Offc Action Outgoing

STRICT DEADLINE TO RESPOND TO THIS NOTIFICATION: TO AVOID PARTIAL ABANDONMENT OF THE REQUEST FOR EXTENSION OF PROTECTION OF THE INTERNATIONAL REGISTRATION, THE USPTO MUST RECEIVE A COMPLETE RESPONSE TO THIS PROVISIONAL PARTIAL REFUSAL NOTIFICATION WITHIN 6 MONTHS OF THE “DATE ON WHICH THE NOTIFICATION WAS SENT TO WIPO (MAILING DATE)” LOCATED ON THE WIPO COVER LETTER ACCOMPANYING THIS NOTIFICATION.

In addition to the Mailing Date appearing on the WIPO cover letter, a holder (hereafter “applicant”) may confirm this Mailing Date using the USPTO’s Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. To do so, enter the U.S. application serial number for this application and then select “Documents.” The Mailing Date used to calculate the response deadline for this provisional partial refusal is the “Create/Mail Date” of the “IB-1rst Refusal Note.”

This is a PROVISIONAL PARTIAL REFUSAL of the request for extension of protection of the mark in the above-referenced U.S. application that applies to only the following goods in the application: switches; keyboard switches; snap switches; push button switches; sliding contact switches; rocker switches; selector switches; vane switches; wireless remote switches; key modules; controls; cooktop controls; oven controls; key modules for keyboards and keypads; sensors [measurement apparatus], other than for medical use; measuring or testing machines and instruments; telecommunication machines and apparatus; electronic machines, apparatus and their parts; power distribution or control machines and apparatus. See 15 U.S.C. §1141h(c). See below in this notification (hereafter “Office action”) for details regarding the provisional partial refusal.

The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issue(s) below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

Search Results

The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).

SUMMARY OF ISSUES:

Identification of Goods

Identification of Goods

The wording “switches; keyboard switches; snap switches; push button switches; sliding contact switches; rocker switches; selector switches; vane switches; wireless remote switches; key modules; controls; cooktop controls; oven controls; key modules for keyboards and keypads; sensors [measurement apparatus], other than for medical use; measuring or testing machines and instruments; telecommunication machines and apparatus; electronic machines, apparatus and their parts; power distribution or control machines and apparatus” in the identification of goods in International Class 9 is indefinite and must be clarified because the underline nature of the goods is unclear. See 37 C.F.R. §2.32(a)(6); TMEP §§1402.01, 1402.03, 1904.02(c), (c)(ii). .

In an application filed under Trademark Act Section 66(a), an applicant may not change the classification of goods from that assigned by the International Bureau of the World Intellectual Property Organization in the corresponding international registration. 37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1904.02(b). Therefore, although the goods may be classified in several international classes, any modification to this wording must identify goods in International Class 9 only, the class specified in the application for these goods. See TMEP §1904.02(c), (c)(ii).

Applicant may adopt the following wording in International Class 9, if accurate: Input devices for computers; computer mice; computer keyboards; electric switches; electric keyboard switches; electric snap switches; electric push button switches; electric sliding contact switches; electric rocker switches; electric selector switches; electric vane switches; electric wireless remote switches; key modules, namely, mechanical input keys for keyboards and keypads; remote controls for (indicate specific devices, e.g. radios, televisions, stereos); cooktop controls, namely, electrical controllers for use in ovens; electronic cooking oven controls; programmable key modules, namely, mechanical input keys for keyboards and keypads; measurement apparatus, namely, electric sensors, other than for medical use; measuring or testing machines and instruments, namely, level measuring machines; telecommunication machines and apparatus, namely, telecommunication cables; electronic machines, apparatus and their parts, namely, electronic control systems for machines; power distribution or control machines and apparatus, namely, electrical power distribution blocks; rotary converters; phase modifiers.

Applicant may amend the identification to clarify or limit the goods, but not to broaden or expand the goods beyond those in the original application or as acceptably amended. See 37 C.F.R. §2.71(a); TMEP §1402.06. Generally, any deleted goods may not later be reinserted. See TMEP §1402.07(e).

ID Manual Online

For assistance with identifying and classifying goods and services in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.

Assistance

Please call or email the assigned trademark examining attorney with questions about this Office action. Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the refusal(s) and/or requirement(s) in this Office action. See TMEP §§705.02, 709.06. Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record. See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05.

FAILING TO RESPOND WILL RESULT IN PARTIAL ABANDONMENT OF APPLICATION: If applicant does not respond to this Office action within the six-month period for response, the goods in International Class 9 identified above, in the beginning of this Office action, will be deleted from the application.

In such case, the application will then proceed only with the following goods in International Class 9: “Input devices for computers; computer mice; computer keyboards; rotary converters and phase modifiers.” See 37 C.F.R. §2.65(a)-(a)(1); TMEP §718.02(a).

WHO IS PERMITTED TO RESPOND TO THIS PROVISIONAL PARTIAL REFUSAL: Any response to this provisional refusal must be personally signed by an individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant (e.g., a corporate officer or general partner). 37 C.F.R. §§2.62(b), 2.193(e)(2)(ii); TMEP §712.01. If applicant hires a qualified U.S. attorney to respond on his or her behalf, then the attorney must sign the response. 37 C.F.R. §§2.193(e)(2)(i), 11.18(a); TMEP §§611.03(b), 712.01. Qualified U.S. attorneys include those in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other U.S. commonwealths or U.S. territories. See 37 C.F.R. §§2.17(a), 2.62(b), 11.1, 11.14(a); TMEP §§602, 712.01. Additionally, for all responses, the proper signatory must personally sign the document or personally enter his or her electronic signature on the electronic filing. See 37 C.F.R. §2.193(a); TMEP §§611.01(b), 611.02. The name of the signatory must also be printed or typed immediately below or adjacent to the signature, or identified elsewhere in the filing. 37 C.F.R. §2.193(d); TMEP §611.01(b).

In general, foreign attorneys are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal). See 37 C.F.R. §11.14(c), (e); TMEP §§602.03-.03(b), 608.01.

DESIGNATION OF DOMESTIC REPRESENTATIVE: The USPTO encourages applicants who do not reside in the United States to designate a domestic representative upon whom any notice or process may be served. TMEP §610; see 15 U.S.C. §§1051(e), 1141h(d); 37 C.F.R. §2.24(a)(1)-(2). Such designations may be filed online at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

/Alice Benmaman/

Examining Attorney

Law Office 116

(571) 272-9126

alice.benmaman@uspto.gov

TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

All informal e-mail communications relevant to this application will be placed in the official application record.

WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.

PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.