Response to Office Action

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 07/31/2017)

---

Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number. PTO Form 1957 (Rev 10/2011)

OMB No. 0651-0050 (Exp 07/31/2017)

Response to Office Action

To the Commissioner for Trademarks:

Application serial no. 86666953 HIETA TECHNOLOGIES (Stylized and/or with Design, see http://tmng-al.gov.uspto.report/resting2/api/img/86666953/large) has been amended as follows:

CLASSIFICATION AND LISTING OF GOODS/SERVICES
Applicant hereby deletes the following class of goods/services from the application.
Class 019 for Non-metallic component parts for use in onward manufacture

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 006 for Metallic component parts for use in onward manufacture
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(d), Priority based on foreign filing: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services, and asserts a claim of priority based upon a foreign application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization, and asserts a claim of priority based upon a foreign application. For a certification application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant, and the applicant asserts a claim of priority based upon a foreign application. Claim of priority is based on[ European Community application number 014258818 filed 06/15/2015]. 15 U.S.C.Section 1126(d), as amended.

Proposed:
Tracked Text Description: Metallic component parts for use in onward manufacture; Metallic component parts, namely, metal bars, alloys and alloy powders for use in onward manufactureClass 006 for Metallic component parts, namely, metal bars, alloys and alloy powders for use in onward manufacture
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(d), Priority based on foreign filing:For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services, and asserts a claim of priority based upon a foreign application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization, and asserts a claim of priority based upon a foreign application. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant, and the applicant asserts a claim of priority based upon a foreign application. Claim of priority is based on [ European Community application number 014258818 filed 06/15/2015]. 15 U.S.C.Section 1126(d), as amended.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community registration number 014258818 registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU0-6949136242-122832272_._Certificate_of_Registration__W5424702x7AC2E_.pdf
Converted PDF file(s) ( 9 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3
Foreign Registration-4
Foreign Registration-5
Foreign Registration-6
Foreign Registration-7
Foreign Registration-8
Foreign Registration-9

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 007 for Heat exchangers for use as part of larger machinery; component parts of engines and motors; machine coupling and transmission components; 3D printing machines; machines adapted for use with 3D printing machines; inking apparatus for 3D printing machines; parts and fittings for 3D printing machines
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Based on Foreign Application: Applicant has had a bona fide intention to use the mark in commerce on or in connection with the identified goods and/or services, and will submit a copy of a foreign registration, and translation thereof, if appropriate. 15 U. S.C. Section 1126(d), as amended.

Proposed:
Tracked Text Description: Heat exchangers for use as part of larger machinery; component parts of engines and motors; component parts of engines and motors, namely, manifolds, oil coolers, coolers of electronics, fuel injectors, fuel pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, pistons, exhaust systems, exhaust energy recovery systems, cylinder blocks, cylinder heads; machine coupling and transmission components; machine coupling and transmission components, except for land vehicles; 3D printing machines; machines adapted for use with 3D printing machines; machines adapted for use with 3D printing machines, namely, hydraulic injection molding machines, assembly line machinery, robotically controlled machinery, turbo machinery; inking apparatus for 3D printing machines; parts and fittings for 3D printing machines; component parts for use in engines of land vehicles, aircraft and watercraft namely, manifolds, oil coolers, coolers of electronics, fuel injectors, fuel pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, pistons, exhaust systems, cylinder blocks, cylinder headsClass 007 for Heat exchangers for use as part of larger machinery; component parts of engines and motors, namely, manifolds, oil coolers, coolers of electronics, fuel injectors, fuel pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, pistons, exhaust systems, exhaust energy recovery systems, cylinder blocks, cylinder heads; machine coupling and transmission components, except for land vehicles; 3D printing machines; machines adapted for use with 3D printing machines, namely, hydraulic injection molding machines, assembly line machinery, robotically controlled machinery, turbo machinery; inking apparatus for 3D printing machines; parts and fittings for 3D printing machines; component parts for use in engines of land vehicles, aircraft and watercraft namely, manifolds, oil coolers, coolers of electronics, fuel injectors, fuel pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, pistons, exhaust systems, cylinder blocks, cylinder heads
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(d), Priority based on foreign filing:For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services, and asserts a claim of priority based upon a foreign application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization, and asserts a claim of priority based upon a foreign application. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant, and the applicant asserts a claim of priority based upon a foreign application. Claim of priority is based on [ European Community application number 014258818 filed 06/15/2015]. 15 U.S.C.Section 1126(d), as amended.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community registration number 014258818 registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU1-6949136242-122832272_._Certificate_of_Registration__W5424702x7AC2E_.pdf
Converted PDF file(s) ( 9 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3
Foreign Registration-4
Foreign Registration-5
Foreign Registration-6
Foreign Registration-7
Foreign Registration-8
Foreign Registration-9

