TEAS Plus New Application

PTO Form 1478 (Rev 9/2006)

OMB No. 0651-0009 (Exp 02/28/2018)

---

PTO Form 1478 (Rev 9/2006)

OMB No. 0651-0009 (Exp 02/28/2018)

Trademark/Service Mark Application, Principal Register

TEAS Plus Application

Serial Number: 86641109

Filing Date: 05/26/2015

To the Commissioner for Trademarks:

MARK: SWORDFISH (stylized and/or with design, see mark)

The literal element of the mark consists of SWORDFISH.
The applicant is not claiming color as a feature of the mark. The mark consists of Stylized characters "SwordFish" underneath a swordfish enclosed in a circle.
The applicant, SWORDFISH TOOLS INC., a corporation of California, having an address of
      c/o Law Offices of Scott Warmuth,
      17700 CASTLETON ST., SUITE 168
      City of Industry, California 91748
      United States


requests registration of the trademark/service mark identified above in the United States Patent and Trademark Office on the Principal Register established by the Act of July 5, 1946 (15 U.S.C. Section 1051 et seq.), as amended, for the following:

For specific filing basis information for each item, you must view the display within the Input Table.
       International Class 006:  Grease nipples; Metal ball lock pins; Metal bolts; Metal clips for general use; Metal components for metal protective and security window shutters, namely, slats, shutterboxes, side frames, end caps, crank handles, pull straps, side tracks, ball bearings and installation hardware, namely, rollers, rails, cables, carriers, pins, locks, clips, brackets and screws; Metal cotter pins; Metal fuel oil hoses; Metal hardware, namely, washers; Metal hose clamps; Metal hose clips for automotives; Metal hose fittings; Metal key blanks; Metal key chains; Metal key holders; Metal key rings; Metal keys for locks; Metal laminated leaf-springs; Metal locks and keys therefor; Metal nuts; Metal pipe clips; Metal rivets; Metal screws; Metal shackles and hooks for lifting and rigging; Metal shims; Metal staples for construction or industrial use; Nails; Ring-shaped fittings of metal; Rings of metal for keys; Screw rings of metal; Screws of metal



In International Class 006, the mark was first used by the applicant or the applicant's related company or licensee predecessor in interest at least as early as 03/01/2015, and first used in commerce at least as early as 03/01/2015, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) scanned/ digitally photographed tags, labels.
Specimen File1
Specimen File2
Specimen File3

For specific filing basis information for each item, you must view the display within the Input Table.
       International Class 007:  Internal combustion engine parts, namely, piston rings; O-rings being machine parts for automotives; Piston rings; Power drill bits; Springs being parts of machines; Vacuum packing machines; Vacuum pads for vacuum pump machines; Vacuum pumps



In International Class 007, the mark was first used by the applicant or the applicant's related company or licensee predecessor in interest at least as early as 03/01/2015, and first used in commerce at least as early as 03/01/2015, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) scanned/ digitally photographed tags, labels.
Specimen File1
Specimen File2

For specific filing basis information for each item, you must view the display within the Input Table.
       International Class 009:  Adapter plugs; Automotive measuring instruments, namely, water temperature gauges, air fuel/ratio gauges, boost gauges, vacuum gauges and exhaust gas temperature gauges; Electric connectors; Electric plugs; Electrical and electronic connectors; Electrical connector housings; Electrical connectors; Electrical header connectors; Electrical plug device enabling connection and disconnection of power and/or control cables; Electrical plugs; Electrical plugs and sockets; Electrical power connectors; Electrical radio connectors; Electrical voice intracommunications systems comprising control stations, interface modules, frames, controller cards, connectors, power supplies, panels and mountings for use in the production of live musical performances, theatre, and other live events; Fuses for automobiles; Plug adaptors; Plug connectors; Plug-in connectors



In International Class 009, the mark was first used by the applicant or the applicant's related company or licensee predecessor in interest at least as early as 03/01/2015, and first used in commerce at least as early as 03/01/2015, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) scanned/ digitally photographed tags, labels.
Specimen File1

