UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION

 

 

 

OFFICE ACTION

 

STRICT DEADLINE TO RESPOND TO THIS LETTER

TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.

 

ISSUE/MAILING DATE: 11/1/2016

 

The referenced application has been reviewed by the assigned trademark examining attorney.  Applicant must respond timely and completely to the issue(s) below.  15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

 

SECTION 2(d) REFUSAL – LIKELIHOOD OF CONFUSION

Registration of the applied-for mark ADVANTAGE (with design) is refused because of a likelihood of confusion with the mark ADVANTAGE in U.S. Registration No. 4156942.  Trademark Act Section 2(d), 15 U.S.C. §1052(d); see TMEP §§1207.01 et seq.  See the attached registration.

 

In any likelihood of confusion determination, two key considerations are similarity of the marks and similarity or relatedness of the goods and/or services.  In re Fat Boys Water Sports LLC, 118 USPQ2d 1511, 1516 (TTAB 2016) (citing Federated Foods, Inc. v. Fort Howard Paper Co., 544 F.2d 1098, 1103, 192 USPQ 24, 29 (C.C.P.A. 1976)); see TMEP §1207.01.  That is, the marks are compared in their entireties for similarities in appearance, sound, connotation, and commercial impression.  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting In re E. I. du Pont de Nemours & Co., 476 F.2d 1357, 1361, 177 USPQ 563, 567 (C.C.P.A. 1973)); TMEP §1207.01(b)-(b)(v).  Additionally, the goods and/or services are compared to determine whether they are similar or commercially related or travel in the same trade channels.  See Coach Servs., Inc. v. Triumph Learning LLC, 668 F.3d 1356, 1369-71, 101 USPQ2d 1713, 1722-23 (Fed. Cir. 2012); Herbko Int’l, Inc. v. Kappa Books, Inc., 308 F.3d 1156, 1165, 64 USPQ2d 1375, 1381 (Fed. Cir. 2002); TMEP §1207.01, (a)(vi).

 

Similarity of the Marks

In the present case, the applicant’s mark is ADVANTAGE, and the registrant’s mark is ADVANTAGE.  Accordingly, the applicant has merely taken the registrant’s mark and added the a design element.   Adding a term to a registered mark generally does not obviate the similarity between the compared marks, as in the present case, nor does it overcome a likelihood of confusion under Section 2(d).  See Coca-Cola Bottling Co. v. Jos. E. Seagram & Sons, Inc., 526 F.2d 556, 557, 188 USPQ 105, 106 (C.C.P.A. 1975).  It is noted that the applicant has a design element.  Please note, the design element does not obviate the finding of likelihood of confusion.  Although marks must be compared in their entireties, the word portion generally may be considered the dominant and most significant feature of a mark because consumers will request the goods and/or services using the wording.  See Bond v. Taylor, 119 USPQ2d 1049, 1055 (TTAB 2016) (citing In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908, 1911 (Fed. Cir. 2012)); TMEP §1207.01(c)(ii).  For this reason, greater weight is often given to the word portion of marks when determining whether marks are confusingly similar.  In re Viterra Inc., 671 F.3d at 1366-67, 101 USPQ2d at 1911 (citing Giant Food, Inc. v. Nation’s Foodservice, Inc., 710 F.2d 1565, 1570-71, 218 USPQ2d 390, 395 (Fed. Cir. 1983)).

 

Accordingly, in the present case, the marks are identical in their dominant features.

 

Similarity of the Goods/Services

The registration covers:

 

Handrims and pushrims for wheelchairs; Motorized, electric-powered, self-propelled, self-balancing, wheeled personal mobility, transportation device; Multiple-pocketed carrier for personal items specially adapted for attachment to wheelchairs; Viscous gel polymer sold as a component of finished custom cushioned wheel chair seats and back cushions; Wheel chairs; Wheelchair cushions; Wheelchair pads; Wheelchairs. 

