To: | Oliver Jones, Inc. (tmdocket@culhanemeadows.com) |
Subject: | U.S. TRADEMARK APPLICATION NO. 87122133 - VENTURE - N/A |
Sent: | 11/10/2016 1:36:32 PM |
Sent As: | ECOM105@USPTO.GOV |
Attachments: | Attachment - 1 Attachment - 2 Attachment - 3 |
UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
U.S. APPLICATION SERIAL NO. 87122133
MARK: VENTURE
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
APPLICANT: Oliver Jones, Inc.
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.
ISSUE/MAILING DATE: 11/10/2016
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issues below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION
The applied-for mark is VENTURE for “Metal Locks; Plastic Locks; Combination Metal and Plastic Locks; Electronic Locks.”
The registered mark is LIFEVENTURE for, in relevant part, “Locks and padlocks; combination locks and padlocks; all being metallic,” “Electric locks and padlocks fitted with an alarm; electric combination locks and padlocks fitted with an alarm; personal security alarms,” and “locks and padlocks; combination locks and padlocks; all being non-metallic.”
In this case, the following factors are the most relevant: similarity of the marks, similarity and nature of the goods and/or services, and similarity of the trade channels of the goods and/or services. See In re Viterra Inc., 671 F.3d 1358, 1361-62, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012); In re Dakin’s Miniatures Inc., 59 USPQ2d 1593, 1595-96 (TTAB 1999); TMEP §§1207.01 et seq.
Similarity of the Marks
Applicant’s applied-for mark is VENTURE and registrant’s mark is LIFEVENTURE. The marks are highly similar because they contain the identical wording “VENTURE,” which is applicant’s entire mark. Incorporating the entirety of one mark within another does not obviate the similarity between the compared marks, as in the present case, nor does it overcome a likelihood of confusion under Section 2(d). See Wella Corp. v. Cal. Concept Corp., 558 F.2d 1019, 1022, 194 USPQ 419, 422 (C.C.P.A. 1977) (finding CALIFORNIA CONCEPT and surfer design and CONCEPT confusingly similar); Coca-Cola Bottling Co. v. Jos. E. Seagram & Sons, Inc., 526 F.2d 556, 557, 188 USPQ 105, 106 (C.C.P.A. 1975) (finding BENGAL LANCER and design and BENGAL confusingly similar); In re Integrated Embedded, ___ USPQ2d ___, ___, Ser. No. 86140341, 2016 TTAB LEXIS 470, at *29-30 (Sept. 27, 2016) (finding BARR GROUP and BARR confusingly similar); In re Mr. Recipe, LLC, 118 USPQ2d 1084, 1090 (TTAB 2016) (finding JAWS DEVOUR YOUR HUNGER and JAWS confusingly similar); TMEP §1207.01(b)(iii). In the present case, the marks are identical in part.
The additional wording “LIFE” in registrant’s mark does not obviate a likelihood of confusion. Marks may be confusingly similar in appearance where similar terms or phrases or similar parts of terms or phrases appear in the compared marks and create a similar overall commercial impression. See Crocker Nat’l Bank v. Canadian Imperial Bank of Commerce, 228 USPQ 689, 690-91 (TTAB 1986), aff’d sub nom. Canadian Imperial Bank of Commerce v. Wells Fargo Bank, Nat’l Ass’n, 811 F.2d 1490, 1495, 1 USPQ2d 1813, 1817 (Fed. Cir. 1987) (finding COMMCASH and COMMUNICASH confusingly similar); In re Corning Glass Works, 229 USPQ 65, 66 (TTAB 1985) (finding CONFIRM and CONFIRMCELLS confusingly similar); In re Pellerin Milnor Corp., 221 USPQ 558, 560 (TTAB 1983) (finding MILTRON and MILLTRONICS confusingly similar); TMEP §1207.01(b)(ii)-(iii).
Because the marks contain the identical wording “VENTURE,” which is applicant’s only element, the marks are highly similar.
