-cutting, nut, and screw tapping machines; disintegrators for chemical processing; ditchers and ploughs; drill chucks being parts of machines; drilling bits being
parts of machines, namely, bits for power drills; drilling heads being parts of machines; drilling machines; dynamos; earth moving machines; electric arc cutting apparatus; electric arc welding
apparatus; electric hammers; electric hand drills; electric welding apparatus, namely, electric welding machines; embossing machines; emergency power generators; engines for boats; engines, other
than for land vehicles; engraving machines; excavators; finishing machines, namely, concrete finishing machines; electromechanical food preparation machines, namely, food slicing machines for
commercial use; electromechanical kitchen appliance for dicing, mincing, slicing, and chopping food; foundry machines, namely, machines for creating metal molds; found machines, namely, machines for
creating foundry-chill molds; generators of electricity; glue guns, electric; electric grinders and crushers, namely, crushing, wood-shaving, metal-shaving, stone-shaving, and concrete-shaving
machines for household purposes; grinding machines; harrows, namely, motorized cultivator-towed harrows; hemming machines; high pressure washers; igniting devices for internal combustion engines;
igniting magnetos; knives for mowing machines; lathes being machine tools; machine wheelwork; electric machines and apparatus for cleaning, namely, compressed air cleaning machines, vacuum cleaners,
and high pressure washers; electric machines and apparatus for polishing, namely, floor polishers; meat choppers being machines for commercial use; power-operated meat mincers being machines; milling
machines; mine borers; molding machines, namely, injection molding machines; mortising machines; motorized cultivators; motors for boats; motors, other than for land vehicles; mowing and reaping
machines; mufflers for motors and engines; nail extractors, electric; nail pullers, electric; nut-tapping machines; paring machines, namely, machines for trimming wood surfaces; peeling machines,
namely, electric food peeling machines for commercial use; planing machines; pneumatic hammers; power hammers; presses being machines for industrial purposes, namely, industrial machine presses;
pumps being machines, namely , electric pumps; pumps being parts of machines, engines or motors; rammers being machines ; saws being machines; scissors, electric; sharpening machines; sharpening
wheels being parts of machines; sheaf-binding machines; shears, electric; shredders being machines for industrial use; snow ploughs; spray guns for paint; spraying machines; threading machines ;
trimming machines; turbocompressors; vacuum cleaner bags; vacuum cleaner hoses; vacuum pumps; metalworking machines and tools, namely, punching presses, shaping machines, metal sawing machines,
perforating machines, slotting machines, boring machines, gear cutting and finishing machines, broaching machines, honing machines, lapping machines, mechanical presses, shearing machines, forging
machines, oil hydraulic presses, electric metal cutting machines, namely, power-operated abrasive wheels and grindstones, electric welding machines, hand-held pneumatic drills, hand-held pneumatic
hammers, electric sanders, power-driven wrenches, hand-held power driven grinders, hand-held electric drills, hand-held electric hammers, power driven screwdrivers, power driven nut runners, power
driven buffers, power driven polishers, gear cutters, taps other than hand-held tools, chasers being machine tools, thread milling cutters being machine tools, turning point tools being machine
tools, namely, turning tools for metalworking, broaches other than hand-held tools, namely, broaches being machines tools, milling cutters being machine tools, reamers other than hand-held tools,
namely, reamers being power tools, cemented carbide tools for cutting, cemented carbide cutting tools, anticorrosive cemented carbide cutting tools, anti-abrasive cemented carbide cutting tools,
cemented carbide tips, diamond-pointed metal cutting tools, wear-resistant powered metal cutting tools, forging moulds, press dies for metal forming; mining machines and apparatus, namely, rock
drills, mining drill sharpeners, mine borers, coal loaders; construction machines and apparatus, namely, rooters in the nature of root cutting machines, pile drivers, pile extractors, earth scrapers,
tamping machines, concrete placing machines, concrete vibrators, concrete paving machines, asphalt mixers; loading-unloading machines and apparatus, namely, winches, chain blocks, hoists; chemical
