Offc Action Outgoing

STRICT DEADLINE TO RESPOND TO THIS NOTIFICATION: TO AVOID ABANDONMENT OF THE REQUEST FOR EXTENSION OF PROTECTION OF THE INTERNATIONAL REGISTRATION, THE USPTO MUST RECEIVE A COMPLETE RESPONSE TO THIS PROVISIONAL FULL REFUSAL NOTIFICATION WITHIN 6 MONTHS OF THE “DATE ON WHICH THE NOTIFICATION WAS SENT TO WIPO (MAILING DATE)” LOCATED ON THE WIPO COVER LETTER ACCOMPANYING THIS NOTIFICATION.

In addition to the Mailing Date appearing on the WIPO cover letter, a holder (hereafter “applicant”) may confirm this Mailing Date using the USPTO’s Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. To do so, enter the U.S. application serial number for this application and then select “Documents.” The Mailing Date used to calculate the response deadline for this provisional full refusal is the “Create/Mail Date” of the “IB-1rst Refusal Note.”

This is a PROVISIONAL FULL REFUSAL of the request for extension of protection of the mark in the above-referenced U.S. application. See 15 U.S.C. §1141h(c). See below in this notification (hereafter “Office action”) for details regarding the provisional full refusal.

The referenced application has been reviewed by the assigned trademark examining attorney. Applicant must respond timely and completely to the issues below. 15 U.S.C. §1062(b); 37 C.F.R. §§2.62(a), 2.65(a); TMEP §§711, 718.03.

Search Results

The trademark examining attorney has searched the Office’s database of registered and pending marks and has found no conflicting marks that would bar registration under Trademark Act Section 2(d). TMEP §704.02; see 15 U.S.C. §1052(d).

SUMMARY OF ISSUES that applicant must address:

Requirement – Amend Identification of Goods
Requirement – Mark Description

REQUIREMENT – AMEND IDENTIFICATION OF GOODS

The wording “Component parts of vehicles, namely bellows for vehicle shock absorbers, clutches, hand brakes, gearboxes,” “shock-absorbing buffers of rubber,” “waterproof packings,” “stopping materials,” “non-metallic waterproof membranes,” and “articles and packings of rubber used for vibration mitigation” in the identification of goods is indefinite and must be clarified because the specific nature/type of the goods, such as “structural component parts of vehicles,” “shock-absorbing buffers of rubber for industrial machinery,” etc., must be provided. See 37 C.F.R. §2.32(a)(6); TMEP §1402.01.

Applicant is advised to delete or modify the duplicate entry in the identification of goods in International Class 17 for “waterproof packings.” See generally TMEP §§1402.01, 1402.01(a). If applicant does not respond to this issue, be advised that the USPTO will remove duplicate entries from the identification prior to registration.

If modifying one of the duplicate entries, applicant may amend it to clarify or limit the goods, but not to broaden or expand the goods beyond those in the original application or as acceptably amended. See 37 C.F.R. §2.71(a); TMEP §1402.06. Also, generally, any deleted goods may not later be reinserted. TMEP §1402.07(e).

Applicant may adopt the following identification, if accurate:

Class 12: Structural component parts of vehicles, namely bellows for vehicle shock absorbers, clutches, hand brakes, gearboxes

Class 17: Raw or semi-worked rubber; shock-absorbing buffers of rubber for [specify type, such as industrial machinery]; waterproof packings for [specify use, such as automotive equipment]; packing, stopping in the nature of packing and insulating materials; flexible pipes not of metal; insulators for cables; materials for soundproofing and acoustic insulation materials; industrial insulating coatings; non-metallic [specify type, such as insulating] waterproof membranes; articles and packings of rubber used for vibration mitigation, namely, [specify type, such as insulating materials]

Class 25: acceptable as written

Applicant’s goods may be clarified or limited, but may not be expanded beyond those originally itemized in the application or as acceptably narrowed. See 37 C.F.R. §2.71(a); TMEP §§1402.06, 1904.02(c)(iv). Applicant may clarify or limit the identification by inserting qualifying language or deleting items to result in a more specific identification; however, applicant may not substitute different goods or add goods not found or encompassed by those in the original application or as acceptably narrowed. See TMEP §1402.06(a)-(b). The scope of the goods sets the outer limit for any changes to the identification and is generally determined by the ordinary meaning of the wording in the identification. TMEP §§1402.06(b), 1402.07(a)-(b). Any acceptable changes to the goods will further limit scope, and once goods are deleted, they are not permitted to be reinserted. TMEP §1402.07(e). Additionally, for applications filed under Trademark Act Section 66(a), the scope of the identification for purposes of permissible amendments is limited by the international class assigned by the International Bureau of the World Intellectual Property Organization (International Bureau); and the classification of goods may not be changed from that assigned by the International Bureau. 37 C.F.R. §2.85(d); TMEP §§1401.03(d), 1904.02(b). Further, in a multiple-class Section 66(a) application, classes may not be added or goods transferred from one existing class to another. 37 C.F.R. §2.85(d); TMEP §1401.03(d).

