Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1771 (Rev 10/2011) |
OMB No. 0651-0050 (Exp 07/31/2017) |
Post-Approval/Publication/Post-Notice of Allowance (NOA) Amendment
The table below presents the data as entered.
Input Field
|
Entered
|
SERIAL NUMBER |
86666953 |
LAW OFFICE ASSIGNED |
LAW OFFICE 117 |
MARK SECTION |
MARK FILE NAME |
http://uspto.report/TM/86666953/mark.png |
LITERAL ELEMENT |
HIETA TECHNOLOGIES |
STANDARD CHARACTERS |
NO |
USPTO-GENERATED IMAGE |
NO |
EXPLANATION OF FILING |
Applicant is deleting the services (additive manufacturing) from Class 40. The remaining services in Class 40 (Provision of 3D printing services that create scale
models and prototypes for others; provision of digital printing services; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital
printing) are based solely on Section 44(e), and are thus unaffected by this amendment.
Classes 06, 07, 09, 12, 16, 17, and 42 remain based solely on Section 44(e), and are unaffected by this amendment.
With the foregoing deletion of the services based on Section 1(b), applicant respectfully requests that the Notice of Allowance be withdrawn from this application, in order to allow
the remaining goods and services under Section 44(e) to proceed to registration.
|
GOODS AND/OR SERVICES SECTION (006)(current) |
INTERNATIONAL CLASS |
006 |
DESCRIPTION |
Metallic component parts, namely, metal bars, alloys and alloy powders for use in onward manufacture |
FILING BASIS |
Section 1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (006)(proposed) |
INTERNATIONAL CLASS |
006 |
DESCRIPTION |
Metallic component parts, namely, metal bars, alloys and alloy powders for use in onward manufacture |
DELETED FILING BASIS |
1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (007)(current) |
INTERNATIONAL CLASS |
007 |
DESCRIPTION |
Heat exchangers for use as part of larger machinery; component parts of engines and motors, namely, manifolds, oil coolers, fuel
injectors, fuel pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, exhaust energy recovery systems comprised of exhaust
manifold, heat exchanger, turbo-compressor, turbo-expander, water condenser, gas-water separator, electricity generator, and drive to main powertrain, cylinder blocks, cylinder heads; machine
coupling and transmission components, except for land vehicles; 3D printing machines; machines adapted for use with 3D printing machines, namely, hydraulic injection molding machines, assembly line
conveyor machinery, industrial robots, turbo machinery in the nature of electricity generators powered by turbines, micro-turbines, turbo-compressors, turbo-expanders; inking apparatus for 3D
printing machines; parts and fittings for 3D printing machines; component parts for use in engines of land vehicles, aircraft and watercraft namely, manifolds, oil coolers, fuel injectors, fuel
pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, cylinder blocks, cylinder heads |
FILING BASIS |
Section 1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (007)(proposed) |
INTERNATIONAL CLASS |
007 |
DESCRIPTION |
Heat exchangers for use as part of larger machinery; component parts of engines and motors, namely, manifolds, oil coolers, fuel
injectors, fuel pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, exhaust energy recovery systems comprised of exhaust
manifold, heat exchanger, turbo-compressor, turbo-expander, water condenser, gas-water separator, electricity generator, and drive to main powertrain, cylinder blocks, cylinder heads; machine
coupling and transmission components, except for land vehicles; 3D printing machines; machines adapted for use with 3D printing machines, namely, hydraulic injection molding machines, assembly line
conveyor machinery, industrial robots, turbo machinery in the nature of electricity generators powered by turbines, micro-turbines, turbo-compressors, turbo-expanders; inking apparatus for 3D
printing machines; parts and fittings for 3D printing machines; component parts for use in engines of land vehicles, aircraft and watercraft namely, manifolds, oil coolers, fuel injectors, fuel
pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, cylinder blocks, cylinder heads |
DELETED FILING BASIS |
1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (009)(current) |
INTERNATIONAL CLASS |
009 |
DESCRIPTION |
Coolers for electronic controls for gasoline engines for land vehicles, aircraft and watercraft |
FILING BASIS |
Section 1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (009)(proposed) |
INTERNATIONAL CLASS |
009 |
DESCRIPTION |
Coolers for electronic controls for gasoline engines for land vehicles, aircraft and watercraft |
DELETED FILING BASIS |
1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (012)(current) |
INTERNATIONAL CLASS |
012 |
DESCRIPTION |
Component body parts for land vehicles, aircraft and watercraft; land vehicle transmission replacement parts |
