To: | Cenveo Corporation (tm-pto@ssjr.com) |
Subject: | U.S. TRADEMARK APPLICATION NO. 86856839 - QP - 04773-T0057A |
Sent: | 4/14/2016 10:48:11 AM |
Sent As: | ECOM109@USPTO.GOV |
Attachments: |
UNITED STATES PATENT AND TRADEMARK OFFICE (USPTO)
OFFICE ACTION (OFFICIAL LETTER) ABOUT APPLICANT’S TRADEMARK APPLICATION
U.S. APPLICATION SERIAL NO. 86856839
MARK: QP
|
|
CORRESPONDENT ADDRESS: |
CLICK HERE TO RESPOND TO THIS LETTER: http://www.gov.uspto.report/trademarks/teas/response_forms.jsp
|
APPLICANT: Cenveo Corporation
|
|
CORRESPONDENT’S REFERENCE/DOCKET NO: CORRESPONDENT E-MAIL ADDRESS: |
|
OFFICE ACTION
TO AVOID ABANDONMENT OF APPLICANT’S TRADEMARK APPLICATION, THE USPTO MUST RECEIVE APPLICANT’S COMPLETE RESPONSE TO THIS LETTER WITHIN 6 MONTHS OF THE ISSUE/MAILING DATE BELOW.
ISSUE/MAILING DATE: 4/14/2016
The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issues below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.
IDENTIFICATION OF GOODS AND SERVICES
The applicant has applied to register its mark in connection with the following:
Class 16: ADHESIVE LABELS; ENVELOPES; MAILERS; MAILING TUBES; MAILING LABELS; PADDED PAPER ENVELOPES FOR MAILING OR PACKAGING; PAPER LABELS; MOISTENERS IN THE NATURE OF HAND HELD DEVICES FOR WETTING STAMPS, ENVELOPES AND GUMMED PAPER SURFACES; PACKAGING MATERIALS
Class 40: MANUFACTURING OF ENVELOPES, LABELS, PACKAGING; PRINTING SERVICES
For the reasons discussed below, the identification must be clarified because it is too broad and could include goods and/or services in other international classes. See TMEP §§ 1402.01, 1402.03
The purpose of the identification of goods and/or services is to provide the general population, including consumers and members of the relevant industry, with an understandable description of the goods and services, which is done by using the common commercial name for the goods and/or services. In re Gulf Coast Nutritionals, Inc., 106 USPQ2d 1243, 1247 (TTAB 2013) (citing In re Sones, 590 F.3d 1282, 1289, 93 USPQ2d 1118, 1124 (Fed. Cir. 2009)). If there is no common, ordinary name for the goods and/or services, applicant should describe the goods and/or services using wording that would be generally understood by the average person. See Schenley Indus., Inc. v. Battistoni, 112 USPQ 485, 486 (Comm’r Pats. 1957); Cal. Spray-Chem. Corp. v. Osmose Wood Pres. Co. of Am., 102 USPQ 321, 322 (Comm’r Pats. 1954); TMEP §1402.01.
An in depth knowledge of the relevant field should not be necessary for understanding a description of the goods and/or services. TMEP §1402.01. “[T]echnical, high-sounding verbiage” should be avoided. Cal. Spray-Chem. Corp. v. Osmose Wood Pres. Co. of Am., 102 USPQ at 322.
The wording “mailers” is in ambiguous and applicant should specify the common commercial name of the item. The wording “mailing tubes” and “packaging materials” should specify the material out of which the mailing tubes are made; “plastic mailing tubes” are properly classified in International Class 20.
The word “manufacturing” in the identification of services is indefinite and must be clarified. See TMEP §1402.01. To be a service, an activity must be performed primarily for the benefit of someone other than the applicant. See In re Reichhold Chems., Inc., 167 USPQ 376, 377 (TTAB 1970). Manufacturing one’s own goods is not a service rendered for the benefit of others. See TMEP §§1301.01(a)(ii), 1402.11.
Therefore, applicant must amend the identification to specify that the manufacturing services are “custom manufacturing” or “manufacturing to the order and specification of others” or “contract manufacturing.”