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 012 for Component body parts for land vehicles, aircraft and watercraft; component parts for use in engines of land vehicles, aircraft and watercraft
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Based on Foreign Application: Applicant has had a bona fide intention to use the mark in commerce on or in connection with the identified goods and/or services, and will submit a copy of a foreign registration, and translation thereof, if appropriate. 15 U. S.C. Section 1126(d), as amended.

Proposed:
Tracked Text Description: Component body parts for land vehicles, aircraft and watercraft; component parts for use in engines of land vehicles, aircraft and watercraft; land vehicle transmission replacement partsClass 012 for Component body parts for land vehicles, aircraft and watercraft; land vehicle transmission replacement parts
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(d), Priority based on foreign filing:For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services, and asserts a claim of priority based upon a foreign application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization, and asserts a claim of priority based upon a foreign application. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant, and the applicant asserts a claim of priority based upon a foreign application. Claim of priority is based on [ European Community application number 014258818 filed 06/15/2015]. 15 U.S.C.Section 1126(d), as amended.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community registration number 014258818 registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU2-6949136242-122832272_._Certificate_of_Registration__W5424702x7AC2E_.pdf
Converted PDF file(s) ( 9 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3
Foreign Registration-4
Foreign Registration-5
Foreign Registration-6
Foreign Registration-7
Foreign Registration-8
Foreign Registration-9

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 016 for 2D and 3D drawings and plans generated by computer aided design
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Based on Foreign Application: Applicant has had a bona fide intention to use the mark in commerce on or in connection with the identified goods and/or services, and will submit a copy of a foreign registration, and translation thereof, if appropriate. 15 U. S.C. Section 1126(d), as amended.

Proposed:
Tracked Text Description: 2D and 3D drawings and plans generated by computer aided design; 2D and 3D drawings and printed plans generated by computer aided designClass 016 for 2D and 3D drawings and printed plans generated by computer aided design
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(d), Priority based on foreign filing:For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services, and asserts a claim of priority based upon a foreign application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization, and asserts a claim of priority based upon a foreign application. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant, and the applicant asserts a claim of priority based upon a foreign application. Claim of priority is based on [ European Community application number 014258818 filed 06/15/2015]. 15 U.S.C.Section 1126(d), as amended.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community registration number 014258818 registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU3-6949136242-122832272_._Certificate_of_Registration__W5424702x7AC2E_.pdf
Converted PDF file(s) ( 9 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3
Foreign Registration-4
Foreign Registration-5
Foreign Registration-6
Foreign Registration-7
Foreign Registration-8
Foreign Registration-9

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 040 for Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing services; Additive manufacturing
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Based on Foreign Application: Applicant has had a bona fide intention to use the mark in commerce on or in connection with the identified goods and/or services, and will submit a copy of a foreign registration, and translation thereof, if appropriate. 15 U. S.C. Section 1126(d), as amended.

