Extension of Time to File SOU

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1581 (Rev 09/2005)

OMB No. 0651-0054 (Exp 12/31/2020)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1581 (Rev 09/2005)

OMB No. 0651-0054 (Exp 12/31/2020)

SOU Extension Request
(15 U.S.C. Section 1051(d))

To the Commissioner for Trademarks:

MARK: OP (stylized and/or with design)
SERIAL NUMBER: 87044638

The applicant, Tundra Restaurant Supply, Inc., having an address of
      3825 Walnut Street, Unit E
      Boulder, Colorado 80301
      United States
      XXXX (authorized)
requests a six-month extension of time to file the Statement of Use under 37 C.F.R. Section 2.89 in this application.    The Notice of Allowance mailing date was 07/11/2017.

For International Class 006:
Current identification: Metal goods, namely, adapters for use with hydraulic and pneumatic systems, brackets for general use, non-electric door closers, door handles, fittings in the nature of gas valves other than parts of machines, gaskets for convection oven doors, hinge covers, hinge kits comprised of hinge mechanisms and hinges, latches, nuts, plugs, rollers for doors and drawers, screws, metal expanding sleeves for affixing screws, springs, trunnion supports for mounting applications, washers, wing nuts, gasket kits comprised of metal gaskets for convection ovens

For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this specific class.


For International Class 007:
Current identification: Machinery parts, namely, ball catches, ball valves, bearing kits comprised of bearings and bearing housings, bearings, bell crank hooks for ovens, brush holder caps for use in rotating electric machinery, chain breakers, conveyor belt rollers, conveyor belt links, conveyor belts, drain tubes for water removal from machinery, fans for motors, hoses for steam cooking, hot oil cooking and hot water cooking equipment, ignition modules for cooking equipment, gear motors, motors, o-rings being machines parts for cooking and refrigeration equipment, back pressure control valves as parts of machines, pressure regulators, electric pumps, mechanical seals for pumps, pumps for appliances in the nature of refrigerators and freezers, purge valves, spark ignition modules in the nature of spark plug ignition wires, steam traps for cooking equipment, tank gaskets for internal combustion engines

For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this specific class.


For International Class 009:
Current identification: Electrical and scientific apparatus, namely, anodes, capacitors, circuit breakers, electrical connectors, circuit control boards for temperature and/or time control, control valves for regulating flow of gases and liquids, electrical controls for defrost of refrigeration equipment, dial knobs being component parts of timing dials, automatic valves for drains, electric buzzers, electronic touch sensitive switches, electric thermal cutouts functioning as a safety device for monitoring oven temperature, flame sensors for use with cooking equipment, electric switches for controlling flames for use in cooking equipment, float switches for warewashing and cooking equipment, electrical fuse holders, electrical fuses, glass liquid level gauge tubes, electrical resistance heating wires, computer interface boards, electricity limiting switches, liquid level controls in the nature of flow switches for controlling the flow of liquids, magnetrons for use in generating alternating currents at microwave frequencies, magnets, electric contacts for mercury, electrodes for ovens, electrical pin connectors, luminous pointer knobs, potentiometers, proximity switches, push switches for cooking equipment, electric relays, electric relay contractors, pressure relief valves for warewashing and cooking equipment, electric rocker switches for switching off motors, thermally activated manually resettable fire safety valves, sensors for detecting temperature, solenoid valves, sound devices, namely, for commercial cooking equipment alerts, spark sensors for commercial cooking equipment, electrical switch assemblies comprised of switch, hardware and mounting plates, electrical switches, temperature controllers for cooking, refrigeration, and warewashing equipment, temperature probes, electrical terminal blocks, thermal sensors for cooking, refrigeration, and warewashing equipment, thermistors kits comprised of thermistor, wire, and shrink tubing, thermocouples, thermopiles, thermostat dials, thermostats, timer switches, electric toggle switches, transformers, thermionic tube adapters, water level probes, water level sensors, electrical probes and controllers for measuring and controlling ice thickness for ice machines, electronic valves for controlling gas flow

For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this specific class.


For International Class 011:
Current identification: Environmental control apparatus, namely, air vents for gas appliances, replacement components for air conditioners, namely, blower motor kits comprised of motor, blower wheel and hardware, blower wheels as component parts of air conditioning systems, filters for electric cookware in the nature of broilers, burner heads for stovetops, burner valves being parts of stovetops, ceramic burners being parts of stovetops, condensate cooling evaporators, electric fans with evaporative cooling devices, electronic defrost timers, diodes, ventilating exhaust fans, ventilating exhaust fan filters, ventilating exhaust fan guards being component parts of ventilating exhaust fans, gas pilot burners, halogen light bulbs, oven gas ignitors, kettle faucets, lamp bulbs, fixtures for incandescent light bulbs, electric lighting fixtures, oven gas burners, electric radiant heaters, water inlet valves and water valves in the nature of metered valves for regulating water supply; heating elements

For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this specific class.


For International Class 017:
Current identification: Electrical ceramic insulators

For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this specific class.


For International Class 021:
Current identification: Drain and dripping pans

For a trademark/service mark: The applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all of the goods/services listed in the Notice of Allowance or as subsequently modified for this specific class; for a collective/certification mark: the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with the goods/services/collective membership organization listed in the Notice of Allowance, or as subsequently modified for this specific class.


This is the first extension request.



A fee payment in the amount of $750 will be submitted with the form, representing payment for 6 classes.


Declaration

STATEMENTS: The signatory believes that: the applicant has a continued bona fide intention, and is entitled, to use the mark in commerce on or in connection with all the goods/services under Section 1(b) in the notice of allowance or as subsequently modified, or, if applicable, the applicant has a continued bona fide intention, and is entitled, to exercise legitimate control over the use of the mark in commerce on or in connection with all the goods/services/collective membership organization under Section 1(b) in the notice of allowance or as subsequently modified; and that to the best of the signatory's knowledge and belief, no other persons, except, if applicable, members and concurrent users, have the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services/collective membership organization of such other persons, to cause confusion or mistake, or to deceive.

DECLARATION: The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. §1001, and that such willful false statements and the like may jeopardize the validity of the application or submission or any resulting registration, declares that all statements made of his/her own knowledge are true and that all statements made on information and belief are believed to be true.


Signature: /David S. Kerr/      Date Signed: 01/10/2018
Signatory's Name: David S. Kerr
Signatory's Position: Attorney of record, Colorado bar member

RAM Sale Number: 87044638
RAM Accounting Date: 01/11/2018

Serial Number: 87044638
Internet Transmission Date: Wed Jan 10 20:05:51 EST 2018
TEAS Stamp: USPTO/ESU-XX.XXX.XXX.XX-2018011020055112
9876-87044638-510e22df198a682c7a773a4723
e92242093cd783ca877b274d37f2b539248b0265
e-CC-6499-20180110200123189745