To: | F SQUARED ENGINEERING CORP. (uspto@tm4smallbiz.com) |
Subject: | U.S. TRADEMARK APPLICATION NO. 87271388 - F2 - N/A |
Sent: | 3/25/2017 11:52:36 AM |
Sent As: | ECOM122@USPTO.GOV |
Attachments: | Attachment - 1 Attachment - 2 |
UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
U.S. APPLICATION SERIAL NO. 87271388
MARK: F2
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
APPLICANT: F SQUARED ENGINEERING CORP.
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW. A RESPONSE TRANSMITTED THROUGH THE TRADEMARK ELECTRONIC APPLICATION SYSTEM (TEAS) MUST BE RECEIVED BEFORE MIDNIGHT EASTERN TIME OF THE LAST DAY OF THE RESPONSE PERIOD.
ISSUE/MAILING DATE: 3/25/2017
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION
Trademark Act Section 2(d) bars registration of an applied-for mark that so resembles a registered mark that it is likely a potential consumer would be confused, mistaken, or deceived as to the source of the goods of the applicant and registrant. See 15 U.S.C. §1052(d). The overriding concern is not only to prevent buyer confusion as to the source of the goods, but to protect the registrant from adverse commercial impact due to use of a similar mark by a newcomer. See In re Shell Oil Co., 992 F.2d 1204, 1208, 26 USPQ2d 1687, 1690 (Fed. Cir. 1993). Therefore, any doubt regarding a likelihood of confusion determination is resolved in favor of the registrant. TMEP §1207.01(d)(i); see Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1265, 62 USPQ2d 1001, 1003 (Fed. Cir. 2002); In re Hyper Shoppes (Ohio), Inc., 837 F.2d 463, 464-65, 6 USPQ2d 1025, 1026 (Fed. Cir. 1988).
A determination of likelihood of confusion under Section 2(d) is made on a case-by-case basis and the factors set forth in In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973) aid in this determination. Citigroup Inc. v. Capital City Bank Grp., Inc., 637 F.3d 1344, 1349, 98 USPQ2d 1253, 1256 (Fed. Cir. 2011) (citing On-Line Careline, Inc. v. Am. Online, Inc., 229 F.3d 1080, 1085, 56 USPQ2d 1471, 1474 (Fed. Cir. 2000)). Not all the du Pont factors, however, are necessarily relevant or of equal weight, and any one of the factors may control in a given case, depending upon the evidence of record. Citigroup Inc. v. Capital City Bank Grp., Inc., 637 F.3d at 1355, 98 USPQ2d at 1260; In re Majestic Distilling Co., 315 F.3d 1311, 1315, 65 USPQ2d 1201, 1204 (Fed. Cir. 2003); see In re E. I. du Pont de Nemours & Co., 476 F.2d at 1361-62, 177 USPQ at 567.
In this case, the following factors are the most relevant: similarity of the marks and similarity and nature of the goods. See In re Viterra Inc., 671 F.3d 1358, 1361-62, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Dakin’s Miniatures Inc., 59 USPQ2d 1593, 1595-96 (TTAB 1999); TMEP §§1207.01 et seq.
Similarity of Marks
Applicant’s mark is “F2” in stylized form with a design element. Registrant’s mark is “F2” in standard characters.
Although applicant’s mark contains a design element, the wording of the mark, “F2”, is the dominant portion. For a composite mark containing both words and a design, the word portion may be more likely to indicate the origin of the goods and/or services because it is that portion of the mark that consumers use when referring to or requesting the goods and/or services. Bond v. Taylor, 119 USPQ2d 1049, 1055 (TTAB 2016) (citing In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908, 1911 (Fed. Cir. 2012)); TMEP §1207.01(c)(ii). Thus, although such marks must be compared in their entireties, the word portion is often considered the dominant feature and is accorded greater weight in determining whether marks are confusingly similar. In re Viterra Inc., 671 F.3d at 1366-67, 101 USPQ2d at 1911 (citing Giant Food, Inc. v. Nation’s Foodservice, Inc., 710 F.2d 1565, 1570-71, 218 USPQ2d 390, 395 (Fed. Cir. 1983)). In the present case, the wording of applicant’s mark is dominant and accorded greater weight because the design element consists solely of a square on a circle background, which is minimal and does not alter the commercial impression created by the wording of the mark. Consumers will refer to applicant’s certification mark by the wording, not by any of the design elements.
Turning to the wording of the marks, the word portions of applicant’s mark and registrant’s mark are identical in appearance, sound, and meaning, “and have the potential to be used . . . in exactly the same manner.” In re i.am.symbolic, llc, 116 USPQ2d 1406, 1411 (TTAB 2015). Additionally, because the wording is identical, these marks are likely to engender the same connotation and overall commercial impression when considered in connection with applicant’s and registrant’s respective goods. In re i.am.symbolic, llc, 116 USPQ2d at 1411.
For the above reasons, applicant’s mark is confusingly similar to registrant’s mark.
Relatedness of Goods
The applied-for mark is intended to indicate that the following goods have been certified by applicant: electrical products, parts, and components. Registrant’s goods are “Electronic and digital locating data receivers, remote displays in the nature of flat panel displays, [ batteries and battery chargers, ] and software, all for use in locating and monitoring subsurface transmitters, receivers, drillheads, drillpipes, reamers, augers, boring tools, and buried utility lines, cables and pipes, and for collecting and displaying data relating to same”
Absent restrictions in an application and/or registration, the identified goods are “presumed to travel in the same channels of trade to the same class of purchasers.” In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)). Additionally, unrestricted and broad identifications are presumed to encompass all goods of the type described. See In re Jump Designs, LLC, 80 USPQ2d 1370, 1374 (TTAB 2006) (citing In re Elbaum, 211 USPQ 639, 640 (TTAB 1981)); In re Linkvest S.A., 24 USPQ2d 1716, 1716 (TTAB 1992).
In this case, the identification set forth in the application has no restrictions as to nature, type, channels of trade, or classes of purchasers of the electrical products, parts, and components applicant certifies. Registrant’s identification has no restrictions as to channels of trade or classes of purchasers of its electrical goods, “Electronic and digital locating data receivers, remote displays in the nature of flat panel displays, and battery chargers.” Therefore, it is presumed that registrant’s goods and the goods certified by applicant travel in all normal channels of trade, and are available to the same class of purchasers. Further, the application uses broad wording to describe the goods certified and this wording is presumed to encompass all goods of the type described, including those in registrant’s more narrow identification of specific electrical goods. Accordingly, the goods certified by applicant and registrant’s goods are related for likelihood of confusion purposes.
In summary, applicant's and registrant's marks are confusingly similar, and the goods certified by applicant and registrant’s goods are highly related. Therefore, consumers are likely to be confused and mistakenly believe that the registrant’s goods and the goods certified by applicant originate from a common source. Accordingly, registration must be refused under Section 2(d) of the Trademark Act.
COPY OF CERTIFICATION STANDARDS WILL BE REQUIRED—ADVISORY
Further, the standards are not required to be created by the applicant, but may be established by another party, such as a government agency or private research organization. Id.
RESPONSE GUIDELINES
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $125 per class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
/Melissa S. Winter/
Examining Attorney
Law Office 122
571-272-7913
Melissa.Winter@uspto.gov
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.