Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 07/31/2017)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 07/31/2017)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 86916725 DAYTON (Stylized and/or with Design, see http://uspto.report/TM/86916725/mark.png) has been amended as follows:

MARK
Applicant proposes to amend the mark as follows:
Current: DAYTON (Stylized and/or with Design, see http://uspto.report/TM/86916725/mark.png)
Proposed: DAYTON (Stylized and/or with Design, see mark)
The color(s) red and white is/are claimed as a feature of the mark.
The mark consists of the term "DAYTON" in white block lettering on a solid red background.

CLASSIFICATION AND LISTING OF GOODS/SERVICES
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 006 for Metal water tanks; metal nozzles and couplings for use with plastic and rubber hoses; kits of metal mating flange members; kits of metal mechanical couplings; air compressor tanks; air compressor accessories, namely, metal couplings used to attach an air tool to the compressed air system; blower supports, namely, metal brackets used with blowers to allow for multiple positioning of the blower; curb caps, namely, metal caps mounted to roof ventilators used as covers; cylinder rod clevis with pins, namely, a metal component used to attach an air cylinder to a work surface; discharge caps, namely, metal caps used with industrial roof fans used for capturing and discharging moisture; drum and barrel pump accessories, namely, metal suction tube used for the discharge of liquids from a drum or barrel; drum cradles, namely, metal brackets used to hold or store metal storage drums for ease of mobility or use; elbow pipe fittings of metal; electric fan bases, namely, metal stands for fans; electric fan trays, namely, metal housings for fans; fan mounting hardware, namely, metal brackets used in mounting fans to ceilings or walls; foot switch guards, namely, a metal box enclosing a machine foot switch so as to protect the machine operator`s foot from injury; gas heater vents of metal; gear motor accessories, namely, metal brackets used for mounting gear motors in multiple positions; heater brackets, namely, metal brackets used to mount various types of heaters in different types of heating situations; hoist chain containers, namely, metal boxes attached to overhead hoists used to store excess hoist chain so as not to hang down and pose a safety hazard; linear actuator accessories, namely, metal shafts, tubes, screws, brackets and clamps to allow multiple mounting positions of AC and DC motors for machines; metal beam clamps; metal cylinder brackets for air compressors; metal drive mandrels for AC and DC motors for industrial and commercial use; metal flanges; metal roof curbs; metal roof vents for use in heating, ventilation and air conditioning systems for residential and commercial use; metal shaft collars; metal support braces for construction; milling tables, namely, cast iron table and base to support milling machines and accessories therefor, namely, metal clamps, metal studs and metal nuts; motor conversion kits comprised of metal discs that attach to AC and DC motors to allow for multiple mounting types; motor rails, namely, cast iron brackets used for floor mounting of AC and DC motors for machines; motor ring adapters, namely, metal rings used to mount AC and DC motors for machines; non-automatic metal fuel nozzles; quick couplers, namely, hose couplings made of metal used to connect pressure washer hoses to each other or to accessories such as sprayers and guns; stationary and movable metal shutters for fans; steel drums; tube heater accessories, namely, metal air inlet caps for mounting outside at the end of side wall vents; ventilator bird screens, namely, metal screens used to cover ventilation pipes to prevent birds from making nests in the pipes; ventilator hinge kits, namely, metal hinges, cable, nuts and bolts attached to ventilators allowing ventilators to be tilted for easy cleaning and inspection; venturi fan frames, namely, metal frames used for mounting direct drive fans in walls; wall collars for fans, namely, metal collars used to install vertically mounted supply and exhaust fans; hydronic heater guards, namely, metal guards to cover hydronic heaters; light traps for fans, namely, metal devices mounted on roof fans in order to prevent light from entering building structures; steel tubes for use with pumps in the nature of pump suction tubes; metal chains; chain hoist used for lifting and rigging
Original Filing Basis:
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.