 

The applicant seeks registration in relation to:

 

Two-wheeled motor vehicles and their parts and fittings; non-electric prime movers for land vehicles (not including "their parts"); mechanical elements for land vehicles; shafts, axles or spindles for two-wheeled motor vehicles; shafts, axle or spindle bearings for two-wheeled motor vehicles; shaft couplings or connectors for two-wheeled motor vehicles; bearings for two-wheeled motor vehicles; power transmissions and gearing for machines for two-wheeled motor vehicles; shock absorbers for two-wheeled motor vehicles; springs for two-wheeled motor vehicles; brakes for two-wheeled motor vehicles.

 

The goods of the applicant and registrant are highly related.  With respect to applicant’s and registrant’s goods, the question of likelihood of confusion is determined based on the description of the goods stated in the application and registration at issue, not on extrinsic evidence of actual use.  See Stone Lion Capital Partners, LP v. Lion Capital LLP, 746 F.3d 1317, 1323, 110 USPQ2d 1157, 1162 (Fed. Cir. 2014) (quoting Octocom Sys. Inc. v. Hous. Computers Servs. Inc., 918 F.2d 937, 942, 16 USPQ2d 1783, 1787 (Fed. Cir. 1990)). 

 

Absent restrictions in an application and/or registration, the identified goods are “presumed to travel in the same channels of trade to the same class of purchasers.”  In re Viterra Inc., 671 F.3d 1358, 1362, 101 USPQ2d 1905, 1908 (Fed. Cir. 2012) (quoting Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1268, 62 USPQ2d 1001, 1005 (Fed. Cir. 2002)).  Additionally, unrestricted and broad identifications are presumed to encompass all goods of the type described.  See In re Jump Designs, LLC, 80 USPQ2d 1370, 1374 (TTAB 2006) (citing In re Elbaum, 211 USPQ 639, 640 (TTAB 1981)); In re Linkvest S.A., 24 USPQ2d 1716, 1716 (TTAB 1992). 

 

In this case, the identification set forth in the application and registration has no restrictions as to nature, type, channels of trade, or classes of purchasers.  Therefore, it is presumed that these goods travel in all normal channels of trade, and are available to the same class of purchasers.  Further, the application uses broad wording to describe the goods and this wording is presumed to encompass all goods of the type described, including those in registrant’s more narrow identification.  For instance, the registration covers a “Motorized, electric-powered, self-propelled, self-balancing, wheeled personal mobility, transportation device.”  The application seeks to register the same literal mark ADVANTAGE for “Two-wheeled motor vehicles and their parts and fittings.” 

 

The overriding concern is not only to prevent buyer confusion as to the source of the goods, but to protect the registrant from adverse commercial impact due to use of a similar mark by a newcomer.  See In re Shell Oil Co., 992 F.2d 1204, 1208, 26 USPQ2d 1687, 1690 (Fed. Cir. 1993).  Therefore, any doubt regarding a likelihood of confusion determination is resolved in favor of the registrant.  TMEP §1207.01(d)(i); see Hewlett-Packard Co. v. Packard Press, Inc., 281 F.3d 1261, 1265, 62 USPQ2d 1001, 1003 (Fed. Cir. 2002); In re Hyper Shoppes (Ohio), Inc., 837 F.2d 463, 464-65, 6 USPQ2d 1025, 1026 (Fed. Cir. 1988).

 

If the applicant chooses to respond, the following informalities must be addressed.

 

DESCRIPTION OF THE MARK/COLOR WHITE IN MARK

The drawing shows the applied-for mark in various colors, including a white background.  Although the application includes a claim of color and a mark description referencing color, the white background is not included in either the color claim or description.  The color claim and mark description must be complete and reference all the colors in the mark.  See 37 C.F.R. §§2.37, 2.52(b)(1); TMEP §§807.07(a) et seq.  Therefore, applicant must clarify whether the white background is being claimed as color or whether it is intended to indicate background. TMEP §807.07(d).

To clarify whether the color white is being claimed as color, applicant must satisfy one of the following:

(1)       If white is being claimed as a color in the mark, applicant must amend the mark description to identify the literal and design elements and specify where the color white appears in these elements; or

(2)       If the white background is not being claimed as a color in the mark, applicant must provide a statement that the color white represents specify e.g., background, outlining, shading and/or transparent areas and are not part of the mark.

