Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 07/31/2017)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 07/31/2017)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 86916725 DAYTON (Stylized and/or with Design, see http://uspto.report/TM/86916725/mark.png) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 007 for Air compressors; motor driven, engine driven and hand-operated fluid pumps and parts of machines, motors and engines, and replacement parts therefor; fluid solutions injectors in the nature of components for fluid pumps; pump repair kits comprising mechanical seals and bearing assemblies, namely, bearings as parts of machines; electric motors for machines; fans for machine motors and engines; pumps for motors for machines; parts for electric motors for machines, namely, motor arbors, motor bases, motor brackets, motor brakes, motor brushes, motor clutches, motor conduit boxes, motor conversion kits, motor mounting rings, motor mountings, motor rails, motor rainshields, motor ring adapters, motor rings, motor shaft adapters, motor speed controllers, motor springs, motor switch boxes, motor switches, fan blades, fan dampers, fan guards, fan motors, fan mounting bolts, fan shutters, pump shaft seals; AC and DC generators; adjustable speed drives for industrial machinery; air-driven, battery operated, engine driven, and motor driven air and fluid pumps for industrial and commercial use; arbor press stands, namely, a stand for an arbor press which is a press for metalworking; arbor presses, namely, presses used for metalworking; band saw stands; band saws; electric belt sanders; blade welders in the nature of electric welding machines; blower nozzles for power operated blowers; electric chain hoists; commercial and industrial floor sweepers in the nature of push sweepers; DC gear motors in the nature of electric motors for machines; bits for power drills, namely, drill stop collars; drum mixers in the nature of mixing machines; dust collector hose for vacuum cleaners; dust collectors, namely, dust separators; electric AC gear motors; electric generators; electric starters for motors and engines; electric switches that are sold as integral component part of electric pumps; filters for use with vacuums; floor cranes; garbage disposals; linear actuator boots; linear actuators; machine parts, namely, bearings and bushings; compressed air machine parts, namely, air cylinder end mounts and air cylinders; machine parts, namely, belt tensioners, not for land vehicles; magnetic starters for motors and engines; milling machines; motor sheaves, namely, a metal wheel or disk with a grooved rim to accommodate drive belts for machines; motor/reducer combinations, namely, a combination of a speed reducer machine and an AC or DC motor for use in industrial and commercial applications; paint tank gaskets sold as an integral component of painting spray guns; paint tanks sold as an integral component of painting spray guns; power drill presses; power operated buffing wheels; power operated buffers; pump motor adapters, namely, metal or non-metal adapters used to connect a pump to an AC or DC motor; pump motor bases, namely, metal or non-metal bases where a pump is attached in order to keep the pump in place; pump pedestals, namely, mechanical machines that attach to fluid pumps in order to convert pumps to belt driven or direct drive pump; pump spray nozzles for use in power wash systems; pump trap baskets, namely, metal and non-metal baskets used to filter liquids prior to entering a pump; pump valves; rip fences, namely, saw fences for use on table saws; roller pump PTO couplings, namely, metal components used to connect pumps to tractor drive shafts; shaft couplings for machines; metal working machines, namely, shear and roll machines; sheet metal notchers, namely, metalworking machines used to put notches in sheet metal; spray nozzles for power sprayers, namely, machine parts being parts of power-operated sprayers; vacuum attachments accessories, namely, foam sleeves, hose, nozzles, rug shoes, squeegee shoes, and wands which attach to vacuum hoses; wands, namely, metal or non-metal tubes which attach to machine hoses in order to increase the reach of the hoses; winches; wire rope manipulators, namely, a hoist lifting device for raising heavy or cumbersome objects utilizing wire rope; drive belts for machinery; power-operated blowers; heat distributing fans in the nature of fans for machine engines; fan blades for fans for machine blades; fan shutters, dampers and louvers for use in HVAC systems; fan guards for ventilating fans; ventilators and ventilating systems for use in HVAC systems; fume exhausters, namely, power-operated blowers; hose and hose fittings for power-operated machinery; gas-operated cutting torches; electric and gas welding machines; electric motors for machines; electric fans; magnetic starters for motors and engines; electric generators; power-operated grinding wheels; abrasive sheets, discs and belts for power-operated grinders; power transmission and take-off apparatus for machines other than land vehicles, namely, speed reducers, flexible transmission shafts, and clutches; motor mounts, namely, bases and brackets for attaching an electric motor to a surface; power tool stands; pillow blocks and bearing blocks and shaft collars in the nature of bearing housings for machines; industrial and commercial vacuum cleaning and pick-up units and attachments therefor; steam cleaners; power saw blades; motorized and hand operated hoists; hydraulic cranes and jacks; polishing discs for power-operated polishers; transmission chains, other than for land vehicles; power-operated tools, namely, grinders; electric sanders; abrasive discs for power-operated sanders; gas-operated power generator; oil and fuel transfer pumps, namely, electric pumps; fuel filters; floor polishers
Original Filing Basis:
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.