Proposed:
Tracked Text Description: Metal water tanks; Metal water tanks, namely, industrial water tanks of metal; metal nozzles and couplings for use with plastic and rubber hoses; metal spray and fuel nozzles for commercial and industrial use and couplings for use with plastic and rubber hoses; kits of metal mating flange members; kits of metal mechanical couplings; kits of metal mechanical couplings, namely, metal couplings for use with power transmission equipment; air compressor tanks; air compressor tanks, namely, containers of metal for compressed air; air compressor accessories, namely, metal couplings used to attach an air tool to the compressed air system; air compressor accessories, namely, metal couplings used to attach an air tool to a hose or fitting used in a compressed air system; blower supports, namely, metal brackets used with blowers to allow for multiple positioning of the blower; curb caps, namely, metal caps mounted to roof ventilators used as covers; cylinder rod clevis with pins, namely, a metal component used to attach an air cylinder to a work surface; discharge caps, namely, metal caps used with industrial roof fans used for capturing and discharging moisture; drum and barrel pump accessories, namely, metal suction tube used for the discharge of liquids from a drum or barrel; drum cradles, namely, metal brackets used to hold or store metal storage drums for ease of mobility or use; elbow pipe fittings of metal; electric fan bases, namely, metal stands for fans; electric fan bases, namely, metal stands for fans in the nature of pedestals of metal; electric fan trays, namely, metal housings for fans; electric fan trays, namely, metal housings for fans in the nature of metal enclosures for fans; fan mounting hardware, namely, metal brackets used in mounting fans to ceilings or walls; foot switch guards, namely, a metal box enclosing a machine foot switch so as to protect the machine operator`s foot from injury; gas heater vents of metal; gas heater vents of metal, namely, metal roof vents for heating in residential and commercial buildings; gear motor accessories, namely, metal brackets used for mounting gear motors in multiple positions; heater brackets, namely, metal brackets used to mount various types of heaters in different types of heating situations; hoist chain containers, namely, metal boxes attached to overhead hoists used to store excess hoist chain so as not to hang down and pose a safety hazard; linear actuator accessories, namely, metal shafts, tubes, screws, brackets and clamps to allow multiple mounting positions of AC and DC motors for machines; metal beam clamps; metal cylinder brackets for air compressors; metal drive mandrels for AC and DC motors for industrial and commercial use; metal flanges; metal roof curbs; metal roof vents for use in heating, ventilation and air conditioning systems for residential and commercial use; metal shaft collars; metal support braces for construction; milling tables, namely, cast iron table and base to support milling machines and accessories therefor, namely, metal clamps, metal studs and metal nuts; motor conversion kits comprised of metal discs that attach to AC and DC motors to allow for multiple mounting types; motor rails, namely, cast iron brackets used for floor mounting of AC and DC motors for machines; motor ring adapters, namely, metal rings used to mount AC and DC motors for machines; non-automatic metal fuel nozzles; quick couplers, namely, hose couplings made of metal used to connect pressure washer hoses to each other or to accessories such as sprayers and guns; stationary and movable metal shutters for fans; steel drums; tube heater accessories, namely, metal air inlet caps for mounting outside at the end of side wall vents; ventilator bird screens, namely, metal screens used to cover ventilation pipes to prevent birds from making nests in the pipes; ventilator hinge kits, namely, metal hinges, cable, nuts and bolts attached to ventilators allowing ventilators to be tilted for easy cleaning and inspection; venturi fan frames, namely, metal frames used for mounting direct drive fans in walls; wall collars for fans, namely, metal collars used to install vertically mounted supply and exhaust fans; hydronic heater guards, namely, metal guards to cover hydronic heaters; light traps for fans, namely, metal devices mounted on roof fans in order to prevent light from entering building structures; steel tubes for use with pumps in the nature of pump suction tubes; metal chains; chain hoist used for lifting and riggingClass 006 for Metal water tanks, namely, industrial water tanks of metal; metal spray and fuel nozzles for commercial and industrial use and couplings for use with plastic and rubber hoses; kits of metal mating flange members; kits of metal mechanical couplings, namely, metal couplings for use with power transmission equipment; air compressor tanks, namely, containers of metal for compressed air; air compressor accessories, namely, metal couplings used to attach an air tool to a hose or fitting used in a compressed air system; blower supports, namely, metal brackets used with blowers to allow for multiple positioning of the blower; curb caps, namely, metal caps mounted to roof ventilators used as covers; cylinder rod clevis with pins, namely, a metal component used to attach an air cylinder to a work surface; discharge caps, namely, metal caps used with industrial roof fans used for capturing and discharging moisture; drum and barrel pump accessories, namely, metal suction tube used for the discharge of liquids from a drum or barrel; drum cradles, namely, metal brackets used to hold or store metal storage drums for ease of mobility or use; elbow pipe fittings of metal; electric fan bases, namely, metal stands for fans in the nature of pedestals of metal; electric fan trays, namely, metal housings for fans in the nature of metal enclosures for fans; fan mounting hardware, namely, metal brackets used in mounting fans to ceilings or walls; foot switch guards, namely, a metal box enclosing a machine foot switch so as to protect the machine operator`s foot from injury; gas heater vents of metal, namely, metal roof vents for heating in residential and commercial buildings; gear motor accessories, namely, metal brackets used for mounting gear motors in multiple positions; heater brackets, namely, metal brackets used to mount various types of heaters in different types of heating situations; hoist chain containers, namely, metal boxes attached to overhead hoists used to store excess hoist chain so as not to hang down and pose a safety hazard; linear actuator accessories, namely, metal shafts, tubes, screws, brackets and clamps to allow multiple mounting positions of AC and DC motors for machines; metal beam clamps; metal cylinder brackets for air compressors; metal drive mandrels for AC and DC motors for industrial and commercial