For specific filing basis information for each item, you must view the display within the Input Table.
       International Class 012:  Gas tanks grommets for land vehicles; Land vehicle parts in the nature of wire harnesses, namely, wires, terminals and connectors bundled together to transmit electric power and signals to electric or electronic equipment mounted on the body parts of automobiles; Metal locking device for trailer hitch couplers; Trailer hitch ball covers; Trailer hitch covers; Trailer hitches; Vehicle tow bar connector covers



In International Class 012, the mark was first used by the applicant or the applicant's related company or licensee predecessor in interest at least as early as 03/01/2015, and first used in commerce at least as early as 03/01/2015, and is now in use in such commerce. The applicant is submitting one(or more) specimen(s) showing the mark as used in commerce on or in connection with any item in the class of listed goods/services, consisting of a(n) scanned/ digitally photographed tags, labels.
Specimen File1



For informational purposes only, applicant's website address is: www.mcheniplaw.com
The applicant's current Attorney Information:
      CHEYANG CHEN of Law Offices of Scott Warmuth
      c/o Law Offices of Scott Warmuth
      17700 CASTLETON ST., SUITE 168
      City of Industry, California 91748
      United States

The applicant's current Correspondence Information:

CHEYANG CHEN

Law Offices of Scott Warmuth

c/o Law Offices of Scott Warmuth       17700 CASTLETON ST., SUITE 168

City of Industry, California 91748

6263632190(phone)

6266420808(fax)

chen.patentlaw@gmail.com;mchen@law888.com (authorized) E-mail Authorization: I authorize the USPTO to send e-mail correspondence concerning the application to the applicant or applicant's attorney at the e-mail address provided above. I understand that a valid e-mail address must be maintained and that the applicant or the applicant's attorney must file the relevant subsequent application-related submissions via the Trademark Electronic Application System (TEAS). Failure to do so will result in an additional processing fee of $50 per international class of goods/services.

A fee payment in the amount of $900 has been submitted with the application, representing payment for 4 class(es).

Declaration

The signatory believes that: if the applicant is filing the application under 15 U.S.C. Section 1051(a), the applicant is the owner of the trademark/service mark sought to be registered; the applicant or the applicant's related company or licensee is using the mark in commerce on or in connection with the goods/services in the application, and such use by the applicant's related company or licensee inures to the benefit of the applicant; the specimen(s) shows the mark as used on or in connection with the goods/services in the application; and/or if the applicant filed an application under 15 U.S.C. Section 1051(b), Section 1126(d), and/or Section 1126(e), the applicant is entitled to use the mark in commerce; the applicant has a bona fide intention to use or use through the applicant's related company or licensee the mark in commerce on or in connection with the goods/services in the application. The signatory believes that to the best of the signatory's knowledge and belief, no other person has the right to use the mark in commerce, either in the identical form or in such near resemblance as to be likely, when used on or in connection with the goods/services of such other person, to cause confusion or mistake, or to deceive. The signatory being warned that willful false statements and the like are punishable by fine or imprisonment, or both, under 18 U.S.C. Section 1001, and that such willful false statements and the like may jeopardize the validity of the application or any registration resulting therefrom, declares that all statements made of his/her own knowledge are true and all statements made on information and belief are believed to be true.


Signature: /Che-Yang Chen/   Date Signed: 05/26/2015
Signatory's Name: Che-Yang Chen
Signatory's Position: Patent attorney



RAM Sale Number: 86641109
RAM Accounting Date: 05/27/2015

Serial Number: 86641109
Internet Transmission Date: Tue May 26 15:02:07 EDT 2015
TEAS Stamp: USPTO/FTK-XX.XX.XXX.XXX-2015052615020785
6412-86641109-530d252a279e25f17e06b1854b
d3c6cb12ae7d6d97a53725364cbce15c9a7c2295
f-CC-1577-20150526123438294120