Id. 

IDENTIFICATION OF GOODS

Some of the wording in the identification of goods is indefinite and must be clarified.  See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.  Furthermore, the identification of goods and/or services contains parentheses.  Generally, applicants should not use parentheses and brackets in identifications in their applications so as to avoid confusion with the USPTO’s practice of using parentheses and brackets in registrations to indicate goods and/or services that have been deleted from registrations or in an affidavit of incontestability to indicate goods and/or services not claimed.  See TMEP §1402.12.  The only exception is that parenthetical information is permitted in identifications in an application if it serves to explain or translate the matter immediately preceding the parenthetical phrase in such a way that it does not affect the clarity of the identification, e.g., “sash bands for kimono (obi).”  Id.

 

Therefore, applicant must remove the parenthesis from the identification and incorporate any parenthetical or bracketed information into the description of the goods and/or services.

 

Accordingly, the applicant may substitute the following wording, if accurate.  Please note, the suggested amended wording and/or information for creating an acceptable identification appears in bold font.

 

Two-wheeled motorized vehicles and replacement parts therefor; non-electric prime movers for land vehicles, namely, diesel and gasoline engines for land vehicles; mechanical elements for land vehicles, namely, drive shafts, axles and spindles for two-wheeled motor vehicles; axle spindle bearings for two-wheeled land motor vehicles; shaft couplings for two-wheeled motor vehicles; wheel bearings for two-wheeled motor vehicles; vehicle power train mechanism comprised of clutch, transmission, drive shaft, and differential; vehicle power train mechanism comprised of clutch, transmission, drive shaft, and differential for two-wheeled motor vehicles; shock absorbers for two-wheeled motor vehicles; suspension springs for two-wheeled motor vehicles; brakes for two-wheeled motor vehicles  (International Class 12)

           

The applicant should note that the above suggested identification of goods is acceptable as written.  Any alteration may render it unacceptable.  Accordingly, if the applicant wishes to amend the goods differently, or if the applicant has any questions or needs assistance in responding to this Office action, please telephone the assigned examining attorney. 

 

Please further note that, while an application may be amended to clarify or limit the identification, additions to the identification are not permitted.  37 C.F.R. Section 2.71(a); TMEP § 1402.06.  Therefore, the applicant may not amend to include any goods that are not within the scope of goods set forth in the original identification.

 

DUAL BASIS

The application specifies both an intent to use basis under Trademark Act Section 1(b) and a claim of priority under Section 44(d) based on a foreign application.  See 15 U.S.C. §§1051(b), 1126(d); 37 C.F.R. §2.34(a)(2), (a)(4).  However, no copy of a foreign registration has been provided even though the application indicates applicant’s intent to rely on Section 44(e) as an additional basis for registration.  See 15 U.S.C. §1126(e).

 

An application with a Section 44(e) basis must include a true copy, photocopy, certification, or certified copy of a foreign registration from an applicant’s country of origin.  15 U.S.C. §1126(e); 37 C.F.R. §2.34(a)(3)(ii); TMEP §§1004, 1004.01, 1016.  In addition, an applicant’s country of origin must be a party to a convention or treaty relating to trademarks to which the United States is also a party, or must extend reciprocal registration rights to nationals of the United States by law.  15 U.S.C. §1126(b); TMEP §§1002.01, 1004.

 

Therefore, applicant must provide a copy of the foreign registration from applicant’s country of origin when it becomes available.  TMEP §1003.04(a).  A copy of a foreign registration must consist of a document issued to an applicant by, or certified by, the intellectual property office in applicant’s country of origin.  TMEP §1004.01.  If applicant’s country of origin does not issue registrations or Madrid Protocol certificates of extension of protection, applicant may submit a copy of the Madrid Protocol international registration that shows that protection of the international registration has been extended to applicant’s country of origin.  TMEP §1016.  In addition, applicant must also provide an English translation if the foreign registration is not written in English.  37 C.F.R. §2.34(a)(3)(ii); TMEP §1004.01(a)-(b).  The translation should be signed by the translator.  TMEP §1004.01(b).