FILING BASIS |
Section 1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (012)(proposed) |
INTERNATIONAL CLASS |
012 |
DESCRIPTION |
Component body parts for land vehicles, aircraft and watercraft; land vehicle transmission replacement parts |
DELETED FILING BASIS |
1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (016)(current) |
INTERNATIONAL CLASS |
016 |
DESCRIPTION |
2D and 3D drawings and printed plans generated by computer aided design |
FILING BASIS |
Section 1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (016)(proposed) |
INTERNATIONAL CLASS |
016 |
DESCRIPTION |
2D and 3D drawings and printed plans generated by computer aided design |
DELETED FILING BASIS |
1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (017)(current) |
INTERNATIONAL CLASS |
017 |
DESCRIPTION |
Non-metallic component parts, namely, plastics and nano-composite polymer compounds in extruded, powder and pellet form for use in
onward manufacture |
FILING BASIS |
Section 1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (017)(proposed) |
INTERNATIONAL CLASS |
017 |
DESCRIPTION |
Non-metallic component parts, namely, plastics and nano-composite polymer compounds in extruded, powder and pellet form for use in
onward manufacture |
DELETED FILING BASIS |
1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (040)(current) |
INTERNATIONAL CLASS |
040 |
DESCRIPTION |
(Based on 44(e)) Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing
services; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing (Based on Intent to Use) additive manufacturing |
FILING BASIS |
Section 1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (040)(proposed) |
INTERNATIONAL CLASS |
040 |
TRACKED TEXT DESCRIPTION |
(Based on 44(e)) Provision of 3D printing services that create scale models and prototypes for
others; Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing
services; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing (Based on Intent to
Use) additive manufacturing; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital
printing |
FINAL DESCRIPTION |
Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing services; provision
of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing |
DELETED FILING BASIS |
1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (042)(current) |
INTERNATIONAL CLASS |
042 |
DESCRIPTION |
Graphic design services for creating 2D and 3D images; graphic design services relating to 3D printing; graphic design of printed
matter relating to 3D printing to enable the creation of physical models and accurate scale prototypes; graphic design services for converting 3D drawings to 3D prints and scale models; design
consultation services in the field of software design, combustion engine design, heat exchanger design, component light weighting; product testing services; provision of specialist analysis and
consultation services in the field of graphic design, software design, combustion engine design, heat exchanger design, component light weighting |
FILING BASIS |
Section 1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
GOODS AND/OR SERVICES SECTION (042)(proposed) |
INTERNATIONAL CLASS |
042 |
DESCRIPTION |
Graphic design services for creating 2D and 3D images; graphic design services relating to 3D printing; graphic design of printed
matter relating to 3D printing to enable the creation of physical models and accurate scale prototypes; graphic design services for converting 3D drawings to 3D prints and scale models; design
consultation services in the field of software design, combustion engine design, heat exchanger design, component light weighting; product testing services; provision of specialist analysis and
consultation services in the field of graphic design, software design, combustion engine design, heat exchanger design, component light weighting |
DELETED FILING BASIS |
1(b) |
FILING BASIS |
Section 44(e) |
FOREIGN REGISTRATION NUMBER |
014258818 |
FOREIGN REGISTRATION
COUNTRY |
European Community - CTM |
FOREIGN REGISTRATION
DATE |
12/22/2015 |
FOREIGN EXPIRATION DATE |
06/15/2025 |
SIGNATURE SECTION |
DECLARATION SIGNATURE |
The filing Attorney has elected not to submit the signed declaration, believing no supporting declaration is required under the Trademark
Rules of Practice. |
RESPONSE SIGNATURE |
/Jonathan M. Gelchinsky/ |
SIGNATORY'S NAME |
Jonathan M. Gelchinsky |
SIGNATORY'S POSITION |
Attorney of Record, Maine Bar Member |
SIGNATORY'S PHONE NUMBER |
207-791-1100 |
DATE SIGNED |
01/06/2017 |
AUTHORIZED SIGNATORY |
YES |
FILING INFORMATION SECTION |
SUBMIT DATE |
Fri Jan 06 14:12:52 EST 2017 |
TEAS STAMP |
USPTO/PPA-XX.XX.XXX.XXX-2
0170106141252587558-86666
953-570bd20f5e36cb8e33cbc
44de08c495ddb45d72af892e5
b1752de11318cd48ff4-N/A-N
/A-20170106135117334333 |
Under the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless it displays a valid OMB control number.