For assistance with identifying and classifying goods in trademark applications, please see the USPTO’s online searchable U.S. Acceptable Identification of Goods and Services Manual. See TMEP §1402.04.

REQUIREMENT – MARK DESCRIPTION

Applicant must submit a description of the mark, because one was not included in the application. 37 C.F.R. §2.37; see TMEP §§808.01, 808.02. Applications for marks not in standard characters must include an accurate and concise description of the entire mark that identifies all the literal and design elements. See 37 C.F.R. §2.37; TMEP §§808.01, 808.02, 808.03(b). In this case, the drawing of the mark is not in standard characters.

The following description is suggested, if accurate: The mark consists of the wording “SACRED” in stylized font within an oval.

WHO IS PERMITTED TO RESPOND TO THIS PROVISIONAL FULL REFUSAL: Any response to this provisional refusal must be personally signed by an individual applicant, all joint applicants, or someone with legal authority to bind a juristic applicant (e.g., a corporate officer or general partner). 37 C.F.R. §§2.62(b), 2.193(e)(2)(ii); TMEP §712.01. If applicant hires a qualified U.S. attorney to respond on his or her behalf, then the attorney must sign the response. 37 C.F.R. §§2.193(e)(2)(i), 11.18(a); TMEP §§611.03(b), 712.01. Qualified U.S. attorneys include those in good standing with a bar of the highest court of any U.S. state, the District of Columbia, Puerto Rico, and other U.S. commonwealths or U.S. territories. See 37 C.F.R. §§2.17(a), 2.62(b), 11.1, 11.14(a); TMEP §§602, 712.01. Additionally, for all responses, the proper signatory must personally sign the document or personally enter his or her electronic signature on the electronic filing. See 37 C.F.R. §2.193(a); TMEP §§611.01(b), 611.02. The name of the signatory must also be printed or typed immediately below or adjacent to the signature, or identified elsewhere in the filing. 37 C.F.R. §2.193(d); TMEP §611.01(b).

In general, foreign attorneys are not permitted to represent applicants before the USPTO (e.g., file written communications, authorize an amendment to an application, or submit legal arguments in response to a requirement or refusal). See 37 C.F.R. §11.14(c), (e); TMEP §§602.03-.03(b), 608.01.

DESIGNATION OF DOMESTIC REPRESENTATIVE: The USPTO encourages applicants who do not reside in the United States to designate a domestic representative upon whom any notice or process may be served. TMEP §610; see 15 U.S.C. §§1051(e), 1141h(d); 37 C.F.R. §2.24(a)(1)-(2). Such designations may be filed online at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.

Assistance

Please call or email the assigned trademark examining attorney with questions about this Office action. Although the trademark examining attorney cannot provide legal advice or statements about applicant’s rights, the trademark examining attorney can provide applicant with additional explanation about the requirements in this Office action. See TMEP §§705.02, 709.06. Although the USPTO does not accept emails as responses to Office actions, emails can be used for informal communications and will be included in the application record. See 37 C.F.R. §§2.62(c), 2.191; TMEP §§304.01-.02, 709.04-.05.

/Joan Blazich/

Examining Attorney

Law Office 122

571-272-7810

joan.blazich@uspto.gov

TO RESPOND TO THIS LETTER: Go to http://www.gov.uspto.report/trademarks/teas/response_forms.jsp. Please wait 48-72 hours from the issue/mailing date before using the Trademark Electronic Application System (TEAS), to allow for necessary system updates of the application. For technical assistance with online forms, e-mail TEAS@uspto.gov. For questions about the Office action itself, please contact the assigned trademark examining attorney. E-mail communications will not be accepted as responses to Office actions; therefore, do not respond to this Office action by e-mail.

All informal e-mail communications relevant to this application will be placed in the official application record.

WHO MUST SIGN THE RESPONSE: It must be personally signed by an individual applicant or someone with legal authority to bind an applicant (i.e., a corporate officer, a general partner, all joint applicants). If an applicant is represented by an attorney, the attorney must sign the response.

PERIODICALLY CHECK THE STATUS OF THE APPLICATION: To ensure that applicant does not miss crucial deadlines or official notices, check the status of the application every three to four months using the Trademark Status and Document Retrieval (TSDR) system at http://tsdr.gov.uspto.report/. Please keep a copy of the TSDR status screen. If the status shows no change for more than six months, contact the Trademark Assistance Center by e-mail at TrademarkAssistanceCenter@uspto.gov or call 1-800-786-9199. For more information on checking status, see http://www.gov.uspto.report/trademarks/process/status/.

TO UPDATE CORRESPONDENCE/E-MAIL ADDRESS: Use the TEAS form at http://www.gov.uspto.report/trademarks/teas/correspondence.jsp.