NOTE TO THE FILE
SERIAL NUMBER: 79270415
DATE: 05/07/2020
NAME: vkaplan
NOTE:
Searched:
Lexis/Nexis
OneLook
Wikipedia
Acronym Finder Protest evidence reviewed
Other:Checked:
Geographic significance
Surname
Translation
ID with ID/CLASS mailboxChecked list of approved Canadian attorneys and agents
Discussed file with
Attorney/Applicant via:
phone Left message with
X email Attorney/ApplicantRequested Law Library search X Issued Examiner’s Amendment
for: and entered changes in TRADEUPSPRINT DO NOT PRINT Added design code in TRADEUPS
Description of the mark
Translation statement Re-imaged standard character
drawing
Negative translation statement
Consent of living individual Contacted TM MADRID ID/CLASS
about misclassified definite ID
Changed TRADEUPS to:
From: Mark S. Bicks <mbicks@wenderoth.com>
Sent: Thursday, May 7, 2020 12:18 PM
To: Kaplan, Valerie <Valerie.Kaplan@USPTO.GOV>
Cc: WLP <WLP@wenderoth.com>
Subject: RE: identification modification for US Trademark Application Serial No. 79270415; WLP TM20-0070
Dear Ms. Kaplan:
I authorize the additional changes in your second May 7, 2020 email to the class 7 identification to be made by Examiner’s Amendment to place the application in condition for publication.
Mark S. Bicks
Wenderoth, Lind & Ponack, L.L.P.
1025 Connecticut Avenue, NW
Suite 500
Washington, DC 20036
Telephone: (202)721-8212 (direct)
Facsimile: (202)721-8250
General e-mail: wlp@wenderoth.com
Website: www.wenderoth.com
Personal e-mail: mbicks@wenderoth.com
Confidentiality Notice:
This e-mail message and any attachments are confidential, may be privileged, and may contain proprietary information. This email is intended exclusively for the individual or entity to which it is addressed. If you are not the intended recipient, please notify Wenderoth immediately by replying to this message or by sending an e-mail to wlp@wenderoth.com, and destroy all copies of this message and any attachments. Thank you. If you are not the intended recipient, you are not authorized to read, print, copy, retain, or disseminate this email or any information included in this email.
Please copy any date-sensitive email to wlp@wenderoth.com.
For more information about Wenderoth, please visit us on the web at www.wenderoth.com
From: Kaplan, Valerie <Valerie.Kaplan@USPTO.GOV>
Sent: Thursday, May 7, 2020 12:02 PM
To: Mark S. Bicks <mbicks@wenderoth.com>
Cc: WLP <WLP@wenderoth.com>
Subject: RE: identification modification for US Trademark Application Serial No. 79270415; WLP TM20-0070
My apologies but I left out an additional modification for Class 7. The following wording needs to be slightly modified to delate the parenthesis. The changes are bolded and underlined with any deletions strikethrough.
“cooling and heating devices, including in particular heat exchangers being
(parts of machines)for stationary and mobile applications for exchanging heat between liquid and/or gaseous media”
Please let me know if the change is acceptable and I will make all changes via an Examiner’s Amendment.
Best,
Valerie Kaplan
Trademark Examining Attorney
Law Office 107
571-272-6767
All informal e-mail communications relevant to this application will be placed in the official application record.
From: Mark S. Bicks <mbicks@wenderoth.com>
Sent: Thursday, May 7, 2020 11:51 AM
To: Kaplan, Valerie <Valerie.Kaplan@USPTO.GOV>
Cc: WLP <WLP@wenderoth.com>
Subject: RE: identification modification for US Trademark Application Serial No. 79270415; WLP TM20-0070
Dear Ms. Kaplan:
I authorize the changes in your May 7, 2020 email to the class 7 and 11 identifications to be made by Examiner’s Amendment to place the application in condition for publication.
Mark S. Bicks
Wenderoth, Lind & Ponack, L.L.P.