use; metal flanges; metal roof curbs; metal roof vents for use in heating, ventilation and air conditioning systems for residential and commercial use; metal shaft collars; metal support braces for construction; milling tables, namely, cast iron table and base to support milling machines and accessories therefor, namely, metal clamps, metal studs and metal nuts; motor conversion kits comprised of metal discs that attach to AC and DC motors to allow for multiple mounting types; motor rails, namely, cast iron brackets used for floor mounting of AC and DC motors for machines; motor ring adapters, namely, metal rings used to mount AC and DC motors for machines; non-automatic metal fuel nozzles; quick couplers, namely, hose couplings made of metal used to connect pressure washer hoses to each other or to accessories such as sprayers and guns; stationary and movable metal shutters for fans; steel drums; tube heater accessories, namely, metal air inlet caps for mounting outside at the end of side wall vents; ventilator bird screens, namely, metal screens used to cover ventilation pipes to prevent birds from making nests in the pipes; ventilator hinge kits, namely, metal hinges, cable, nuts and bolts attached to ventilators allowing ventilators to be tilted for easy cleaning and inspection; venturi fan frames, namely, metal frames used for mounting direct drive fans in walls; wall collars for fans, namely, metal collars used to install vertically mounted supply and exhaust fans; hydronic heater guards, namely, metal guards to cover hydronic heaters; light traps for fans, namely, metal devices mounted on roof fans in order to prevent light from entering building structures; steel tubes for use with pumps in the nature of pump suction tubes; metal chains; chain hoist used for lifting and rigging
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 007 for Air compressors and parts therefor; motor driven, engine driven and hand-operated fluid pumps and replacement parts therefor; fluid solutions injectors; pump repair kits comprising mechanical seals and bearing assemblies and parts therefor; electric motors for machines; fans for machines; pumps for motors for machines; motor arbors; motor bases; motor brackets; motor brakes; motor brushes; motor clutches; motor conduit boxes; motor conversion kits; motor mounting rings; motor mountings; motor rails; motor rainshields; motor ring adapters; motor rings; motor shaft adapters; motor speed controllers; motor springs; motor switch boxes; motor switches; fan blades; fan dampers; fan guards; fan motors; fan mounting bolts; fan shutters; pump shaft seals; AC and DC generators; adjustable speed drives for industrial machinery; air-driven, battery operated, engine driven, and motor driven air and fluid pumps for industrial and commercial use; arbor press stands; arbor presses; band saw stands; band saws; belt sanders; blade welders; blower nozzles for power operated blowers; electric chain hoists; commercial and industrial floor sweepers; DC gear motors; drill stop collars; drum mixers; dust collector hose for vacuum cleaners; dust collectors, namely, dust separators; electric AC gear motors; electric generators; electric starters for motors and engines; electric switches that are sold as integral component part of electric pumps; filters for use with vacuums; floor cranes; garbage disposals; linear actuator boots; linear actuators; machine parts, namely, bearings and bushings; machine parts, namely, air cylinder end mounts and air cylinders; machine parts, namely, belt tensioners, not for land vehicles; magnetic starters for motors and engines; milling machines; motor sheaves, namely, a metal wheel or disk with a grooved rim to accommodate drive belts for machines; motor/reducer combinations, namely, a combination of a speed reducer machine and an AC or DC motor for use in industrial and commercial applications; paint tank gaskets sold as an integral component of painting spray guns; paint tanks sold as an integral component of painting spray guns; power drill presses; power operated buffing wheels; power operated buffers; pump motor adapters, namely, metal or non-metal adapters used to connect a pump to an AC or DC motor; pump motor bases, namely, metal or non-metal bases where a pump is attached in order to keep the pump in place; pump pedestals, namely, mechanical machines that attach to fluid pumps in order to convert pumps to belt driven or direct drive pump; pump spray nozzles for use in power wash systems; pump trap baskets, namely, metal and non-metal baskets used to filter liquids prior to entering a pump; pump valves; rip fences, namely, saw fences for use on table saws; roller pump PTO couplings, namely, metal components used to connect pumps to tractor drive shafts; shaft couplings for machines; shear and roll machines; sheet metal notchers, namely, metalworking machines used to put notches in sheet metal; spray nozzles for power sprayers, namely, machine parts being parts of power-operated sprayers; vacuum attachments accessories, namely, foam sleeves, hose, nozzles, rug shoes, squeegee shoes, and wands which attach to vacuum hoses; wands, namely, metal or non-metal tubes which attach to machine hoses in order to increase the reach of the hoses; winches; wire rope manipulators, namely, a hoist lifting device for raising heavy or cumbersome objects utilizing wire rope; drive belts for machinery; blowers; exhaust and ventilating fans; heat distributing fans; fan blades; fan shutters; dampers; stationary and movable louvers; fan guards; exhaust fan mounting roof curbs; humidifiers and dehumidifiers; electric and gas fired furnaces and heating units; furnace blowers and furnace blower-filter package units; ventilators and ventilating systems; fume exhausters; hose and hose fittings; gas-operated cutting torches; electric and gas welding machines; automatic gas valves; electric motors; electric fans; electric switches; magnetic starters; transformers; capacitors; electric power plants and generators; electric cord sets comprising cords, extension cords, and multi-conductor cords; electric lighting fixtures; electronic speed controls for power tools; grinding wheels; abrasive sheets, discs and belts; power transmission and take-off apparatus, namely, speed reducers, flexible transmission shafts, and clutches; motor mounts; power tool stands; pillow blocks; bearing blocks and shaft collars; industrial and commercial vacuum cleaning and pick-up units and attachments therefor; steam cleaners; saw blades; motorized and hand operated hoists; hydraulic cranes and jacks; polishing heads; transmission chains, other than for land vehicles; power-operated tools, namely, grinders; electric sanders; abrasive discs for power-operated sanders; gas-operated power generator; oil pumps; fuel filters; floor polishers
Original Filing Basis:
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.