Proposed:
Tracked Text Description: Air compressors; motor driven, engine driven and hand-operated fluid pumps and parts of machines, motors and engines, and replacement parts therefor; motor driven, engine driven and hand-operated fluid pumps, in the nature of pumps for machines, motors and engines, and replacement parts therefor; fluid solutions injectors in the nature of components for fluid pumps; pump repair kits comprising mechanical seals and bearing assemblies, namely, bearings as parts of machines; electric motors for machines; fans for machine motors and engines; pumps for motors for machines; parts for electric motors for machines, namely, motor arbors, motor bases, motor brackets, motor brakes, motor brushes, motor clutches, motor conduit boxes, motor conversion kits, motor mounting rings, motor mountings, motor rails, motor rainshields, motor ring adapters, motor rings, motor shaft adapters, motor speed controllers, motor springs, motor switch boxes, motor switches, fan blades, fan dampers, fan guards, fan motors, fan mounting bolts, fan shutters, pump shaft seals; AC and DC generators; adjustable speed drives for industrial machinery; air-driven, battery operated, engine driven, and motor driven air and fluid pumps for industrial and commercial use; arbor press stands, namely, a stand for an arbor press which is a press for metalworking; arbor presses, namely, presses used for metalworking; arbor presses, namely, mechanical and hydraulic presses used for metalworking; band saw stands; band saws; electric belt sanders; blade welders in the nature of electric welding machines; blower nozzles for power operated blowers; electric chain hoists; commercial and industrial floor sweepers in the nature of push sweepers; commercial and industrial floor sweepers in the nature of electric push sweepers; DC gear motors in the nature of electric motors for machines; bits for power drills, namely, drill stop collars; drum mixers in the nature of mixing machines; dust collector hose for vacuum cleaners; dust collectors, namely, dust separators; electric AC gear motors; electric generators; electric starters for motors and engines; electric switches that are sold as integral component part of electric pumps; filters for use with vacuums; floor cranes; garbage disposals; linear actuator boots; linear actuators; machine parts, namely, bearings and bushings; compressed air machine parts, namely, air cylinder end mounts and air cylinders; machine parts, namely, belt tensioners, not for land vehicles; magnetic starters for motors and engines; milling machines; motor sheaves, namely, a metal wheel or disk with a grooved rim to accommodate drive belts for machines; motor/reducer combinations, namely, a combination of a speed reducer machine and an AC or DC motor for use in industrial and commercial applications; paint tank gaskets sold as an integral component of painting spray guns; paint tanks sold as an integral component of painting spray guns; power drill presses; power operated buffing wheels; power operated buffers; pump motor adapters, namely, metal or non-metal adapters used to connect a pump to an AC or DC motor; pump motor bases, namely, metal or non-metal bases where a pump is attached in order to keep the pump in place; pump pedestals, namely, mechanical machines that attach to fluid pumps in order to convert pumps to belt driven or direct drive pump; pump spray nozzles for use in power wash systems; pump trap baskets, namely, metal and non-metal baskets used to filter liquids prior to entering a pump; pump valves; rip fences, namely, saw fences for use on table saws; roller pump PTO couplings, namely, metal components used to connect pumps to tractor drive shafts; shaft couplings for machines; metal working machines, namely, shear and roll machines; sheet metal notchers, namely, metalworking machines used to put notches in sheet metal; spray nozzles for power sprayers, namely, machine parts being parts of power-operated sprayers; vacuum attachments accessories, namely, foam sleeves, hose, nozzles, rug shoes, squeegee shoes, and wands which attach to vacuum hoses; wands, namely, metal or non-metal tubes which attach to machine hoses in order to increase the reach of the hoses; winches; wire rope manipulators, namely, a hoist lifting device for raising heavy or cumbersome objects utilizing wire rope; drive belts for machinery; power-operated blowers; heat distributing fans in the nature of fans for machine engines; fan blades for fans for machine blades; fan blades for fans for machine engines; fan shutters, dampers and louvers for use in HVAC systems; fume exhausters, namely, power-operated blowers; fan guards for ventilating fans; hose and hose fittings for power-operated machinery, namely, hoses for compressed air tools and vacuum cleaners; ventilators and ventilating systems for use in HVAC systems; gas-operated cutting torches; electric and gas welding machines; hose and hose fittings for power-operated machinery; electric motors for machines; electric fans; magnetic starters for motors and engines; electric generators; power-operated grinding