Proposed:
Tracked Text Description: Provision of 3D printing services that create scale models and prototypes for others; Section 44(e) only: Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing services; Additive manufacturing; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing¶
¶
Section 1(b) only: additive manufacturingClass 040 for Section 44(e) only: Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing services; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing Section 1(b) only: additive manufacturing
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Filing Basis: Section 44(d), Priority based on foreign filing:For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services, and asserts a claim of priority based upon a foreign application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization, and asserts a claim of priority based upon a foreign application. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant, and the applicant asserts a claim of priority based upon a foreign application. Claim of priority is based on [ European Community application number 014258818 filed 06/15/2015]. 15 U.S.C.Section 1126(d), as amended.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community registration number 014258818 registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU5-6949136242-122832272_._Certificate_of_Registration__W5424702x7AC2E_.pdf
Converted PDF file(s) ( 9 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3
Foreign Registration-4
Foreign Registration-5
Foreign Registration-6
Foreign Registration-7
Foreign Registration-8
Foreign Registration-9

Applicant proposes to amend the following class of goods/services in the application:
Current: Class 042 for Design services for creating 2D and 3D images; design services relating to 3D printing; design of printed matter relating to 3D printing to enable the creation of physical models and accurate scale prototypes; design services for converting 3D drawings to 3D prints and scale models; design consultation services; product testing services; provision of specialist analysis and consultation services
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services in the application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that meet the certification standards of the applicant.

Based on Foreign Application: Applicant has had a bona fide intention to use the mark in commerce on or in connection with the identified goods and/or services, and will submit a copy of a foreign registration, and translation thereof, if appropriate. 15 U. S.C. Section 1126(d), as amended.

Proposed:
Tracked Text Description: Design services for creating 2D and 3D images; Graphic design services for creating 2D and 3D images; design services relating to 3D printing; graphic design services relating to 3D printing; design of printed matter relating to 3D printing to enable the creation of physical models and accurate scale prototypes; graphic design of printed matter relating to 3D printing to enable the creation of physical models and accurate scale prototypes; design services for converting 3D drawings to 3D prints and scale models; graphic design services for converting 3D drawings to 3D prints and scale models; design consultation services; design consultation services in the field of software design, combustion engine design, heat exchanger design, component light weighting; product testing services; provision of specialist analysis and consultation services; provision of specialist analysis and consultation services in the field of graphic design, software design, combustion engine design, heat exchanger design, component light weightingClass 042 for Graphic design services for creating 2D and 3D images; graphic design services relating to 3D printing; graphic design of printed matter relating to 3D printing to enable the creation of physical models and accurate scale prototypes; graphic design services for converting 3D drawings to 3D prints and scale models; design consultation services in the field of software design, combustion engine design, heat exchanger design, component light weighting; product testing services; provision of specialist analysis and consultation services in the field of graphic design, software design, combustion engine design, heat exchanger design, component light weighting
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(d), Priority based on foreign filing:For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services, and asserts a claim of priority based upon a foreign application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization, and asserts a claim of priority based upon a foreign application. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant, and the applicant asserts a claim of priority based upon a foreign application. Claim of priority is based on [ European Community application number 014258818 filed 06/15/2015]. 15 U.S.C.Section 1126(d), as amended.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.

Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community registration number 014258818 registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate. For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Original PDF file:
FRU6-6949136242-122832272_._Certificate_of_Registration__W5424702x7AC2E_.pdf
Converted PDF file(s) ( 9 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3
Foreign Registration-4
Foreign Registration-5
Foreign Registration-6
Foreign Registration-7
Foreign Registration-8
Foreign Registration-9

Applicant hereby adds the following class of goods/services to the application:
New: Class 017 (Original Class: 019 ) for Non-metallic component parts, namely, plastics and nano-composite polymer compounds in extruded, powder and pellet form for use in onward manufacture
Filing Basis: Section 44(d), Priority based on foreign filing:For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services, and asserts a claim of priority based upon a foreign application. For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization, and asserts a claim of priority based upon a foreign application. For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant, and the applicant asserts a claim of priority based upon a foreign application. Claim of priority is based on [ European Community application number 014258818 filed 06/15/2015]. 15 U.S.C.Section 1126(d), as amended.
INTENT TO PERFECT 44(d) : At this time, the applicant intends to rely on Section 44(e) as a basis for registration. If ultimately the applicant does not rely on Section 44(e) as a basis for registration, a valid claim of priority may be retained.

