Extension of Time to File SOU

PTO- 1581

Approved for use through 03/31/2024. OMB 0651-0054

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

---

PTO- 1581

Approved for use through 03/31/2024. OMB 0651-0054

U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB control number

SOU Extension Request
(15 U.S.C. Section 1051(d))

To the Commissioner for Trademarks:

MARK: NSS (see, http://uspto.report/TM/87593839/mark.png)
SERIAL NUMBER: 87593839

OWNER AND/OR ENTITY INFORMATION
The owner proposes to amend the following:
Current: NIPPON STEEL CORPORATION, having an address of
      6-1, MARUNOUCHI 2-CHOME
      CHIYODA-KU, TOKYO, 100-8071
      Japan
      Email: XXXX
Proposed: NIPPON STEEL CORPORATION, having an address of
      6-1, MARUNOUCHI 2-CHOME
      CHIYODA-KU, TOKYO, 100-8071
      Japan
      Phone:
      Fax:
      Email: XXXX

The owner requests a six-month extension of time to file the Statement of Use under 37 C.F.R. Section 2.89 in this application.    The Notice of Allowance mailing date was 04/02/2019.

For International Class 006:
Current identification: Irons and steels; nonferrous metals and their alloys; metal materials for building and construction, namely, chimney shafts of metal, stair treads of metal, fasteners for casement windows of metal, guardrails of metal, wall linings of metal, pilings of metal, gratings of metal, tunneling materials in the nature of metal pilings, fences of metal, metal shutters for building or construction, water-pipes of metal, tiles of metal, steel frames for building, boards of metal for shelves as metal materials for building or construction, hinges of metal, handrails of metal, ceiling boards of metal, doors of metal, pillars of metal, wainscotings of metal, metal beams, fire retarding doors of metal, windows of metal, window frames of metal, gates of metal, floor boards of metal for building or construction, louver doors of metal, laths of metal, frames of metal, solar battery module frame in the nature of mounts for solar batteries, metal roofing, roofing tiles of metal, roofing of metal, metal wallboards, exterior materials of metal in the nature of sheet metal, cladding of metal, reinforcing materials of metal, wall, floor and roofing panels of metal, metal ceiling boards for building or construction, duckboards of metal, roof purlins of metal, roof rafters of metal, sleepers of metal used for flooring support, joists of metal, braces of metal, diagonal beams of metal, girders of metals in the nature of support beams, metal hardware in the nature of metal supports for column bases, roof trusses of metal, roof gables of metal, metal plates for diagonal beams, and metal joinery fittings; metal hardware, namely, metal screw rings, washers of metal, reinforcing materials of metal for building, buckles of common metal, binding screws of metal for cables, and stops of metal for use in connection with solar panel mounts; prefabricated building assembly kits of metal; metal hardware, namely, security locks, keys for locks, cut nails, metal screw rings, casters of metal, nails, pegs of metal, chains of metal, washers of metal, nuts of metal, padlocks, screws, plugs of metal, bolts of metal, rivets, reinforcing materials of metal for concrete, hardware in the nature of buckles of common metal, binding screws of metal for cables; reservoirs of metal; industrial packaging containers of metal; metal moulds for forming cement, namely, metal casting forms for concrete for use in building and construction; metal pulleys; metal springs and valves, not machine elements; metal junction for pipes; metal flanges; upright sign boards of metal, not luminous nor mechanical; loading and unloading pallets of metal; containers of metal for transport; steel strip; artificial fish reefs of metal; steel sheets; steel plates; steel pipes and tubes; paint spraying booths of metal; section steel, namely, shaped cold-finished steel bars for use in connection with frames of metal, solar battery module frame, metal components for automobiles, furring strips of metal, vinyl plastic hothouses, metal materials for building or construction, prefabricated building assembly kits of metal, metal beams, pillars of metal, steel frames for building, reinforcing materials of metal, diagonal beams of metal, girders of metal, H-steel, steel angles, channel shaped steels, and I-steel; poultry cages of metal; corrugated steel plates; beacons of metal, non-luminous; road signs of metal, not luminous nor mechanical; railway points; metal keys for locks; cotter pins of metal; anchors; mooring bitts of metal; mooring bollards of metal; anvils; swage blocks; wire nets and gauzes; wire ropes; water tanks of metal for household purposes; tool boxes of metal, sold empty; tool chests of metal, sold empty; metal stepladders and ladders; metal nameplates and door nameplate; towel dispensers of metal; hat-hanging hooks of metal; letter boxes of metal; metal hardware, namely, carabiners

For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this specific class.


This is the fifth extension request. The applicant has made the following ongoing efforts to use the mark in commerce on or in connection with each of those goods/services covered by the extension request: product or service research or development ; market research ; manufacturing activities ; promotional activities ; steps to acquire distributors

Correspondence Information (current):
      Holly M. Ford Lewis
      PRIMARY EMAIL FOR CORRESPONDENCE: trademarkgroup@oliff.com
      SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED

Correspondence Information (proposed):
      Holly M. Ford Lewis
      PRIMARY EMAIL FOR CORRESPONDENCE: trademarkgroup@oliff.com
      SECONDARY EMAIL ADDRESS(ES) (COURTESY COPIES): NOT PROVIDED


Requirement for Email and Electronic Filing: I understand that a valid email address must be maintained by the owner/holder and the owner's/holder's attorney, if appointed, and that all official trademark correspondence must be submitted via the Trademark Electronic Application System (TEAS).





A fee payment in the amount of $125 will be submitted with the form, representing payment for 1 class.


Declaration

STATEMENTS: The signatory believes that: the applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all the goods/services under Section 1(b) in the notice of allowance or as subsequently modified, or, if applicable, the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with all the goods/services/collective membership organization under Section 1(b) in the notice of allowance or as subsequently modified; and that to the best of the signatory's knowledge and belief, no other persons, except, if applicable, members and concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

DECLARATION: The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. §1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any resulting registration, declares that all statements made of his/her own knowledge are true and that all statements made on information and belief are believed to be true.


Signature: /Holly M. Ford Lewis/      Date Signed: 09/20/2021
Signatory's Name: Holly M. Ford Lewis
Signatory's Position: Attorney of Record
Signatory's Phone: 703-836-6400
Signature method: Signed directly within the form

PAYMENT: 87593839
PAYMENT DATE: 09/20/2021

Serial Number: 87593839
Internet Transmission Date: Mon Sep 20 11:07:59 ET 2021
TEAS Stamp: USPTO/ESU-XX.XXX.XXX.XXX-202109201107590
53146-87593839-781aa829ff61dae2413c08ee4
3cbbe4a696e70d7305d173c1c8a3fea1913536ab
-DA-07571659-20210920110507071695