1025 Connecticut Avenue, NW
Suite 500
Washington, DC 20036
Telephone: (202)721-8212 (direct)
Facsimile: (202)721-8250
General e-mail: wlp@wenderoth.com
Website: www.wenderoth.com
Personal e-mail: mbicks@wenderoth.com
Confidentiality Notice:
This e-mail message and any attachments are confidential, may be privileged, and may contain proprietary information. This email is intended exclusively for the individual or entity to which it is addressed. If you are not the intended recipient, please notify Wenderoth immediately by replying to this message or by sending an e-mail to wlp@wenderoth.com, and destroy all copies of this message and any attachments. Thank you. If you are not the intended recipient, you are not authorized to read, print, copy, retain, or disseminate this email or any information included in this email.
Please copy any date-sensitive email to wlp@wenderoth.com.
For more information about Wenderoth, please visit us on the web at www.wenderoth.com
From: Kaplan, Valerie <Valerie.Kaplan@USPTO.GOV>
Sent: Thursday, May 7, 2020 11:23 AM
To: WLP <WLP@wenderoth.com>
Cc: Mark S. Bicks <mbicks@wenderoth.com>
Subject: identification modification for US Trademark Application Serial No. 79270415
United States Trademark Application Serial No. 79270415 - AQUA-X
Dear Mark S. Bicks,
I am the assigned trademark examining attorney for the above-referenced application. The application will be ready to proceed once applicant agrees to modify the identification of goods in Classes 7 and 11. The changes are bolded and underlined with any deletions strikethrough. If the changes below are acceptable, I will issue an examiner's amendment accordingly:
Class 7 Fluid technology, gas technology, lubrication technology and separation technology systems and components in each case being machines or parts of machines for use in the automotive industry, for mobile hydraulics, the semiconductor industry, the food industry, aeronautics and space travel, medicine, pharmacy, oil and gas transport technology, environmental engineering, laboratory and testing technology, household systems and sanitation technology; fluid technology, gas technology, lubrication technology and separation technology systems and components in each case being machines or parts of machines for use in mining and in the field of steelworks, power plants, wind power installations, machine tools, transfer presses and plastic injection moulding machines, for lubricating oil installations for turbines, in particular gas, steam or water turbines; hydropneumatic storage units being machine parts; piston accumulators, bubble memory devices, diaphragm accumulators, bellows accumulators, spring accumulators, in each case being parts of machines and accumulator installations consisting of such accumulators, being parts of machines,
includingin the field of offshore and deep sea applications; hydraulic, hydropneumatic and reflective sound, vibration and pressure dampers, resonators, silencers, in each case being parts of machines; separators,includingin particular oil mist separators; recovery devices for lubricating oils, namely, lubricating machines; air, oil, water and hydraulic fluid filter apparatus and filters, being parts of machines, for filtration and separation technologies, usable for all technical, chemical, biological, and process engineering applications; coalescers, high-pressure, medium-pressure and low-pressure air, oil, water and hydraulic fluid filters, liquid filters, pipe filters and process pipe filters, gas filters, in particular for seal gas systems, cyclone filters and other separating filters, all of the aforesaid being parts of machines; filling filters and ventilation filters, main-flow filters and partial-flow filters, multistage filters, return flow filters,includingin particular suction filters and return-flow suction filters, tank-installed filters,includingin particular ventilating and drying units, drum filters and strip winding filters, perforated plate filters and screen filters, offline filters and inline filters and spin-on filters, plastic melt filters, membrane filters, filter units comprising drainage devices, all of the aforesaid being parts of machines; filter elements, perforated plate and screen filter elements, gap-type filter elements, rheological filter elements, flow filter elements, filter candles, filter cartridges, filter housings, filter discs and disc filter elements, filter mats, filter pots, filter cloths, filter bags, filter strips, filter packets and deep filter elements,includingin particular filter fabric materials, in each case being parts of machines; separating devices for separating liquids in relation to oil/water mixtures; cooling and heating devices,includingin particular heat exchangers (parts of machines) for stationary and mobile applications for exchanging heat between liquid and/or gaseous media; shut-off equipment, shut-off apparatus, stop valves, switch-over devices and valves being parts for machines, in particular for hydraulic and pneumatic propellants and media; inflow pressure and circulating pressure balances, flow control valves, priority valves, shuttle valves, seat valves and slide valves, throttle valves and