PTO Form 1771 (Rev 10/2011) |
OMB No. 0651-0050 (Exp 07/31/2017) |
Post-Approval/Publication/Post-Notice of Allowance (NOA) Amendment
To the Commissioner for Trademarks:
Application serial no.
86666953 HIETA TECHNOLOGIES (Stylized and/or with Design, see http://uspto.report/TM/86666953/mark.png) has been amended as follows:
EXPLANATION OF FILING
Applicant is deleting the services (additive manufacturing) from Class 40. The remaining services in Class 40 (Provision of 3D printing services that create scale
models and prototypes for others; provision of digital printing services; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital
printing) are based solely on Section 44(e), and are thus unaffected by this amendment.
Classes 06, 07, 09, 12, 16, 17, and 42 remain based solely on Section 44(e), and are unaffected by this amendment.
With the foregoing deletion of the services based on Section 1(b), applicant respectfully requests that the Notice of Allowance be withdrawn from this application, in order to allow
the remaining goods and services under Section 44(e) to proceed to registration.
CLASSIFICATION AND LISTING OF GOODS/SERVICES
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 006 for Metallic component parts, namely, metal bars, alloys and alloy powders for use in onward manufacture
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate.
For a trademark or service mark application: As
of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services.
For a collective
trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise
legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization.
For a certification mark
application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized
users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise
or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Proposed: Class 006 for Metallic component parts, namely, metal bars, alloys and alloy powders for use in onward manufacture
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate, before the application may proceed to registration.
For
a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the
identified goods/services.
For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona
fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership
organization.
For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the
use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which
the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 007 for Heat exchangers for use as part of larger machinery; component parts of engines and motors, namely, manifolds, oil coolers, fuel injectors, fuel pumps, pistons, valves,
crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, exhaust energy recovery systems comprised of exhaust manifold, heat exchanger,
turbo-compressor, turbo-expander, water condenser, gas-water separator, electricity generator, and drive to main powertrain, cylinder blocks, cylinder heads; machine coupling and transmission
components, except for land vehicles; 3D printing machines; machines adapted for use with 3D printing machines, namely, hydraulic injection molding machines, assembly line conveyor machinery,
industrial robots, turbo machinery in the nature of electricity generators powered by turbines, micro-turbines, turbo-compressors, turbo-expanders; inking apparatus for 3D printing machines; parts
and fittings for 3D printing machines; component parts for use in engines of land vehicles, aircraft and watercraft namely, manifolds, oil coolers, fuel injectors, fuel pumps, pistons, valves,
crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, cylinder blocks, cylinder heads
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate.
For a trademark or service mark application: As
of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services.
For a collective
trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise
legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization.