Proposed:
Tracked Text Description: Air compressors and parts therefor; Air compressors; motor driven, engine driven and hand-operated fluid pumps and replacement parts therefor; motor driven, engine driven and hand-operated fluid pumps and parts of machines, motors and engines, and replacement parts therefor; fluid solutions injectors; fluid solutions injectors in the nature of components for fluid pumps; pump repair kits comprising mechanical seals and bearing assemblies and parts therefor; pump repair kits comprising mechanical seals and bearing assemblies, namely, bearings as parts of machines; electric motors for machines; fans for machines; fans for machine motors and engines; pumps for motors for machines; motor arbors; parts for electric motors for machines, namely, motor arbors, motor bases, motor brackets, motor brakes, motor brushes, motor clutches, motor conduit boxes, motor conversion kits, motor mounting rings, motor mountings, motor rails, motor rainshields, motor ring adapters, motor rings, motor shaft adapters, motor speed controllers, motor springs, motor switch boxes, motor switches, fan blades, fan dampers, fan guards, fan motors, fan mounting bolts, fan shutters, pump shaft seals; motor bases; AC and DC generators; motor brackets; adjustable speed drives for industrial machinery; motor brakes; air-driven, battery operated, engine driven, and motor driven air and fluid pumps for industrial and commercial use; motor brushes; arbor press stands, namely, a stand for an arbor press which is a press for metalworking; motor clutches; arbor presses, namely, presses used for metalworking; motor conduit boxes; band saw stands; motor conversion kits; band saws; motor mounting rings; electric belt sanders; motor mountings; blade welders in the nature of electric welding machines; motor rails; blower nozzles for power operated blowers; motor rainshields; electric chain hoists; motor ring adapters; commercial and industrial floor sweepers in the nature of push sweepers; motor rings; DC gear motors in the nature of electric motors for machines; motor shaft adapters; bits for power drills, namely, drill stop collars; motor speed controllers; drum mixers in the nature of mixing machines; motor springs; dust collector hose for vacuum cleaners; motor switch boxes; dust collectors, namely, dust separators; motor switches; electric AC gear motors; fan blades; electric generators; fan dampers; electric starters for motors and engines; fan guards; electric switches that are sold as integral component part of electric pumps; fan motors; filters for use with vacuums; fan mounting bolts; floor cranes; fan shutters; garbage disposals; pump shaft seals; linear actuator boots; linear actuators; machine parts, namely, bearings and bushings; compressed air machine parts, namely, air cylinder end mounts and air cylinders; arbor press stands; machine parts, namely, belt tensioners, not for land vehicles; arbor presses; magnetic starters for motors and engines; milling machines; motor sheaves, namely, a metal wheel or disk with a grooved rim to accommodate drive belts for machines; belt sanders; motor/reducer combinations, namely, a combination of a speed reducer machine and an AC or DC motor for use in industrial and commercial applications; blade welders; paint tank gaskets sold as an integral component of painting spray guns; paint tanks sold as an integral component of painting spray guns; power drill presses; commercial and industrial floor sweepers; power operated buffing wheels; DC gear motors; power operated buffers; drill stop collars; pump motor adapters, namely, metal or non-metal adapters used to connect a pump to an AC or DC motor; drum mixers; pump motor bases, namely, metal or non-metal bases where a pump is attached in order to keep the pump in place; pump pedestals, namely, mechanical machines that attach to fluid pumps in order to convert pumps to belt driven or direct drive pump; pump spray nozzles for use in power wash systems; pump trap baskets, namely, metal and non-metal baskets used to filter liquids prior to entering a pump; pump valves; rip fences, namely, saw fences for use on table saws; roller pump PTO couplings, namely, metal components used to connect pumps to tractor drive shafts; shaft couplings for machines; metal working machines, namely, shear and roll machines; sheet metal notchers, namely, metalworking machines used to put notches in sheet metal; spray nozzles for power sprayers, namely, machine parts being parts of power-operated sprayers; vacuum attachments accessories, namely, foam sleeves, hose, nozzles, rug shoes, squeegee shoes, and wands which attach to vacuum hoses; wands, namely, metal or non-metal tubes which attach to machine hoses in order to increase