Applicant may adopt any or all of the following identifications, if accurate:
CLASS 16 – Board mailers, namely, mailing envelopes and boxes made of paperboard, chipboard, cardboard, and corrugated board; envelopes; greeting cards; mailers, namely, paper envelopes for mailing; cardboard mailing tubes; mailing labels; padded paper envelopes for mailing or packaging; paper labels; packaging materials made of recycled paper
CLASS 20 – Plastic mailing tubes
CLASS 40 – Custom manufacturing of envelopes, labels, packaging to the specification of others; printing services
For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual at http://tess2.gov.uspto.report/netahtml/tidm.html. See TMEP §1402.04.
MULTIPLE-CLASS APPLICATION REQUIREMENTS
The application identifies goods and/or services in more than one international class; therefore, applicant must satisfy all the requirements below for each international class based on Trademark Act Section 1(b):
(1) List the goods and/or services by their international class number in consecutive numerical order, starting with the lowest numbered class.
(2) Submit a filing fee for each international class not covered by the fee(s) already paid (view the USPTO’s current fee schedule at http://www.gov.uspto.report/trademarks/tm_fee_info.jsp). The application identifies goods and/or services that are classified in at least three (3) classes; however, applicant submitted a fee(s) sufficient for only two (2) classes. Applicant must either submit the filing fees for the classes not covered by the submitted fees or restrict the application to the number of classes covered by the fees already paid.
See 15 U.S.C. §§1051(b), 1112, 1126(e); 37 C.F.R. §§2.32(a)(6)-(7), 2.34(a)(2)-(3), 2.86(a); TMEP §§1403.01, 1403.02(c).
For an overview of the requirements for a Section 1(b) multiple-class application and how to satisfy the requirements online using the Trademark Electronic Application System (TEAS) form, please go to http://www.gov.uspto.report/trademarks/law/multiclass.jsp.
SIGNIFICANCE OF THE MARK
Failure to respond to a request for information is an additional ground for refusing registration. See In re Cheezwhse.com, Inc., 85 USPQ2d 1917, 1919 (TTAB 2008); In re DTI P’ship LLP, 67 USPQ2d 1699, 1701 (TTAB 2003); TMEP §814.
If applicant does not respond to this Office action within six months of the issue/mailing date, or responds by expressly abandoning the application, the application process will end, the trademark will fail to register, and the application fee will not be refunded. See 15 U.S.C. §1062(b); 37 C.F.R. §§2.65(a), 2.68(a), 2.209(a); TMEP §§405.04, 718.01, 718.02. Where the application has been abandoned for failure to respond to an Office action, applicant’s only option would be to file a timely petition to revive the application, which, if granted, would allow the application to return to active status. See 37 C.F.R. §2.66; TMEP §1714. There is a $100 fee for such petitions. See 37 C.F.R. §§2.6, 2.66(b)(1).
Contacting the Examining Attorney
TEAS PLUS OR TEAS REDUCED FEE (TEAS RF) APPLICANTS – TO MAINTAIN LOWER FEE, ADDITIONAL REQUIREMENTS MUST BE MET, INCLUDING SUBMITTING DOCUMENTS ONLINE: Applicants who filed their application online using the lower-fee TEAS Plus or TEAS RF application form must (1) file certain documents online using TEAS, including responses to Office actions (see TMEP §§819.02(b), 820.02(b) for a complete list of these documents); (2) maintain a valid e-mail correspondence address; and (3) agree to receive correspondence from the USPTO by e-mail throughout the prosecution of the application. See 37 C.F.R. §§2.22(b), 2.23(b); TMEP §§819, 820. TEAS Plus or TEAS RF applicants who do not meet these requirements must submit an additional processing fee of $50 per international class of goods and/or services. 37 C.F.R. §§2.6(a)(1)(v), 2.22(c), 2.23(c); TMEP §§819.04, 820.04. However, in certain situations, TEAS Plus or TEAS RF applicants may respond to an Office action by authorizing an examiner’s amendment by telephone without incurring this additional fee.
/Annie M. Noble/
Examining Attorney
Law Office 109
(571) 272-3272
annie.noble@uspto.gov
TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.
All informal e-mail communications relevant to this application will be placed in the official application record.
WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.
PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.
TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.