wheels; abrasive sheets, discs and belts for power-operated grinders; power transmission and take-off apparatus for machines other than land vehicles, namely, speed reducers, flexible transmission shafts, and clutches; motor mounts, namely, bases and brackets for attaching an electric motor, for use by a machine other than land vehicles, to a surface; power tool stands; pillow blocks and bearing blocks and shaft collars in the nature of bearing housings for machines; motor mounts, namely, bases and brackets for attaching an electric motor to a surface; industrial and commercial vacuum cleaning and pick-up units and attachments therefor; steam cleaners; power saw blades; motorized and hand operated hoists; hydraulic cranes and jacks; polishing discs for power-operated polishers; transmission chains, other than for land vehicles; power-operated tools, namely, grinders; electric sanders; abrasive discs for power-operated sanders; gas-operated power generator; oil and fuel transfer pumps, namely, electric pumps; fuel filters; floor polishers; pressure control switches as parts of machines; temperature control switches as parts of machinesClass 007 for Air compressors; motor driven, engine driven and hand-operated fluid pumps, in the nature of pumps for machines, motors and engines, and replacement parts therefor; fluid solutions injectors in the nature of components for fluid pumps; pump repair kits comprising mechanical seals and bearing assemblies, namely, bearings as parts of machines; electric motors for machines; fans for machine motors and engines; pumps for motors for machines; parts for electric motors for machines, namely, motor arbors, motor bases, motor brackets, motor brakes, motor brushes, motor clutches, motor conduit boxes, motor conversion kits, motor mounting rings, motor mountings, motor rails, motor rainshields, motor ring adapters, motor rings, motor shaft adapters, motor speed controllers, motor springs, motor switch boxes, motor switches, fan blades, fan dampers, fan guards, fan motors, fan mounting bolts, fan shutters, pump shaft seals; AC and DC generators; adjustable speed drives for industrial machinery; air-driven, battery operated, engine driven, and motor driven air and fluid pumps for industrial and commercial use; arbor press stands, namely, a stand for an arbor press which is a press for metalworking; arbor presses, namely, mechanical and hydraulic presses used for metalworking; band saw stands; band saws; electric belt sanders; blade welders in the nature of electric welding machines; blower nozzles for power operated blowers; electric chain hoists; commercial and industrial floor sweepers in the nature of electric push sweepers; DC gear motors in the nature of electric motors for machines; bits for power drills, namely, drill stop collars; drum mixers in the nature of mixing machines; dust collector hose for vacuum cleaners; dust collectors, namely, dust separators; electric AC gear motors; electric generators; electric starters for motors and engines; electric switches that are sold as integral component part of electric pumps; filters for use with vacuums; floor cranes; garbage disposals; linear actuator boots; linear actuators; machine parts, namely, bearings and bushings; compressed air machine parts, namely, air cylinder end mounts and air cylinders; machine parts, namely, belt tensioners, not for land vehicles; magnetic starters for motors and engines; milling machines; motor sheaves, namely, a metal wheel or disk with a grooved rim to accommodate drive belts for machines; motor/reducer combinations, namely, a combination of a speed reducer machine and an AC or DC motor for use in industrial and commercial applications; paint tank gaskets sold as an integral component of painting spray guns; paint tanks sold as an integral component of painting spray guns; power drill presses; power operated buffing wheels; power operated buffers; pump motor adapters, namely, metal or non-metal adapters used to connect a pump to an AC or DC motor; pump motor bases, namely, metal or non-metal bases where a pump is attached in order to keep the pump in place; pump pedestals, namely, mechanical machines that attach to fluid pumps in order to convert pumps to belt driven or direct drive pump; pump spray nozzles for use in power wash systems; pump trap baskets, namely, metal and non-metal baskets used to filter liquids prior to entering a pump; pump valves; rip fences, namely, saw fences for use on table saws; roller pump PTO couplings, namely, metal components used to connect pumps to tractor drive shafts; shaft couplings for machines; metal working machines, namely, shear and roll machines; sheet metal notchers, namely, metalworking machines used to put notches in sheet metal; spray nozzles for power sprayers, namely, machine parts being parts of power-operated sprayers; vacuum attachments accessories, namely, foam sleeves, hose, nozzles, rug shoes, squeegee shoes, and wands which attach to vacuum hoses; wands, namely, metal or non-metal tubes which attach to machine hoses in order to increase the reach of the hoses; winches; wire rope