Notice of Allowance

HIETA TECHNOLOGIES

HiETA Technologies Ltd

Official USPTO Notice of Allowance: U.S. Trademark SN 86666953: HIETA TECHNOLOGIES (Stylized/Design): Docket/Reference No. 33158/3001


From: TMOfficialNotices@USPTO.GOV
Sent: Tuesday, December 20, 2016 00:04 AM
To: trademark@pierceatwood.com
Subject: Official USPTO Notice of Allowance: U.S. Trademark SN 86666953: HIETA TECHNOLOGIES (Stylized/Design): Docket/Reference No. 33158/3001



NOTICE OF ALLOWANCE (NOA)

ISSUE DATE: Dec 20, 2016

Serial Number:   86666953
Mark:   HIETA TECHNOLOGIES (Stylized/Design)
Docket/Reference Number:  33158/3001

No opposition was filed for this published application.  The issue date of this NOA establishes the due date for the filing of a Statement of Use (SOU) or a Request for Extension of Time to file a Statement of Use (Extension Request).  WARNING: An SOU that meets all legal requirements must be filed before a registration certificate can issue.  Please read below for important information regarding the applicant's pending six (6) month deadline.

SIX (6)-MONTH DEADLINE: Applicant has six (6) MONTHS from the NOA issue date to file either:
   - An SOU, if the applicant is using the mark in commerce (required even if the applicant was using the mark at the time of filing the application, if use basis was not specified originally);  OR
   - An Extension Request, if the applicant is not yet using the mark in commerce.  If an Extension Request is filed, a new request must be filed every six (6) months until the SOU is filed.  The applicant may file a total of five (5) extension requests.  WARNING: An SOU may not be filed more than thirty-six (36) months from when the NOA issued.  The deadline for filing is always calculated from the issue date of the NOA.

How to file SOU and/or Extension Request:
Use the Trademark Electronic Application System (TEAS).  Do NOT reply to this e-mail, as e-mailed filings will NOT be processed.  Both the SOU and Extension Request have many legal requirements, including fees and verified statements; therefore, please use the USPTO forms available online at http://www.gov.uspto.report/teas/index.html (under the "INTENT-TO-USE (ITU) FORMS" category) to avoid the possible omission of required information.  If you have questions about this notice, please contact the Trademark Assistance Center at 1-800-786-9199.

For information on how to (1) divide an application; (2) delete goods/services (or entire class) with a Section 1(b) basis; or (3) change filing basis, see http://www.gov.uspto.report/trademarks/basics/MoreInfo_SOU_EXT.jsp.

FAILURE TO FILE A REQUIRED DOCUMENT OUTLINED ABOVE DURING THE APPROPRIATE TIME PERIOD WILL RESULT IN THE ABANDONMENT OF THIS APPLICATION.

REVIEW APPLICATION INFORMATION FOR ACCURACY

If you believe this NOA should not have issued or correction of the information shown below is needed, you must submit a request to the Intent-to-Use Unit.  Please use the "Post-Publication Amendment" form under the "POST-PUBLICATION/POST NOTICE OF ALLOWANCE (NOA) FORMS" category, available at http://www.gov.uspto.report/teas/index.html.  Do NOT reply to this e-mail, as e-mailed filings will NOT be processed.

Serial Number: 86666953
Mark: HIETA TECHNOLOGIES (Stylized/Design)
Docket/Reference Number: 33158/3001
Owner: HiETA Technologies Ltd
Dirac Crescent Emersons Green
Bristol & Bath Science Park
Bristol , UNITED KINGDOM   BS167FR

Correspondence Address: JONATHAN M. GELCHINSKY
Pierce Atwood Llp
254 Commercial St
Portland, ME 04101-4664


This application has the following bases, but not necessarily for all listed goods/services:
Section 1(a): NO Section 1(b): YES Section 44(e): YES