the reach of the hoses; machine parts, namely, air cylinder end mounts and air cylinders; winches; wire rope manipulators, namely, a hoist lifting device for raising heavy or cumbersome objects utilizing wire rope; drive belts for machinery; power-operated blowers; heat distributing fans in the nature of fans for machine engines; fan blades for fans for machine blades; fan shutters, dampers and louvers for use in HVAC systems; fan guards for ventilating fans; ventilators and ventilating systems for use in HVAC systems; fume exhausters, namely, power-operated blowers; hose and hose fittings for power-operated machinery; gas-operated cutting torches; electric and gas welding machines; electric motors for machines; electric fans; magnetic starters for motors and engines; electric generators; power-operated grinding wheels; abrasive sheets, discs and belts for power-operated grinders; power transmission and take-off apparatus for machines other than land vehicles, namely, speed reducers, flexible transmission shafts, and clutches; shear and roll machines; motor mounts, namely, bases and brackets for attaching an electric motor to a surface; power tool stands; pillow blocks and bearing blocks and shaft collars in the nature of bearing housings for machines; industrial and commercial vacuum cleaning and pick-up units and attachments therefor; steam cleaners; power saw blades; motorized and hand operated hoists; hydraulic cranes and jacks; blowers; polishing discs for power-operated polishers; exhaust and ventilating fans; transmission chains, other than for land vehicles; heat distributing fans; power-operated tools, namely, grinders; fan blades; electric sanders; fan shutters; abrasive discs for power-operated sanders; dampers; gas-operated power generator; stationary and movable louvers; oil and fuel transfer pumps, namely, electric pumps; fan guards; fuel filters; exhaust fan mounting roof curbs; floor polishers; humidifiers and dehumidifiers; electric and gas fired furnaces and heating units; furnace blowers and furnace blower-filter package units; ventilators and ventilating systems; fume exhausters; hose and hose fittings; automatic gas valves; electric motors; electric switches; magnetic starters; transformers; capacitors; electric power plants and generators; electric cord sets comprising cords, extension cords, and multi-conductor cords; electric lighting fixtures; electronic speed controls for power tools; grinding wheels; abrasive sheets, discs and belts; power transmission and take-off apparatus, namely, speed reducers, flexible transmission shafts, and clutches; motor mounts; pillow blocks; bearing blocks and shaft collars; saw blades; polishing heads; oil pumpsClass 007 for Air compressors; motor driven, engine driven and hand-operated fluid pumps and parts of machines, motors and engines, and replacement parts therefor; fluid solutions injectors in the nature of components for fluid pumps; pump repair kits comprising mechanical seals and bearing assemblies, namely, bearings as parts of machines; electric motors for machines; fans for machine motors and engines; pumps for motors for machines; parts for electric motors for machines, namely, motor arbors, motor bases, motor brackets, motor brakes, motor brushes, motor clutches, motor conduit boxes, motor conversion kits, motor mounting rings, motor mountings, motor rails, motor rainshields, motor ring adapters, motor rings, motor shaft adapters, motor speed controllers, motor springs, motor switch boxes, motor switches, fan blades, fan dampers, fan guards, fan motors, fan mounting bolts, fan shutters, pump shaft seals; AC and DC generators; adjustable speed drives for industrial machinery; air-driven, battery operated, engine driven, and motor driven air and fluid pumps for industrial and commercial use; arbor press stands, namely, a stand for an arbor press which is a press for metalworking; arbor presses, namely, presses used for metalworking; band saw stands; band saws; electric belt sanders; blade welders in the nature of electric welding machines; blower nozzles for power operated blowers; electric chain hoists; commercial and industrial floor sweepers in the nature of push sweepers; DC gear motors in the nature of electric motors for machines; bits for power drills, namely, drill stop collars; drum mixers in the nature of mixing machines; dust collector hose for vacuum cleaners; dust collectors, namely, dust separators; electric AC gear motors; electric generators; electric starters for motors and engines; electric switches that are sold as integral component part of electric pumps; filters for use with vacuums; floor cranes; garbage disposals; linear actuator boots; linear actuators; machine parts, namely, bearings and