throttles, diaphragms, directional control valves, non-return valves, pressure valves, pressure control valves and pressure limiting valves, optionally with indicators and monitors, vent valves as parts of machines; control apparatus being parts of machines, in particular for hydraulic and pneumatic installations, in particular flow-dividers and control blocks,includingin particular valve control blocks; hydraulic or pneumatic operating cylinders, being parts of machines; hydraulically and pneumatically operated or driven motors, gear boxes, couplings, pumps and compressors, all of the aforesaid being parts of machines; hydraulic or pneumatic drive units for land, air and water vehicles and being parts of machines, in particular for process engineering, for general machine construction and for vehicles, in particular for construction equipment, for machine tools, for plastic-manufacturing machines, in particular consisting of at least one hydraulic pump, at least one drive motor and at least one container of metal or plastic for liquids; hydraulic or pneumatic drive units for land, air and water vehicles and being parts of machines, in particular for the driving of tools, for presses, for transport systems, for shipping and aeronautics and space travel, for chemical and reactor technology, for mining and metallurgical plants and for rolling mills, in particular consisting of at least one hydraulic pump, at least one drive motor and at least one container of metal or plastic for liquids; hydraulic motors and engines; control apparatus, in particular electric, electro-mechanical and electro-hydraulic control apparatus being parts of machines; lubricating apparatus and equipment, lubricating installations, and liquid separators, in particular oil mist separators, supply apparatus, in particular distributors for stationary and mobile applications for pneumatic and hydraulic installations and machines; parts of hydraulic and pneumatic machines, namely, mechanically operated clamping apparatus, clamping machines and clamping tools; motor-driven hydraulic pressure and feed pumps, being parts of machines, adjustable and non-adjustable; hydraulic drive units for elevator controllers, transport controllers and lift controllers, in particular consisting of a hydraulic pump, a drive motor and a liquid container of metal or plastic; machines for industrial washing and cleaning; electric motors for machines, namely frequency-regulated motors; single and multi-stage compressors being parts of machines; blowing machines; electric, hydraulic and electro-hydraulic actuators for all types of transmissions being parts of machines, in particular for variable speed motors; lubricant separators, lubricant filter devices and lubricant filters for lubrication systems, in particular for turbines in the nature of gas motors, steam motors or hydro motors
Class 11: Separators for the cleaning and purification of liquids and water and air filters, specifically filters for heating, steam-generating, refrigerating, drying, ventilating, water supply, water treatment, air-conditioning, and sanitary installations and apparatus; filters for industrial applications for heating, steam-generating, refrigerating, drying, ventilating, water supply, water treatment, air conditioning, and sanitary installations and apparatus, namely, coalescers, high-pressure, medium-pressure and low-pressure filters, liquid filters, line filters and process line filters, gas filters, in particular for seal gas systems, cyclone filters and other separating filters, filling filters and ventilation filters, full flow filters and bypass filters, multistage filters, return flow filters, suction filters and return flow suction filters, tank-integrated filters,
includingin particular ventilating and drying devices, drum filters and strip winding filters, perforated plate filters and screen filters, offline filters and inline filters and spin-on filters, plastic melt filters, membrane filters, filter units together with draining apparatus; liquid and gas filter component parts not being parts for machines, engines, motors or land vehicles, namely, perforated plate and screen filter elements, gap-type tube filter elements, rheological filter elements, flow filter elements, filter candles, filter cartridges, filter housings, filter discs and disc filter elements, filter mats, filter pots, filter cloths, filter bags, filter strips, filter packets and deep filter elements, namely, filter fabric materials; separating devices for separating liquids in relation to oil/water mixtures, namely, separators for the cleaning and purification of liquids; heat exchangers, not being parts of machines, for stationary and mobile applications for exchanging heat between liquid and/or gaseous media; cooling units for industrial purposes and heating installations for media therein
Please let me know by email by Monday 5pm EST if you agree to allow me to correct the above by an examiner's amendment or if you have any questions about the application.
Best,
Valerie Kaplan
Trademark Examining Attorney
Law Office 107
571-272-6767
All informal e-mail communications relevant to this application will be placed in the official application record.