Filing Basis: Section 44(e),Based on Foreign Registration: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods and /or services, and submits a copy of [ European Community registration number 014258818 registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate. 15 U.S.C. Section 1126(e), as amended.
Original PDF file:
FRU4-6949136242-122832272_._Certificate_of_Registration__W5424702x7AC2E_.pdf
Converted PDF file(s) ( 9 pages)
Foreign Registration-1
Foreign Registration-2
Foreign Registration-3
Foreign Registration-4
Foreign Registration-5
Foreign Registration-6
Foreign Registration-7
Foreign Registration-8
Foreign Registration-9

ADDITIONAL STATEMENTS
Disclaimer
No claim is made to the exclusive right to use TECHNOLOGIES apart from the mark as shown.


Description of mark
The mark consists of the word "HiETA", with the letters "Hi" in gray and "ETA" in blue, to the left of a blue circle with a black outline and a black letter "n" representing the Greek lowercase letter eta in the middle of the circle, and the word "technologies" in gray under the letters "ETA.

Significance of wording, letter(s), or numeral(s)
"HIGH ETA" and "HI ETA" appearing in the mark has no significance nor is it a term of art in the relevant trade or industry or as used in connection with the goods/services/collective membership organization listed in the application, or any geographical significance.


Miscellaneous Statement
The wording HI is derived from the word HIGH and ETA is derived from the Greek letter "eta". In engineering, the Greek letter "eta" is the basic term for efficiency. The combination of these two words HIGH and ETA means "high efficiency". For Class 40, Applicant is deleting the Section 1(b) basis and amending the basis to Section 44(e) for the following goods only: "Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing services; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing." For the Class 40 goods "additive manufacturing," Applicant is maintaining the Section 1(b) basis, and Section 44(e) does not apply.


SIGNATURE(S)
Declaration Signature
Original PDF file:
HS_6949136242-161254851_._Verified_Statement__W5423862x7AC2E_.pdf
Converted PDF file(s) (1 page)
Signature File1
Signatory's Name: D. Hislop
Signatory's Position: Director

Response Signature
Signature: /Jonathan M. Gelchinsky/     Date: 03/22/2016
Signatory's Name: Jonathan M. Gelchinsky
Signatory's Position: Attorney of Record, Maine Bar Member

Signatory's Phone Number: 207-791-1100

The signatory has confirmed that he/she is an attorney who is a member in good standing of the bar of the highest court of a U.S. state, which includes the District of Columbia, Puerto Rico, and other federal territories and possessions; and he/she is currently the owner's/holder's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S. attorney or a Canadian attorney/agent not currently associated with his/her company/firm previously represented the owner/holder in this matter: (1) the owner/holder has filed or is concurrently filing a signed revocation of or substitute power of attorney with the USPTO; (2) the USPTO has granted the request of the prior representative to withdraw; (3) the owner/holder has filed a power of attorney appointing him/her in this matter; or (4) the owner's/holder's appointed U.S. attorney or Canadian attorney/agent has filed a power of attorney appointing him/her as an associate attorney in this matter.

        
Serial Number: 86666953
Internet Transmission Date: Tue Mar 22 16:40:32 EDT 2016
TEAS Stamp: USPTO/ROA-XX.XX.XXX.XXX-2016032216403255
3874-86666953-550cf1db1ccd5de4492bca6bd3
fff8c79cc4ecd18ce9dbc397b377fa26227884c0
-N/A-N/A-20160322161254851892