bushings; compressed air machine parts, namely, air cylinder end mounts and air cylinders; machine parts, namely, belt tensioners, not for land vehicles; magnetic starters for motors and engines; milling machines; motor sheaves, namely, a metal wheel or disk with a grooved rim to accommodate drive belts for machines; motor/reducer combinations, namely, a combination of a speed reducer machine and an AC or DC motor for use in industrial and commercial applications; paint tank gaskets sold as an integral component of painting spray guns; paint tanks sold as an integral component of painting spray guns; power drill presses; power operated buffing wheels; power operated buffers; pump motor adapters, namely, metal or non-metal adapters used to connect a pump to an AC or DC motor; pump motor bases, namely, metal or non-metal bases where a pump is attached in order to keep the pump in place; pump pedestals, namely, mechanical machines that attach to fluid pumps in order to convert pumps to belt driven or direct drive pump; pump spray nozzles for use in power wash systems; pump trap baskets, namely, metal and non-metal baskets used to filter liquids prior to entering a pump; pump valves; rip fences, namely, saw fences for use on table saws; roller pump PTO couplings, namely, metal components used to connect pumps to tractor drive shafts; shaft couplings for machines; metal working machines, namely, shear and roll machines; sheet metal notchers, namely, metalworking machines used to put notches in sheet metal; spray nozzles for power sprayers, namely, machine parts being parts of power-operated sprayers; vacuum attachments accessories, namely, foam sleeves, hose, nozzles, rug shoes, squeegee shoes, and wands which attach to vacuum hoses; wands, namely, metal or non-metal tubes which attach to machine hoses in order to increase the reach of the hoses; winches; wire rope manipulators, namely, a hoist lifting device for raising heavy or cumbersome objects utilizing wire rope; drive belts for machinery; power-operated blowers; heat distributing fans in the nature of fans for machine engines; fan blades for fans for machine blades; fan shutters, dampers and louvers for use in HVAC systems; fan guards for ventilating fans; ventilators and ventilating systems for use in HVAC systems; fume exhausters, namely, power-operated blowers; hose and hose fittings for power-operated machinery; gas-operated cutting torches; electric and gas welding machines; electric motors for machines; electric fans; magnetic starters for motors and engines; electric generators; power-operated grinding wheels; abrasive sheets, discs and belts for power-operated grinders; power transmission and take-off apparatus for machines other than land vehicles, namely, speed reducers, flexible transmission shafts, and clutches; motor mounts, namely, bases and brackets for attaching an electric motor to a surface; power tool stands; pillow blocks and bearing blocks and shaft collars in the nature of bearing housings for machines; industrial and commercial vacuum cleaning and pick-up units and attachments therefor; steam cleaners; power saw blades; motorized and hand operated hoists; hydraulic cranes and jacks; polishing discs for power-operated polishers; transmission chains, other than for land vehicles; power-operated tools, namely, grinders; electric sanders; abrasive discs for power-operated sanders; gas-operated power generator; oil and fuel transfer pumps, namely, electric pumps; fuel filters; floor polishers
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 009 for Batteries; electric relay modules; electric relays; electric switches; electronic speed controllers for fans; fan switches; fan switches, namely, electrical switches used in turning fans on and off; heat pump elements, namely, electrical resistance heating wires; motor conduit boxes, namely, electrical junction and fuse boxes; pool junction boxes; pump control boxes, namely, electrical conduit boxes and circuit breakers used to provide electric power to one or more submersible pumps; pump controls, namely, electrical components being electrical conduit boxes and circuit breakers used to start or stop pumps; relay sockets; remote control electric switches; solenoid coils; solenoid valves; automated valves, namely, unloading check valves for outlets and inlets for air compressors and pumps; pump accessories, namely, pump float switch component part consisting of pump float ball; electronic controls for fluid pumps; pressure control switches; temperature control switches; time switches; humidistats; float control switches; thermostats; timers; temperature responsive fan controls; emergency warning lights
Original Filing Basis:
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.