 

If the foreign registration has not yet issued, or applicant requires additional time to procure a copy of the foreign registration (and English translation, as appropriate), applicant should so inform the trademark examining attorney and request that the U.S. application be suspended until a copy of the foreign registration is available.  TMEP §§716.02(b), 1003.04(b).

 

If applicant cannot satisfy the requirements of a Section 44(e) basis, applicant may request that the mark be approved for publication based solely on the Section 1(b) basis.  See 15 U.S.C. §§1051(b), 1126(e); 37 C.F.R. §2.35(b)(1); TMEP §§806.02(f), 806.04(b), 1003.04(b).  Although the mark may be approved for publication on the Section 1(b) basis, it will not register until an acceptable allegation of use has been filed.  See 15 U.S.C. §1051(c)-(d); 37 C.F.R. §§2.76, 2.88; TMEP §1103.  Please note that, if the U.S. application satisfied the requirements of Section 44(d) as of the U.S. application filing date, applicant may retain the priority filing date under Section 44(d) without perfecting the Section 44(e) basis, provided there is a continuing valid basis for registration.  See 37 C.F.R. §2.35(b)(3)-(4); TMEP §§806.02(f), 806.04(b). 

 

Alternatively, applicant has the option to amend the application to rely solely on the Section 44(e) basis and request deletion of the Section 1(b) basis.  See 37 C.F.R. §2.35(b)(1); TMEP §806.04.  The foreign registration alone may serve as the basis for obtaining a U.S. registration.  See 37 C.F.R. §2.34(a)(3); TMEP §806.01(d).

 

CLASSIFICATION

Some of the goods are classified incorrectly.  The applicant must classify the goods as specified above.  Proper classification of goods and services is a purely administrative matter within the sole discretion of the USPTO.  See In re Faucher Indus. Inc., 107 USPQ2d 1355, 1357 (TTAB 2013) (quoting In re Tee-Pak, Inc., 164 USPQ 88, 89 (TTAB 1969)).

 

 

 

 

 

 

RESPONSE TO OFFICE ACTION 

For this application to proceed further, applicant must explicitly address each refusal and/or requirement raised in this Office action.  If the action includes a refusal, applicant may provide arguments and/or evidence as to why the refusal should be withdrawn and the mark should register.  Applicant may also have other options for responding to a refusal and should consider such options carefully.  To respond to requirements and certain refusal response options, applicant should set forth in writing the required changes or statements.  For more information and general tips on responding to USPTO Office actions, response options, and how to file a response online, see “Responding to Office Actions” on the USPTO’s website.

 

If applicant does not respond to this Office action within six months of the issue/mailing date, or responds by expressly abandoning the application, the application process will end and the trademark will fail to register.  See 15 U.S.C. §1062(b); 37 C.F.R. §§2.65(a), 2.68(a); TMEP §§718.01, 718.02.  Additionally, the USPTO will not refund the application filing fee, which is a required processing fee.  See 37 C.F.R. §§2.6(a)(1)(i)-(iv), 2.209(a); TMEP §405.04.

 

Where the application has been abandoned for failure to respond to an Office action, applicant’s only option would be to file a timely petition to revive the application, which, if granted, would allow the application to return to active status.  See 37 C.F.R. §2.66; TMEP §1714.  There is a $100 fee for such petitions.  See 37 C.F.R. §§2.6, 2.66(b)(1).

 

The response should address each refusal and/or requirement raised in the Office action.  If a refusal has issued, applicant can argue against the refusal; i.e., applicant can submit arguments and evidence as to why the refusal should be withdrawn and the mark should register.  To respond to requirements, applicant should set forth in writing the required changes or statements and request that the Office enter them into the application record. 

 

The response must be personally signed or the electronic signature manually entered by applicant or someone with legal authority to bind applicant (i.e., a corporate officer of a corporate applicant, the equivalent of an officer for unincorporated organizations or limited liability company applicants, a general partner of a partnership applicant, each applicant for applications with multiple individual applicants).  TMEP §§605.02, 712.