For a certification mark
application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized
users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise
or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Proposed: Class 007 for Heat exchangers for use as part of larger machinery; component parts of engines and motors, namely, manifolds, oil coolers, fuel injectors, fuel pumps, pistons, valves,
crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, exhaust energy recovery systems comprised of exhaust manifold, heat exchanger,
turbo-compressor, turbo-expander, water condenser, gas-water separator, electricity generator, and drive to main powertrain, cylinder blocks, cylinder heads; machine coupling and transmission
components, except for land vehicles; 3D printing machines; machines adapted for use with 3D printing machines, namely, hydraulic injection molding machines, assembly line conveyor machinery,
industrial robots, turbo machinery in the nature of electricity generators powered by turbines, micro-turbines, turbo-compressors, turbo-expanders; inking apparatus for 3D printing machines; parts
and fittings for 3D printing machines; component parts for use in engines of land vehicles, aircraft and watercraft namely, manifolds, oil coolers, fuel injectors, fuel pumps, pistons, valves,
crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, cylinder blocks, cylinder heads
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate, before the application may proceed to registration.
For
a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the
identified goods/services.
For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona
fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership
organization.
For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the
use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which
the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 009 for Coolers for electronic controls for gasoline engines for land vehicles, aircraft and watercraft
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate.
For a trademark or service mark application: As
of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services.
For a collective
trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise
legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization.
For a certification mark
application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized
users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise
or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Proposed: Class 009 for Coolers for electronic controls for gasoline engines for land vehicles, aircraft and watercraft
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate, before the application may proceed to registration.
For
a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the
identified goods/services.
For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona
fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership
organization.
For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the
use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which
the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 012 for Component body parts for land vehicles, aircraft and watercraft; land vehicle transmission replacement parts
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate.
For a trademark or service mark application: As
of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services.
For a collective
trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise
legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization.
For a certification mark
application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized
users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise
or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Proposed: Class 012 for Component body parts for land vehicles, aircraft and watercraft; land vehicle transmission replacement parts
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate, before the application may proceed to registration.
For
a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the
identified goods/services.
For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona
fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership
organization.
For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the
use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which
the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 016 for 2D and 3D drawings and printed plans generated by computer aided design
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate.
For a trademark or service mark application: As
of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services.
For a collective
trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise
legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization.
For a certification mark
application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized
users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise
or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Proposed: Class 016 for 2D and 3D drawings and printed plans generated by computer aided design
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate, before the application may proceed to registration.
For
a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the
identified goods/services.
For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona
fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership
organization.
For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the
use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which
the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 017 for Non-metallic component parts, namely, plastics and nano-composite polymer compounds in extruded, powder and pellet form for use in onward manufacture
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate.
For a trademark or service mark application: As
of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services.
For a collective
trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise
legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization.
For a certification mark
application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized
users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise
or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Proposed: Class 017 for Non-metallic component parts, namely, plastics and nano-composite polymer compounds in extruded, powder and pellet form for use in onward manufacture
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate, before the application may proceed to registration.
For
a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the
identified goods/services.
For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona
fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership
organization.
For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the
use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which
the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 040 for (Based on 44(e)) Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing services; provision of specialist
analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing (Based on Intent to Use) additive manufacturing
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate.
For a trademark or service mark application: As
of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services.
For a collective
trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise
legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization.
For a certification mark
application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized
users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise
or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Proposed:
Tracked Text Description: (Based on 44(e)) Provision of 3D printing services that create scale models and prototypes for others;
Provision of 3D printing services that create scale models and prototypes for others;
provision of digital printing services;
provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing (Based on Intent to Use) additive manufacturing;
provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printingClass 040 for Provision of 3D
printing services that create scale models and prototypes for others; provision of digital printing services; provision of specialist analysis and consultation services in the field of additive
manufacturing, 3D printing, digital printing
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate, before the application may proceed to registration.
For
a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the
identified goods/services.
For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona
fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership
organization.
For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the
use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which
the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Applicant proposes to amend the following class of goods/services in the application:
Current: Class 042 for Graphic design services for creating 2D and 3D images; graphic design services relating to 3D printing; graphic design of printed matter relating to 3D printing to
enable the creation of physical models and accurate scale prototypes; graphic design services for converting 3D drawings to 3D prints and scale models; design consultation services in the field of
software design, combustion engine design, heat exchanger design, component light weighting; product testing services; provision of specialist analysis and consultation services in the field of
graphic design, software design, combustion engine design, heat exchanger design, component light weighting
Original Filing Basis:
Filing Basis: Section 1(b), Intent to Use: For a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was
entitled, to use the mark in commerce on or in connection with the identified goods/services in the application.