manipulators, namely, a hoist lifting device for raising heavy or cumbersome objects utilizing wire rope; drive belts for machinery; power-operated blowers; heat distributing fans in the nature of fans for machine engines; fan blades for fans for machine engines; fume exhausters, namely, power-operated blowers; hose and hose fittings for power-operated machinery, namely, hoses for compressed air tools and vacuum cleaners; gas-operated cutting torches; electric and gas welding machines; electric motors for machines; electric fans; magnetic starters for motors and engines; electric generators; power-operated grinding wheels; abrasive sheets, discs and belts for power-operated grinders; power transmission and take-off apparatus for machines other than land vehicles, namely, speed reducers, flexible transmission shafts, and clutches; motor mounts, namely, bases and brackets for attaching an electric motor, for use by a machine other than land vehicles, to a surface; power tool stands; pillow blocks and bearing blocks and shaft collars in the nature of bearing housings for machines; industrial and commercial vacuum cleaning and pick-up units and attachments therefor; steam cleaners; power saw blades; motorized and hand operated hoists; hydraulic cranes and jacks; polishing discs for power-operated polishers; transmission chains, other than for land vehicles; power-operated tools, namely, grinders; electric sanders; abrasive discs for power-operated sanders; gas-operated power generator; oil and fuel transfer pumps, namely, electric pumps; fuel filters; floor polishers; pressure control switches as parts of machines; temperature control switches as parts of machines
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 009 for Batteries; electric relay modules; electric relays; electric switches; electronic speed controllers for fans; fan switches; fan switches, namely, electrical switches used in turning fans on and off; heat pump elements, namely, electrical resistance heating wires; motor conduit boxes, namely, electrical junction and fuse boxes; pool junction boxes; pump control boxes, namely, electrical conduit boxes and circuit breakers used to provide electric power to one or more submersible pumps; pump controls, namely, electrical components being electrical conduit boxes and circuit breakers used to start or stop pumps; electrical relay sockets; remote control electric switches; electromagnetic solenoid coils; electromagnetic solenoid valves; automated valves, namely, unloading check valves for outlets and inlets for air compressors and pumps; pump accessories, namely, electronic pump float switch component part consisting of pump float ball; electronic controls for fluid pumps; pressure switches as parts of machines; temperature switches as parts of machines; time switches; humidistats; float control switches; thermostats; timers; electronic control devices in the nature of temperature responsive fan controls; emergency warning lights; automatic gas valves; electric switches; transformers; capacitors; electric cord sets comprising cords, extension cords, and multi-conductor cords; electronic speed controls for power tools
Original Filing Basis:
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.

Proposed:
Tracked Text Description: Batteries; electric relay modules; electric relays; electric switches; electronic speed controllers for fans; fan switches; fan switches, namely, electrical switches used in turning fans on and off; heat pump elements, namely, electrical resistance heating wires; motor conduit boxes, namely, electrical junction and fuse boxes; pool junction boxes; pump control boxes, namely, electrical conduit boxes and circuit breakers used to provide electric power to one or more submersible pumps; pump controls, namely, electrical components being electrical conduit boxes and circuit breakers used to start or stop pumps; electrical relay sockets; remote control electric switches; electromagnetic solenoid coils; electromagnetic solenoid valves; automated valves, namely, unloading check valves for outlets and inlets for air compressors and pumps; pump accessories, namely, electronic pump float switch component part consisting of pump float ball; electronic controls for fluid pumps; pressure switches as parts of machines; time switches; temperature switches as parts of machines; humidistats; float control switches; thermostats; timers; electronic control devices in the nature of temperature responsive fan controls; emergency warning lights; automatic gas valves; electric switches; transformers; capacitors; electric cord sets comprising cords, extension cords, and multi-conductor cords; electronic speed controls for power toolsClass 009 for Batteries; electric relay modules; electric relays; electric switches; electronic speed controllers for fans; fan switches; fan switches, namely, electrical switches used in turning fans on and off; heat pump elements, namely, electrical resistance heating wires; motor conduit boxes, namely, electrical junction and fuse boxes; pool junction boxes; pump control boxes, namely, electrical conduit boxes and circuit