 

QUESTIONS

If applicant has questions regarding this Office action, please telephone or e-mail the assigned trademark examining attorney.  All relevant e-mail communications will be placed in the official application record; however, an e-mail communication will not be accepted as a response to this Office action and will not extend the deadline for filing a proper response.  See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05.  Further, although the trademark examining attorney may provide additional explanation pertaining to the refusal(s) and/or requirement(s) in this Office action, the trademark examining attorney may not provide legal advice or statements about applicant’s rights.  See TMEP §§705.02, 709.06.

 

TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE:  Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application.  See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820.  TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $50 per international class of goods.  37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04.  However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone or e-mail without incurring this additional fee.   

 

 

 

/Geoffrey Fosdick/

Trademark Attorney

Law Office 111

U.S. Patent & Trademark Office

571 272 9161

geoffrey.fosdick@uspto.gov

 

 

TO RESPOND TO THIS LETTER:  Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.  Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application.  For technical assistance with online forms, e-mail TEAS@uspto.gov.  For questions about the Office action itself, please contact the assigned trademark examining attorney.  E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

 

All informal e-mail communications relevant to this application will be placed in the official application record.

 

WHO MUST SIGN THE RESPONSE:  It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants).  If an applicant is represented by an attorney, the attorney must sign the response. 

 

PERIODICALLY CHECK THE STATUS OF THE APPLICATION:  To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/.  Please keep a copy of the TSDR status screen.  If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199.  For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

 

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS:  Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

 

 

UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)

 

 

IMPORTANT NOTICE REGARDING YOUR

U.S. TRADEMARK APPLICATION

 

USPTO OFFICE ACTION (OFFICIAL LETTER) HAS ISSUED

ON 11/1/2016 FOR U.S. APPLICATION SERIAL NO. 87111631

 

Please follow the instructions below:

 

(1)  TO READ THE LETTER:  Click on this link or go to http://tsdr.uspto.gov,enter the U.S. application serial number, and click on “Documents.”

 

The Office action may not be immediately viewable, to allow for necessary system updates of the application, but will be available within 24 hours of this e-mail notification.

 

(2)  TIMELY RESPONSE IS REQUIRED:  Please carefully review the Office action to determine (1) how to respond, and (2) the applicable response time period.  Your response deadline will be calculated from 11/1/2016 (or sooner if specified in the Office action).  For information regarding response time periods, see http://www.gov.uspto.report/trademarks/process/status/responsetime.jsp.

 

Do NOT hit “Reply” to this e-mail notification, or otherwise e-mail your response because the USPTO does NOT accept e-mails as responses to Office actions.  Instead, the USPTO recommends that you respond online using the Trademark Electronic Application System (TEAS) response form located at http://www.gov.uspto.report/trademarks/teas/response_forms.jsp.

 

(3)  QUESTIONS:  For questions about the contents of the Office action itself, please contact the assigned trademark examining attorney.  For technical assistance in accessing or viewing the Office action in the Trademark Status and Document Retrieval (TSDR) system, please e-mail TSDR@uspto.gov.

 

WARNING

 

Failure to file the required response by the applicable response deadline will result in the ABANDONMENT of your application.  For more information regarding abandonment, see http://www.gov.uspto.report/trademarks/basics/abandon.jsp.

 

PRIVATE COMPANY SOLICITATIONS REGARDING YOUR APPLICATION:  Private companies not associated with the USPTO are using information provided in trademark applications to mail or e-mail trademark-related solicitations.  These companies often use names that closely resemble the USPTO and their solicitations may look like an official government document.  Many solicitations require that you pay “fees.” 

 

Please carefully review all correspondence you receive regarding this application to make sure that you are responding to an official document from the USPTO rather than a private company solicitation.  All official USPTO correspondence will be mailed only from the “United States Patent and Trademark Office” in Alexandria, VA; or sent by e-mail from the domain “@uspto.gov.”  For more information on how to handle private company solicitations, see http://www.gov.uspto.report/trademarks/solicitation_warnings.jsp.