processing machines and apparatus, namely, presses, absorbing machines in the nature of dust removing installations for cleaning purposes, mixing or blending machines, dust collecting machines,
sintering machines, calcining machines, cleaning machines in the nature of high pressure cleaners, disintegrators, partial condensors in the nature of air condensors, separating machines, grinding
mills, dissolving machines, filtering machines; lumbering, woodworking, or veneer or plywood making machines and apparatus, namely, lumbering band saws, special sawing machines in the nature of
routers and trimmers, saw-tooth setting machines, circular saws, tenoning machines, wood planing machines, wood lathes, wood milling machines, wood drilling machines, sanding machines, wood sawing
machines, woodworking saw-tooth setting machines; agricultural machines, agricultural implements other than hand-operated, namely, power tillers and reapers; stone working machines; pneumatic or
hydraulic machines and instruments, namely, reciprocating compressors, reciprocating water pumps, rotary pumps, axial flow pumps, reciprocating vacuum pumps, rotary vacuum pumps, diffusion pumps,
centrifugal blowers, rotary blowers, axial flow blowers, turbo blowers in the nature of blowing air machines for construction or industrial use, centrifugal compressors, reciprocating compressors,
rotary compressors, axial flow compressors; washing machines for laundry use; vehicle washing installations; food mixing machines for commercial use; food peeling machines for commercial use; food
cutting, chopping and slicing machines for commercial use; machine elements, not for land vehicles, namely, shafts in the nature of shaft couplings for machines, axles for machines, and spindles
being parts of machines; connectors, namely, connecting rods for machines, bearings in the nature of shaft bearings for machines, clutch mechanisms for machines, reduction gears, toothed machines
wheels, machine gears, speed change gears, fluid couplings; lawnmowers; waste compacting machines; waste crushing machines; starters for motors and engines; electric motors for machines, namely, AC
motors and DC motors, not including those for land vehicles; parts for AC motors and DC motors, namely, brushes being parts of motors; AC generators; DC generators; electric food blenders for
household purposes; dynamo brushes -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
| 008 - |
Abrading tools being hand instruments; bits being parts of hand tools, namely, bits for hand drills; blade sharpening instruments, namely, sharpening wheels for
knives and blades; blades for planes; cutting tools being hand operated tools; manual drills; files being tools; gimlets being hand tools; gouges being hand tools; grindstones being hand tools;
hollowing bits being parts of hand tools; hoop cutters being hand operated tools; non-electric caulking guns; saws being hand tools; stamping out tools being hand tools; whetstones; wrenches being
hand tools; electric razors and electric hair clippers; bladed and pointed hand tools, namely, gardening shears and scissors, planes, chisels, taps, milling cutters, files, reamers; hand tools,
namely, bushhammers, mallets, hammers, spanners, screwdrivers, adjustable spanners, wrenches, nail pullers, nippers, pliers, cutting pliers, tongs, namely, fire tongs, construction tongs, food tongs,
spades, gardening trowels, shovels, snow shovels, carpenter's compasses; sharpening wheels for knives and blades; hand tools, namely, manually operated sharpening wheels -- FIRST USE DATE: NONE; --
USE IN COMMERCE DATE: NONE |
| 009 - |
Electric accumulators; electric batteries; battery boxes; battery chargers; condensers and capacitors for telecommunication machines and electronic machines;
radios; respirators for filtering air; sound reproduction apparatus; solar batteries; electrical batteries and cells; electric and magnetic meters and testers, namely, distance meters; electric wires
and cables, telecommunication machines and apparatus, namely, television receivers and radio receivers; electrodes, other than welding electrodes or medical electrodes; dust masks; welding masks;
gloves for protection against accidents spectacles, eyeglasses and goggles in the nature of safety goggles; air tanks for scuba diving -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE:
NONE |
| 037 - |
Construction project management services; construction consultancy; shipbuilding; repair or maintenance of vessels; aircraft repair or maintenance; repair of