Proposed:
Tracked Text Description: Batteries; electric relay modules; electric relays; electric switches; electronic speed controllers for fans; fan switches; fan switches, namely, electrical switches used in turning fans on and off; heat pump elements, namely, electrical resistance heating wires; motor conduit boxes, namely, electrical junction and fuse boxes; pool junction boxes; pump control boxes, namely, electrical conduit boxes and circuit breakers used to provide electric power to one or more submersible pumps; pump controls, namely, electrical components being electrical conduit boxes and circuit breakers used to start or stop pumps; relay sockets; electrical relay sockets; remote control electric switches; solenoid coils; electromagnetic solenoid coils; solenoid valves; electromagnetic solenoid valves; automated valves, namely, unloading check valves for outlets and inlets for air compressors and pumps; pump accessories, namely, pump float switch component part consisting of pump float ball; pump accessories, namely, electronic pump float switch component part consisting of pump float ball; electronic controls for fluid pumps; pressure control switches; pressure switches as parts of machines; temperature control switches; temperature switches as parts of machines; time switches; humidistats; float control switches; thermostats; timers; temperature responsive fan controls; electronic control devices in the nature of temperature responsive fan controls; emergency warning lights; automatic gas valves; electric switches; transformers; capacitors; electric cord sets comprising cords, extension cords, and multi-conductor cords; electronic speed controls for power toolsClass 009 for Batteries; electric relay modules; electric relays; electric switches; electronic speed controllers for fans; fan switches; fan switches, namely, electrical switches used in turning fans on and off; heat pump elements, namely, electrical resistance heating wires; motor conduit boxes, namely, electrical junction and fuse boxes; pool junction boxes; pump control boxes, namely, electrical conduit boxes and circuit breakers used to provide electric power to one or more submersible pumps; pump controls, namely, electrical components being electrical conduit boxes and circuit breakers used to start or stop pumps; electrical relay sockets; remote control electric switches; electromagnetic solenoid coils; electromagnetic solenoid valves; automated valves, namely, unloading check valves for outlets and inlets for air compressors and pumps; pump accessories, namely, electronic pump float switch component part consisting of pump float ball; electronic controls for fluid pumps; pressure switches as parts of machines; temperature switches as parts of machines; time switches; humidistats; float control switches; thermostats; timers; electronic control devices in the nature of temperature responsive fan controls; emergency warning lights; automatic gas valves; electric switches; transformers; capacitors; electric cord sets comprising cords, extension cords, and multi-conductor cords; electronic speed controls for power tools;
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 011 for Electric fans; air curtains, namely, cold and hot air blowers for room openings; air filters for use with heating, ventilation and air conditioning equipment; air handlers; blower shafts; carpet dryers, namely, electro-mechanical units that provide airflow across a floor to speed the drying time of wet carpet or standing water; ceiling fans; circulator stands, namely, metal stands used on floor-based air circulators; non-electronic, metal or plastic dampers used in air ducts for controlling air flow; electric heating fans; electric hot air hand dryers; electric swimming pool lights; evaporator coil for air conditioning units; filter racks, namely, structural parts of heating, ventilation and air conditioning equipment in the nature of devices that hold air filters; forced air heaters; gas fired tube heaters; heat pumps; heat slingers, namely, metal devices that mount to the shaft of blowers and are used to reduce the temperature of hot air moving through the blower; hex hubs being replacement structural parts for air conditioning condensing units, namely, hexagonal shaped metal mounting devices used for fans to accommodate varying blade shaft sizes; household air cleaners; infrared heaters; inline strainers for water lines; oil-fired heaters; packaged air conditioning units; plumbing fixtures, namely, grease traps; roof top ventilators for buildings; tune-up service kits, namely, service kits for portable gas heaters comprising air filters, spark plugs, rotors, and photocells; ventilating fans for industrial and commercial use; weather hoods for fans; pump water filters; pump suction strainers; valves for water sprayers; refrigerators; freezers; refrigerated beverage dispensing units; electric beverage heaters; beverage-cooling apparatus; electric beverage warmers; beverage cooling and ice dispensing machines; modular tower lights; lighting fixtures; electric hair dryers; hand-held hair dryers
Original Filing Basis:
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.