breakers used to provide electric power to one or more submersible pumps; pump controls, namely, electrical components being electrical conduit boxes and circuit breakers used to start or stop pumps; electrical relay sockets; remote control electric switches; electromagnetic solenoid coils; electromagnetic solenoid valves; automated valves, namely, unloading check valves for outlets and inlets for air compressors and pumps; pump accessories, namely, electronic pump float switch component part consisting of pump float ball; electronic controls for fluid pumps; time switches; humidistats; float control switches; thermostats; timers; electronic control devices in the nature of temperature responsive fan controls; emergency warning lights; automatic gas valves; electric switches; transformers; capacitors; electric cord sets comprising cords, extension cords, and multi-conductor cords; electronic speed controls for power tools
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 011 for Electric fans; air curtains, namely, cold and hot air blowers for room openings; air filters for use with heating, ventilation and air conditioning equipment; air handlers; blower shafts, namely, rolled steel shafts for power-operated belt drive blowers; carpet dryers, namely, electro-mechanical units that provide airflow across a floor to speed the drying time of wet carpet or standing water; ceiling fans; circulator stands, namely, metal stands used on floor-based air circulators; non-electronic, metal or plastic dampers used in air ducts for controlling air flow; electric heating fans; electric hot air hand dryers; electric swimming pool lights; evaporator coil for air conditioning units; filter racks, namely, structural parts of heating, ventilation and air conditioning equipment in the nature of devices that hold air filters; forced air heaters; gas fired tube heaters; heat pumps; heat slingers, namely, metal devices that mount to the shaft of blowers and are used to reduce the temperature of hot air moving through the blower; hex hubs being replacement structural parts for air conditioning condensing units, namely, hexagonal shaped metal mounting devices used for fans to accommodate varying blade shaft sizes; household air cleaners; infrared heaters; inline strainers for water lines; oil-fired heaters; packaged air conditioning units; plumbing fixtures, namely, grease traps; roof top ventilators for buildings; tune-up service kits, namely, service kits for portable gas heaters comprising air filters, spark plugs, rotors, and photocells; ventilating fans for industrial and commercial use; weather hoods for fans; pump water filters; pump suction strainers, namely, strainers for use with fluid pumps; valves being parts of water sprayers; refrigerators; freezers; refrigerated beverage dispensing units; electric beverage heaters; beverage-cooling apparatus; electric beverage warmers; beverage cooling and ice dispensing machines; electric lighting fixtures, namely, modular tower lights; lighting fixtures; electric hair dryers; hand-held hair dryers; exhaust and ventilating fans; exhaust fan mounting roof curbs; humidifiers and dehumidifiers; electric and gas fired furnaces and heating units; furnace blowers and furnace blower-filter package units; electric lighting fixtures
Original Filing Basis:
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.

Proposed:
Tracked Text Description: Electric fans; air curtains, namely, cold and hot air blowers for room openings; air filters for use with heating, ventilation and air conditioning equipment; air handlers; blower shafts, namely, rolled steel shafts for power-operated belt drive blowers; blower shafts, namely, rolled steel shafts for power-operated belt drive hot air blowers; carpet dryers, namely, electro-mechanical units that provide airflow across a floor to speed the drying time of wet carpet or standing water; ceiling fans; circulator stands, namely, metal stands used on floor-based air circulators; non-electronic, metal or plastic dampers used in air ducts for controlling air flow; electric heating fans; electric hot air hand dryers; electric swimming pool lights; evaporator coil for air conditioning units; filter racks, namely, structural parts of heating, ventilation and air conditioning equipment in the nature of devices that hold air filters; forced air heaters; gas fired tube heaters; heat pumps; heat slingers, namely, metal devices that mount to the shaft of blowers and are used to reduce the temperature of hot air moving through the blower; hex hubs being replacement structural parts for air conditioning condensing units, namely, hexagonal shaped metal mounting devices used for fans to accommodate varying blade shaft sizes; household air cleaners; infrared heaters; inline strainers for water lines; oil-fired heaters; packaged air conditioning units; plumbing fixtures, namely, grease traps; roof top ventilators for buildings; tune-up service kits, namely, service kits for portable gas heaters comprising air filters, spark plugs, rotors, and photocells; ventilating fans for industrial and commercial use; weather hoods for