For a collective trademark, collective service mark, or collective membership
mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members
on or in connection with the identified goods/services/collective membership organization.
For a certification mark application: As of the application filing date, the applicant had a
bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized users in connection with the identified goods/services, and the applicant will
not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise or promote recognition of the certification program or of the goods/services that
meet the certification standards of the applicant.
Filing Basis: Section 44(e), Based on Foreign Registration: For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate.
For a trademark or service mark application: As
of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the identified goods/services.
For a collective
trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise
legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership organization.
For a certification mark
application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by authorized
users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which the mark is applied, except to advertise
or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
Proposed: Class 042 for Graphic design services for creating 2D and 3D images; graphic design services relating to 3D printing; graphic design of printed matter relating to 3D printing to
enable the creation of physical models and accurate scale prototypes; graphic design services for converting 3D drawings to 3D prints and scale models; design consultation services in the field of
software design, combustion engine design, heat exchanger design, component light weighting; product testing services; provision of specialist analysis and consultation services in the field of
graphic design, software design, combustion engine design, heat exchanger design, component light weighting
Deleted Filing Basis: 1(b)
Filing Basis: Section 44(e), Based on Foreign Registration:For all applications: The applicant attaches a copy of [ European Community - CTM registration number 014258818
registered 12/22/2015 with a renewal date of __________ and an expiration date of 06/15/2025 ], and translation thereof, if appropriate, before the application may proceed to registration.
For
a trademark or service mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to use the mark in commerce on or in connection with the
identified goods/services.
For a collective trademark, collective service mark, or collective membership mark application: As of the application filing date, the applicant had a bona
fide intention, and was entitled, to exercise legitimate control over the use of the mark in commerce by members on or in connection with the identified goods/services/collective membership
organization.
For a certification mark application: As of the application filing date, the applicant had a bona fide intention, and was entitled, to exercise legitimate control over the
use of the mark in commerce by authorized users on or in connection with the identified goods/services, and the applicant will not engage in the production or marketing of the goods/services to which
the mark is applied, except to advertise or promote recognition of the certification program or of the goods or services that meet the certification standards of the applicant.
SIGNATURE(S)
Declaration Signature
The filing Attorney has elected not to submit the signed declaration, believing no supporting declaration is required under the
Trademark Rules of Practice.
Signature: /Jonathan M. Gelchinsky/ Date: 01/06/2017
Signatory's Name: Jonathan M. Gelchinsky
Signatory's Position: Attorney of Record, Maine Bar Member
Signatory's Phone Number: 207-791-1100
The signatory has confirmed that he/she is an attorney who is a member in good standing of the bar of the highest court of a U.S. state, which includes the District of Columbia, Puerto Rico, and
other federal territories and possessions; and he/she is currently the applicant's attorney or an associate thereof; and to the best of his/her knowledge, if prior to his/her appointment another U.S.
attorney or a Canadian attorney/agent not currently associated with his/her company/firm previously represented the applicant in this matter: (1) the owner/holder has filed or is concurrently filing
a signed revocation of or substitute power of attorney with the USPTO; (2) the USPTO has granted the request of the prior representative to withdraw; (3) the owner/holder has filed a power of
attorney appointing him/her in this matter; or (4) the owner's/holder's appointed U.S. attorney or Canadian attorney/agent has filed a power of attorney appointing him/her as an associate attorney in
this matter.
Serial Number: 86666953
Internet Transmission Date: Fri Jan 06 14:12:52 EST 2017
TEAS Stamp: USPTO/PPA-XX.XX.XXX.XXX-2017010614125258
7558-86666953-570bd20f5e36cb8e33cbc44de0
8c495ddb45d72af892e5b1752de11318cd48ff4-
N/A-N/A-20170106135117334333