Proposed:
Tracked Text Description: Electric fans; air curtains, namely, cold and hot air blowers for room openings; air filters for use with heating, ventilation and air conditioning equipment; air handlers; blower shafts; blower shafts, namely, rolled steel shafts for power-operated belt drive blowers; carpet dryers, namely, electro-mechanical units that provide airflow across a floor to speed the drying time of wet carpet or standing water; ceiling fans; circulator stands, namely, metal stands used on floor-based air circulators; non-electronic, metal or plastic dampers used in air ducts for controlling air flow; electric heating fans; electric hot air hand dryers; electric swimming pool lights; evaporator coil for air conditioning units; filter racks, namely, structural parts of heating, ventilation and air conditioning equipment in the nature of devices that hold air filters; forced air heaters; gas fired tube heaters; heat pumps; heat slingers, namely, metal devices that mount to the shaft of blowers and are used to reduce the temperature of hot air moving through the blower; hex hubs being replacement structural parts for air conditioning condensing units, namely, hexagonal shaped metal mounting devices used for fans to accommodate varying blade shaft sizes; household air cleaners; infrared heaters; inline strainers for water lines; oil-fired heaters; packaged air conditioning units; plumbing fixtures, namely, grease traps; roof top ventilators for buildings; tune-up service kits, namely, service kits for portable gas heaters comprising air filters, spark plugs, rotors, and photocells; ventilating fans for industrial and commercial use; weather hoods for fans; pump water filters; pump suction strainers; pump suction strainers, namely, strainers for use with fluid pumps; valves for water sprayers; valves being parts of water sprayers; refrigerators; freezers; refrigerated beverage dispensing units; electric beverage heaters; beverage-cooling apparatus; electric beverage warmers; beverage cooling and ice dispensing machines; modular tower lights; electric lighting fixtures, namely, modular tower lights; lighting fixtures; electric hair dryers; hand-held hair dryers; exhaust and ventilating fans; exhaust fan mounting roof curbs; humidifiers and dehumidifiers; electric and gas fired furnaces and heating units; furnace blowers and furnace blower-filter package units; electric lighting fixturesClass 011 for Electric fans; air curtains, namely, cold and hot air blowers for room openings; air filters for use with heating, ventilation and air conditioning equipment; air handlers; blower shafts, namely, rolled steel shafts for power-operated belt drive blowers; carpet dryers, namely, electro-mechanical units that provide airflow across a floor to speed the drying time of wet carpet or standing water; ceiling fans; circulator stands, namely, metal stands used on floor-based air circulators; non-electronic, metal or plastic dampers used in air ducts for controlling air flow; electric heating fans; electric hot air hand dryers; electric swimming pool lights; evaporator coil for air conditioning units; filter racks, namely, structural parts of heating, ventilation and air conditioning equipment in the nature of devices that hold air filters; forced air heaters; gas fired tube heaters; heat pumps; heat slingers, namely, metal devices that mount to the shaft of blowers and are used to reduce the temperature of hot air moving through the blower; hex hubs being replacement structural parts for air conditioning condensing units, namely, hexagonal shaped metal mounting devices used for fans to accommodate varying blade shaft sizes; household air cleaners; infrared heaters; inline strainers for water lines; oil-fired heaters; packaged air conditioning units; plumbing fixtures, namely, grease traps; roof top ventilators for buildings; tune-up service kits, namely, service kits for portable gas heaters comprising air filters, spark plugs, rotors, and photocells; ventilating fans for industrial and commercial use; weather hoods for fans; pump water filters; pump suction strainers, namely, strainers for use with fluid pumps; valves being parts of water sprayers; refrigerators; freezers; refrigerated beverage dispensing units; electric beverage heaters; beverage-cooling apparatus; electric beverage warmers; beverage cooling and ice dispensing machines; electric lighting fixtures, namely, modular tower lights; lighting fixtures; electric hair dryers; hand-held hair dryers; exhaust and ventilating fans; exhaust fan mounting roof curbs; humidifiers and dehumidifiers; electric and gas fired furnaces and heating units; furnace blowers and furnace blower-filter package units; electric lighting fixtures
Filing Basis: Section 1(a), Use in Commerce: The applicant is using the mark in commerce, or the applicant's related company or licensee is using the mark in commerce, on or in connection with the identified goods and/or services. 15 U.S.C. Section 1051(a), as amended. The mark was first used at least as early as 02/00/1995 and first used in commerce at least as early as 02/00/1995 , and is now in use in such commerce.
SIGNATURE(S)
Response Signature
Signature: /Jeffrey P. Dunning/     Date: 11/22/2016
Signatory's Name: Jeffrey P. Dunning
Signatory's Position: Attorney of record, Illinois bar member

Signatory's Phone Number: 312.456.8400

The signatory has confirmed that he/she is an attorney who is a member in good standing of the bar of the highest court of a U.S. state, which includes the District of Columbia, Puerto Rico, and other federal territories and possessions; and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S. attorney or a Canadian attorney/agent not currently associated with his/her company/firm previously represented the owner/holder in this matter: (1) the owner/holder has filed or is concurrently filing a signed revocation of or substitute power of attorney with the USPTO; (2) the USPTO has granted the request of the prior representative to withdraw; (3) the owner/holder has filed a power of attorney appointing him/her in this matter; or (4) the owner's/holder's appointed U.S. attorney or Canadian attorney/agent has filed a power of attorney appointing him/her as an associate attorney in this matter.

        
Serial Number: 86916725
Internet Transmission Date: Tue Nov 22 11:09:38 EST 2016
TEAS Stamp: USPTO/ROA-XXX.XXX.XXX.XXX-20161122110938
927979-86916725-57023b457153bbfc35e5d5ce
0dc99fef43bf0e95cf526524aa062f9d24cd75ee
4-N/A-N/A-20161122110822513932