GOODS/SERVICES BY INTERNATIONAL CLASS

006 - Metallic component parts, namely, metal bars, alloys and alloy powders for use in onward manufacture -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE
007 - Heat exchangers for use as part of larger machinery; component parts of engines and motors, namely, manifolds, oil coolers, fuel injectors, fuel pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, exhaust energy recovery systems comprised of exhaust manifold, heat exchanger, turbo-compressor, turbo-expander, water condenser, gas-water separator, electricity generator, and drive to main powertrain, cylinder blocks, cylinder heads; machine coupling and transmission components, except for land vehicles; 3D printing machines; machines adapted for use with 3D printing machines, namely, hydraulic injection molding machines, assembly line conveyor machinery, industrial robots, turbo machinery in the nature of electricity generators powered by turbines, micro-turbines, turbo-compressors, turbo-expanders; inking apparatus for 3D printing machines; parts and fittings for 3D printing machines; component parts for use in engines of land vehicles, aircraft and watercraft namely, manifolds, oil coolers, fuel injectors, fuel pumps, pistons, valves, crankshafts, crankpins, camshafts, flywheels, exhaust systems comprised of pipes, collector and muffler, cylinder blocks, cylinder heads -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE
009 - Coolers for electronic controls for gasoline engines for land vehicles, aircraft and watercraft -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE
012 - Component body parts for land vehicles, aircraft and watercraft; land vehicle transmission replacement parts -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE
016 - 2D and 3D drawings and printed plans generated by computer aided design -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE
017 - Non-metallic component parts, namely, plastics and nano-composite polymer compounds in extruded, powder and pellet form for use in onward manufacture -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE
040 - (Based on 44(e)) Provision of 3D printing services that create scale models and prototypes for others; provision of digital printing services; provision of specialist analysis and consultation services in the field of additive manufacturing, 3D printing, digital printing (Based on Intent to Use) additive manufacturing -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE
042 - Graphic design services for creating 2D and 3D images; graphic design services relating to 3D printing; graphic design of printed matter relating to 3D printing to enable the creation of physical models and accurate scale prototypes; graphic design services for converting 3D drawings to 3D prints and scale models; design consultation services in the field of software design, combustion engine design, heat exchanger design, component light weighting; product testing services; provision of specialist analysis and consultation services in the field of graphic design, software design, combustion engine design, heat exchanger design, component light weighting -- FIRST USE DATE: NONE; -- USE IN COMMERCE DATE: NONE

ALL OF THE GOODS/SERVICES IN EACH CLASS ARE LISTED.




Fraudulent statements may result in registration being cancelled: Applicants must ensure that statements made in filings to the USPTO are accurate, as inaccuracies may result in the cancellation of any issued trademark registration.  The lack of a bona fide intention to use the mark with ALL goods and/or services listed in an application or the lack of actual use on all goods and/or services for which use is claimed could jeopardize the validity of the registration, possibly resulting in its cancellation.

Additional information: For information on filing and maintenance requirements for U.S. trademark applications and registrations and required fees, please consult the USPTO website at www.uspto.gov or call the Trademark Assistance Center at 1-800-786-9199.

Checking status: To check the status of an application, go to http://tarr.uspto.gov.  Please check the status of any application at least every three (3) months after the application filing date.

To view this notice and other documents for this application on-line, go to http://tdr.gov.uspto.report/search.action?sn=86666953.  NOTE: This notice will only be available on-line the next business day after receipt of this e-mail.

uspto.report is an independent third-party trademark research tool that is not affiliated, endorsed, or sponsored by the United States Patent and Trademark Office (USPTO) or any other governmental organization. The information provided by uspto.report is based on publicly available data at the time of writing and is intended for informational purposes only.

While we strive to provide accurate and up-to-date information, we do not guarantee the accuracy, completeness, reliability, or suitability of the information displayed on this site. The use of this site is at your own risk. Any reliance you place on such information is therefore strictly at your own risk.

All official trademark data, including owner information, should be verified by visiting the official USPTO website at www.uspto.gov. This site is not intended to replace professional legal advice and should not be used as a substitute for consulting with a legal professional who is knowledgeable about trademark law.

© 2024 USPTO.report | Privacy Policy | Resources | RSS Feed of Trademarks | Trademark Filings Twitter Feed