fans; pump water filters; pump suction strainers, namely, strainers for use with fluid pumps; pump suction strainers, namely, strainers for use with plumbing drains in the nature of fluid pumps; valves being parts of water sprayers; plumbing fittings in the nature of valves, specifically, being parts of water sprayers; refrigerators; freezers; refrigerated beverage dispensing units; electric beverage heaters; beverage-cooling apparatus; electric beverage warmers; beverage cooling and ice dispensing machines; electric lighting fixtures, namely, modular tower lights; lighting fixtures; electric hair dryers; hand-held hair dryers; exhaust and ventilating fans; exhaust fan mounting roof curbs; humidifiers and dehumidifiers; electric and gas fired furnaces and heating units; furnace blowers and furnace blower-filter package units; electric lighting fixtures; fan shutters, dampers, louvers for use in HVAC systems; fan guards for ventilating fans for industrial purposes; ventilators and ventilating systems in the nature of ventilating exhaust fans for use in HVAC systemsClass 011 for Electric fans; air curtains, namely, cold and hot air blowers for room openings; air filters for use with heating, ventilation and air conditioning equipment; air handlers; blower shafts, namely, rolled steel shafts for power-operated belt drive hot air blowers; carpet dryers, namely, electro-mechanical units that provide airflow across a floor to speed the drying time of wet carpet or standing water; ceiling fans; circulator stands, namely, metal stands used on floor-based air circulators; non-electronic, metal or plastic dampers used in air ducts for controlling air flow; electric heating fans; electric hot air hand dryers; electric swimming pool lights; evaporator coil for air conditioning units; filter racks, namely, structural parts of heating, ventilation and air conditioning equipment in the nature of devices that hold air filters; forced air heaters; gas fired tube heaters; heat pumps; heat slingers, namely, metal devices that mount to the shaft of blowers and are used to reduce the temperature of hot air moving through the blower; hex hubs being replacement structural parts for air conditioning condensing units, namely, hexagonal shaped metal mounting devices used for fans to accommodate varying blade shaft sizes; household air cleaners; infrared heaters; inline strainers for water lines; oil-fired heaters; packaged air conditioning units; plumbing fixtures, namely, grease traps; roof top ventilators for buildings; tune-up service kits, namely, service kits for portable gas heaters comprising air filters, spark plugs, rotors, and photocells; ventilating fans for industrial and commercial use; weather hoods for fans; pump water filters; pump suction strainers, namely, strainers for use with plumbing drains in the nature of fluid pumps; plumbing fittings in the nature of valves, specifically, being parts of water sprayers; refrigerators; freezers; refrigerated beverage dispensing units; electric beverage heaters; beverage-cooling apparatus; electric beverage warmers; beverage cooling and ice dispensing machines; electric lighting fixtures, namely, modular tower lights; lighting fixtures; electric hair dryers; hand-held hair dryers; exhaust and ventilating fans; exhaust fan mounting roof curbs; humidifiers and dehumidifiers; electric and gas fired furnaces and heating units; furnace blowers and furnace blower-filter package units; electric lighting fixtures; fan shutters, dampers, louvers for use in HVAC systems; fan guards for ventilating fans for industrial purposes; ventilators and ventilating systems in the nature of ventilating exhaust fans for use in HVAC systems
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.
SIGNATURE(S)
Response Signature
Signature: /Jeffrey P. Dunning/     Date: 06/12/2017
Signatory's Name: Jeffrey P. Dunning
Signatory's Position: Attorney of record, Illinois bar member

Signatory's Phone Number: 312.456.8400

The signatory has confirmed that he/she is an attorney who is a member in good standing of the bar of the highest court of a U.S. state, which includes the District of Columbia, Puerto Rico, and other federal territories and possessions; and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S. attorney or a Canadian attorney/agent not currently associated with his/her company/firm previously represented the owner/holder in this matter: (1) the owner/holder has filed or is concurrently filing a signed revocation of or substitute power of attorney with the USPTO; (2) the USPTO has granted the request of the prior representative to withdraw; (3) the owner/holder has filed a power of attorney appointing him/her in this matter; or (4) the owner's/holder's appointed U.S. attorney or Canadian attorney/agent has filed a power of attorney appointing him/her as an associate attorney in this matter.

        
Serial Number: 86916725
Internet Transmission Date: Mon Jun 12 16:01:59 EDT 2017
TEAS Stamp: USPTO/ROA-XXX.XXX.XX.XX-2017061216015971
6220-86916725-59014db33ae9863c7d37692341
53a74b9678714a548b9f868aabf8bc4060f1a5-N
/A-N/A-20170612150816496041