Relatedness of the Goods
Registrant’s “Locks and padlocks; combination locks and padlocks; all being metallic,” “Electric locks and padlocks fitted with an alarm; electric combination locks and padlocks fitted with an alarm; personal security alarms,” and “locks and padlocks; combination locks and padlocks; all being non-metallic” encompass applicant’s “Metal Locks; Plastic Locks; Combination Metal and Plastic Locks; Electronic Locks.” With respect to applicant’s and registrant’s goods and/or services, the question of likelihood of confusion is determined based on the description of the goods and/or services stated in the application and registration at issue, not on extrinsic evidence of actual use. See Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1323, 110 USPQ2d 1157, 1162 (Fed. Cir. 2014) (quoting Octocom Sys. Inc. v. Hous. Computers Servs. Inc., 918 F.2d 937, 942, 16 USPQ2d 1783, 1787 (Fed. Cir. 1990)).
Absent restrictions in an application and/or registration, the identified goods and/or services are “presumed to travel in the same channels of trade to the same class of purchasers.” In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)). Additionally, unrestricted and broad identifications are presumed to encompass all goods and/or services of the type described. See In re Jump Designs, LLC, 80 USPQ2d 1370, 1374 (TTAB 2006) (citing In re Elbaum, 211 USPQ 639, 640 (TTAB 1981)); In re Linkvest S.A., 24 USPQ2d 1716, 1716 (TTAB 1992).
In this case, the identification set forth in the application and registration(s) has no restrictions as to nature, type, channels of trade, or classes of purchasers. Therefore, it is presumed that these goods and/or services travel in all normal channels of trade, and are available to the same class of purchasers. Further, the registration uses broad wording to describe the goods and/or services and this wording is presumed to encompass all goods and/or services of the type described, including those in applicant’s more narrow identification.
The respective goods and/or services need only be “related in some manner and/or if the circumstances surrounding their marketing [be] such that they could give rise to the mistaken belief that [the goods and/or services] emanate from the same source.” Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369, 101 USPQ2d 1713, 1722 (Fed. Cir. 2012) (quoting 7-Eleven Inc. v. Wechsler, 83 USPQ2d 1715, 1724 (TTAB 2007)); TMEP §1207.01(a)(i).
Accordingly, registration is refused under Section 2(d) for a likelihood of confusion.
Although applicant’s mark has been refused registration, applicant may respond to the refusals by submitting evidence and arguments in support of registration.
If applicant responds to the refusal, applicant must also respond to the requirements set forth below.
CLASSIFICATION OF GOODS AMENDMENT REQUIRED
Applicant has classified the following goods in International Class 009: “Metal Locks; Plastic Locks; Combination Metal and Plastic Locks.” However, the proper classification for each item is as follows: “metal locks; combination locks of metal” in Class 006 and “plastic locks; combination locks of plastic” in Class 020.
Additionally, applicant has provided the application fee for only 1 international class. Thus, not all international classes in the application are covered by the application fee. Because of this disparity, applicant must clarify the number of classes for which registration is sought. See 37 C.F.R. §§2.32(d), 2.86.
Applicant may respond by (1) adding one or more international class(es) to the application, and reclassifying the above goods and/or services accordingly; or (2) deleting from the application the goods and/or services for all but the number of international class(es) for which the application fee was submitted. See 37 C.F.R. §§2.86(a), 6.1; TMEP §§1403.02 et seq. If applicant adds one or more international classes to the application, applicant must comply with the multiple-class application requirements specified in this Office action.
Applicant may adopt the following identification, if accurate:
International Class 006: Metal locks; combination locks of metal
International Class 009: Electronic locks
International Class 020: Plastic locks; combination locks of plastic
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.
MULTIPLE-CLASS APPLICATION REQUIREMENTS
(1) List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class.
(2) Submit a filing fee for each international class not covered by the fee already paid (view the USPTO’s current fee schedule at http://www.gov.uspto.report/trademarks/tm_fee_info.jsp). The application identifies goods that are classified in at least 3 classes; however, applicant submitted a fee sufficient for only 1 class. Applicant must either submit the filing fees for the classes not covered by the submitted fees or restrict the application to the number of classes covered by the fees already paid.
See 15 U.S.C. §§1051(b), 1112, 1126(e); 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(2)-(3), 2.86(a); TMEP §§1403.01, 1403.02(c).
For an overview of the requirements for a Section 1(b) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form, please go to http://www.gov.uspto.report/trademarks/law/multiclass.jsp.
ASSISTANCE
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $50 per international class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.
/Kristin Williams/
Kristin Williams
Examining Attorney
Law Office 105
(571) 270-1942
kristin.williams@uspto.gov
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.