bicycles; repair or maintenance of automobiles; repair or maintenance of railway rolling stocks; repair or maintenance of optical machines and apparatus; repair or maintenance of loading-unloading
machines and apparatus; repair or maintenance of pumps; repair or maintenance of freezing machines and apparatus; repair or maintenance of electronic machines and apparatus; repair or maintenance of
telecommunication machines and apparatus; repair or maintenance of construction machines and apparatus; repair and maintenance of consumer electric appliances; repair or maintenance of electric
lighting apparatus; repair or maintenance of electric motors; repair or maintenance of power distribution or control machines and apparatus; repair or maintenance of power generators; repair or
maintenance of laboratory apparatus and instruments, repair or maintenance of measuring and testing machines and instruments; repair or maintenance of medical apparatus and instruments; repair or
maintenance of printing or bookbinding machines and apparatus; repair or maintenance of chemical processing machines and apparatus; repair or maintenance of glassware manufacturing machines and
apparatus; repair or maintenance of fishing machines and instruments; repair or maintenance of metalworking machines and tools; repair or maintenance of shoe making machines; repair or maintenance of
industrial furnaces; repair or maintenance of mining machines and apparatus; repair or maintenance of rubber-goods manufacturing machines and apparatus; repair or maintenance of machines and
apparatus for processing foods or beverages; repair or maintenance of machines and apparatus for lumbering, woodworking, or veneer or plywood making; repair or maintenance of textile machines and
apparatus; repair or maintenance of painting machines and apparatus; repair or maintenance of agricultural machines and implements; repair or maintenance of machines and apparatus for pulp-making,
papermaking or paper working; repair or maintenance of plastic processing machines and apparatus; repair or maintenance of packaging and wrapping machines and apparatus; repair or maintenance of
industrial dishwashers; repair or maintenance of electric washing machines for industrial purposes; repair or maintenance of vehicle washing installations; repair or maintenance of vending machines;
repair or maintenance of power-driven floor cleaning machines; repair or maintenance of waste compacting machines and apparatus; repair or maintenance of waste crushing machines; repair or
maintenance of diver's apparatus; repair or maintenance of signboards; repair of sports equipment; repair or maintenance of bath fittings; cleaning of building exterior surfaces; window cleaning;
carpet and rug cleaning; floor polishing; bathtub and bath boiler cleaning; street cleaning; reservoir cleaning services; disinfecting of telephone hand-sets; vermin exterminating other than for
agriculture, horticulture or forestry; sterilization of medical apparatus and instruments; rental of construction machines and apparatus; rental of floor cleaning machines; rental of mining machines
and apparatus; rental of drainage pumps -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE |
ALL OF THE GOODS/SERVICES IN EACH CLASS ARE LISTED.
|
| Appropriate Specimens for Goods and/or Services: A trademark specimen should be a label, tag, or container for the goods, or a
display associated with the goods. See TMEP §§904.03 et seq. A service mark specimen should be an advertisement, sign, brochure, website printout or other image that shows the mark used in the actual
sale or advertising of the services. See TMEP §§1301.04 et seq. For an instructional video on what is an appropriate trademark or service mark specimen for a good and/or service, click here. |
| Fraudulent statements may result in registration being cancelled: Applicants must ensure that statements made in filings to the
USPTO are accurate, as inaccuracies may result in the cancellation of any issued trademark registration. The lack of a bona fide intention to use the mark with ALL goods and/or services listed
in an application or the lack of actual use on all goods and/or services for which use is claimed could jeopardize the validity of the registration, possibly resulting in its
cancellation. |
| Additional information: For information on filing and maintenance requirements for U.S. trademark applications and registrations
and required fees, please consult the USPTO website at http://www.uspto.gov or call the Trademark Assistance Center at 1-800-786-9199. |
|